Ninja 250 08-12 Rear Captive Spacers

DCMoney · January 30th, 2014, 06:23 AM

$40 shipped for 1 set of the rear captive spacers.

Will have more available to ship out Monday morning (2/3).

Paypal is preferred payment method. (Andrew.collins556@gmail.com)

Can also pick up locally.

See the thread below for more information, front spacers are in the works along with an axle assist pin, like seen in the thread. (Canceled)

Link

A member with a 300 was sent a set to test, judging from the part numbers and pictures they look to be the same but will have a definitive answer soon if they will work on the 300's.

Video of the prototypes in action.

Link to original page on YouTube.
Thanks,

Andrew

DCMoney · February 2nd, 2014, 07:52 AM

10 more sets made yesterday!

1 sets remaining.

mgentz · February 2nd, 2014, 08:06 AM

Money sent for 1 set.

DCMoney · February 2nd, 2014, 09:49 AM

Quote:

Originally Posted by mgentz

Money sent for 1 set.

Thanks, will ship out tomorrow.

Trailerboy531 · May 8th, 2015, 03:33 PM

So since this thread is only 15 months old I imagine it's safe to assume there are plenty more of these available?

DCMoney · May 8th, 2015, 03:46 PM

Quote:

Originally Posted by Trailerboy531

So since this thread is only 15 months old I imagine it's safe to assume there are plenty more of these available?

I make them to order. Shipped out 2 sets last week.

Trailerboy531 · May 8th, 2015, 09:24 PM

I'm in!

Let me know when is good to paypal you (I would assume now.. hah)

cuong-nutz · May 9th, 2015, 05:51 AM

in as well!

DCMoney · May 9th, 2015, 06:54 AM

I also made a few front spacers (not captive) to replace the speedo sensor. I am testing these at my next race event in 2 week.

I know of at least 1 guy that wants one, they are going to be $15 shipped if anyone else is interseted.

jschuster2 · May 9th, 2015, 12:12 PM

In also. PM sent.

cbinker · May 9th, 2015, 12:47 PM

took me a while to figure out what you were trying to sell in the video. showing the differences in design may help too.

DCMoney · June 1st, 2015, 06:00 AM

Front speedo replacement spacer now available $13 shipped.

Items are made to order usually on Saturdays then shipped out Monday after order has been placed.

CZroe · June 6th, 2015, 08:14 PM

OK, I am interested in getting a couple for two different bikes. So what makes these captive and how would I take them back out when I need to replace my bearings?

DCMoney · June 6th, 2015, 08:42 PM

Quote:

Originally Posted by CZroe

OK, I am interested in getting a couple for two different bikes. So what makes these captive and how would I take them back out when I need to replace my bearings?

Flange on the spacer locks into the dust seal. They are not overly difficult to remove and they don't destroy the dust seal. I use a pick and apply a little pressure and they come out.

The front spacer is not captive.

Example of one I made for my RC390.

Trailerboy531 · September 1st, 2015, 02:53 PM

Are you making spacers for RC390 for others?

I have friends that are buying those bikes up to race and they'd probably be interested.

DCMoney · September 1st, 2015, 04:26 PM

Quote:

Originally Posted by Trailerboy531

Are you making spacers for RC390 for others?

I have friends that are buying those bikes up to race and they'd probably be interested.

I made a set for myself but with fastfrank and Driven making sets. Id recommend buying from them.

Thanks for the consideration though.

Fishbine · April 27th, 2016, 08:24 PM

@DCMoney , are you still making the captive spacers for the 250s?

DCMoney · April 28th, 2016, 04:53 AM

Quote:

Originally Posted by Fishbine

@DCMoney , are you still making the captive spacers for the 250s?

I still make them as people request them.

cbinker · April 28th, 2016, 07:37 AM

Im down for the speedo elimination spacer.

DCMoney · April 28th, 2016, 08:11 AM

Quote:

Originally Posted by cbinker

Im down for the speedo elimination spacer.

$13 shipped, can get it in the mail tomorrow.

