ninjette.org

Go Back   ninjette.org > 1986 - 2007 Ninja 250R > 1986 - 2007 Ninja 250R Tech Talk

Reply
 
Thread Tools
Old August 14th, 2020, 08:04 PM   #1
Tony Ambrose
ninjette.org newbie
 
Name: Tony
Location: 8610 E 30th Ter
Join Date: Aug 2020

Motorcycle(s): 2007 ninja ex250f

Posts: 4
Camshaft change issue - won't start

Ok first allow me to say that I'm grateful to be here and I have a big problem I was changing my camshaft and doing a timing when I took out my cluch and it's the housing and I put them back together and I tried to turn it over and now my engine just spins without turn over I really need help can somebody please let me know what's going on
Tony Ambrose is offline   Reply With Quote




Old August 14th, 2020, 08:18 PM   #2
Tony Ambrose
ninjette.org newbie
 
Name: Tony
Location: 8610 E 30th Ter
Join Date: Aug 2020

Motorcycle(s): 2007 ninja ex250f

Posts: 4
Camshaft change issue - won't start

Ok first allow me to say that I'm grateful to be here and I have a big problem I was changing my camshaft and doing a timing when I took out my cluch and it's the housing and I put them back together and I tried to turn it over and now my engine just spins without turn over I really need help can somebody please let me know what's going on
Tony Ambrose is offline   Reply With Quote


Old August 14th, 2020, 08:24 PM   #3
Tony Ambrose
ninjette.org newbie
 
Name: Tony
Location: 8610 E 30th Ter
Join Date: Aug 2020

Motorcycle(s): 2007 ninja ex250f

Posts: 4
Unhappy 07 ninja ex250f

Ok first allow me to say that I'm grateful to be here and I have a big problem I was changing my camshaft and doing a timing when I took out my cluch and it's the housing and I put them back together and I tried to turn it over and now my engine just spins without turn over I really need help can somebody please let me know what's going on
Tony Ambrose is offline   Reply With Quote


Old August 14th, 2020, 11:56 PM   #4
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011

Motorcycle(s): CB125T EX250F-street Ninja250R-race CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR VFR750F

Posts: A lot.
MOTY - 2018, MOTM - Nov '17
Hi Tony and welcome to Ninjette!

Why were you changing cam?
Why did you remove clutch?
Do you have factory workshop manual?

I recommend getting one before doing any more work on your engine. There’s exact procedures that must be followed to do job properly. And with issues from not being done properly, things gets much, much more complicated. Chances of destroying engine has just increased tremendously!
DannoXYZ is offline   Reply With Quote


Old August 15th, 2020, 04:45 AM   #5
Alex
ninjette.org dude
 
Alex's Avatar
 
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008

Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE, '15 CRF110F, '13 TT-R50E

Posts: Too much.
Blog Entries: 7
/moved to separate thread
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org

ninjette.org Terms of Service

Shopping for motorcycle parts or equipment? Come here first.

The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered)
Alex is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
Bike won't start and backfires when trying to start TrickyTriggs General Motorcycling Discussion 30 April 16th, 2018 08:35 PM
Camshaft issue acook3323 1986 - 2007 Ninja 250R Tech Talk 13 November 20th, 2016 09:02 PM
2009 Ninja 250 Won't Start, oil change smelled like gasoline sreisig1 2008 - 2012 Ninja 250R Tech Talk 12 May 26th, 2015 09:20 AM
Camshaft Issue jpatt87 2008 - 2012 Ninja 250R Tech Talk 42 March 25th, 2014 02:49 PM
Oil change issue? Minnesotah 2008 - 2012 Ninja 250R Tech Talk 13 August 29th, 2010 04:47 PM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 12:03 AM.


remote server monitor
Powered by vBulletin®
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2022 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are Copyright 2022 ninjette.org, All rights reserved.