Air mixture screws

J>A>V · August 9th, 2012, 07:02 PM

Can someone tell me where on the carburetor the air mixture screws are? It's for a 2006 Kawasaki ninja 250.

dirty nasty · August 9th, 2012, 07:57 PM

Underneath a plug. I would use a center punch to make a mark in the plug. drill a hole slightly smaller than a small sheet metal screw. Thread the screw into the plug a few turns so that it will hold when you pull on it with pliers.

Here's pictures.

http://faq.ninja250.org/wiki/Removin...re_screw_plugs

August 9th, 2012, 07:02 PM	#1
J>A>V ninjette.org member Name: josh Location: Cartersville Join Date: Jul 2012 Motorcycle(s): 2006 Kawasaki Ninja 250r Posts: 10 Blog Entries: 1	Air mixture screws Can someone tell me where on the carburetor the air mixture screws are? It's for a 2006 Kawasaki ninja 250.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY - Accessing and adjusting idle mixture screws	VeX	2008 - 2012 Ninja 250R Tech Talk	71	December 15th, 2017 03:38 AM
adjusting idle mixture screws	james250ninja	1986 - 2007 Ninja 250R Tech Talk	9	September 1st, 2014 10:29 AM
air/mixture screws factory setting	jgcable	1986 - 2007 Ninja 250R Tech Talk	1	July 30th, 2014 07:19 AM
Awesome tool for adjusting mixture screws - with both fairings on!	headshrink	2008 - 2012 Ninja 250R Tech Talk	6	December 5th, 2011 05:14 PM
Enrichening the Fuel Air Mixture?	Scattcatt	2008 - 2012 Ninja 250R Tech Talk	28	September 22nd, 2011 06:27 PM

August 9th, 2012, 07:57 PM	#2
dirty nasty ninjette.org sage Name: Karl Location: MA Join Date: Jun 2012 Motorcycle(s): 2000 Kwak Ninja 250 and 1998 Yamaha YZ400F Posts: 534	Underneath a plug. I would use a center punch to make a mark in the plug. drill a hole slightly smaller than a small sheet metal screw. Thread the screw into the plug a few turns so that it will hold when you pull on it with pliers. Here's pictures. http://faq.ninja250.org/wiki/Removin...re_screw_plugs