Cylinder head photos - Before porting

tubarney · January 25th, 2013, 12:08 AM

Thought I would post these now before i drop the cylinder head off so if they are not helpful I can try and take some better ones. These are of the bottom of the intake ports, valves in. Let me know what you think.

Racer x · January 25th, 2013, 05:29 AM

Thanks I can't wait to see what some one with a bench does. I do very little in the port . Just clean up the casting flash.

January 25th, 2013, 12:08 AM	#1
tubarney ninjette.org sage Name: Brad Location: Sydney Join Date: Mar 2012 Motorcycle(s): Ninja 250r 2010 SE Posts: 573	Cylinder head photos - Before porting Thought I would post these now before i drop the cylinder head off so if they are not helpful I can try and take some better ones. These are of the bottom of the intake ports, valves in. Let me know what you think.

January 25th, 2013, 05:29 AM	#2
Racer x ninjette.org certified postwhore Name: Eric Location: Iowa City Join Date: May 2009 Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X Posts: A lot. Blog Entries: 54 MOTM - Sep '18, Feb '16	Thanks I can't wait to see what some one with a bench does. I do very little in the port . Just clean up the casting flash. __________________________________________________ Top speed 123.369mph. Ohio mile Worlds fastest 250 ninja

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Interested in cylinder head studs?	garth285	2008 - 2012 Ninja 250R Tech Talk	4	September 5th, 2014 07:53 AM
Inside your head: Porting	cuong-nutz	2008 - 2012 Ninja 250R Tech Talk	4	July 18th, 2014 07:35 AM
Time for a new cylinder head	scottsa	1986 - 2007 Ninja 250R Tech Talk	10	July 6th, 2011 09:29 PM