Fishbine · April 28th, 2016, 09:17 AM

Quote:

Originally Posted by DCMoney

I still make them as people request them.

sending a PM

toEleven · April 28th, 2016, 09:45 AM

Quote:

Originally Posted by DCMoney

A member with a 300 was sent a set to test, judging from the part numbers and pictures they look to be the same but will have a definitive answer soon if they will work on the 300's.

Did you ever get a conclusion on the 300 fit?

DCMoney · April 28th, 2016, 10:58 AM

Quote:

Originally Posted by toEleven

Did you ever get a conclusion on the 300 fit?

I never did get confirmation from the guy.

Trailerboy531 · April 29th, 2016, 12:36 PM

FWIW I've got Andrew's spacers all over my bike. Fast shipping, great communication, excellent product.

A++++++++ great seller!

CMRA609 · October 24th, 2016, 10:57 AM

i know this is an old post... but are you still making the captive spacers?

DCMoney · October 24th, 2016, 02:31 PM

Quote:

Originally Posted by CMRA609

i know this is an old post... but are you still making the captive spacers?

I am but very slowly. I saw your email will respond soon.

Thanks,

Andrew

WesleySnipes · January 23rd, 2017, 12:56 PM

PM'd.

DCMoney · January 23rd, 2017, 06:16 PM

No longer making spacers.

Thanks everyone!

January 30th, 2014, 06:23 AM	#1
DCMoney ninjette.org guru Name: Andrew Location: St Louis Join Date: Sep 2013 Motorcycle(s): Ducati 1198s, Triumph D675, Suzuki SV1000s, `08 Ninja 250, `11 Ninja 250, Suzuki GS750 Posts: 368	Ninja 250 08-12 Rear Captive Spacers $40 shipped for 1 set of the rear captive spacers. Will have more available to ship out Monday morning (2/3). Paypal is preferred payment method. (Andrew.collins556@gmail.com) Can also pick up locally. See the thread below for more information, front spacers are in the works along with an axle assist pin, like seen in the thread. (Canceled) Link A member with a 300 was sent a set to test, judging from the part numbers and pictures they look to be the same but will have a definitive answer soon if they will work on the 300's. Video of the prototypes in action. Link to original page on YouTube. Thanks, Andrew __________________________________________________ MCRA.com Last futzed with by DCMoney; February 10th, 2014 at 12:49 PM.

February 2nd, 2014, 07:52 AM	#2
DCMoney ninjette.org guru Name: Andrew Location: St Louis Join Date: Sep 2013 Motorcycle(s): Ducati 1198s, Triumph D675, Suzuki SV1000s, `08 Ninja 250, `11 Ninja 250, Suzuki GS750 Posts: 368	10 more sets made yesterday! 1 sets remaining. __________________________________________________ MCRA.com Last futzed with by DCMoney; February 9th, 2014 at 08:42 PM. Reason: Updated Quantity

May 8th, 2015, 03:33 PM	#5
Trailerboy531 Gear crash test dummy Name: Max Location: South Bay (So. Cal) Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.	So since this thread is only 15 months old I imagine it's safe to assume there are plenty more of these available? __________________________________________________ CVMA #531

May 8th, 2015, 09:24 PM	#7
Trailerboy531 Gear crash test dummy Name: Max Location: South Bay (So. Cal) Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.	I'm in! Let me know when is good to paypal you (I would assume now.. hah) __________________________________________________ CVMA #531

May 9th, 2015, 05:51 AM	#8
cuong-nutz RIP Alex Name: Cuong Location: Houston, TX Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot. Blog Entries: 2	in as well! __________________________________________________ HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days

February 2nd, 2014, 08:06 AM	#3
mgentz Board Member Name: ... Location: WI Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.	Money sent for 1 set.

May 9th, 2015, 06:54 AM	#9
DCMoney ninjette.org guru Name: Andrew Location: St Louis Join Date: Sep 2013 Motorcycle(s): Ducati 1198s, Triumph D675, Suzuki SV1000s, `08 Ninja 250, `11 Ninja 250, Suzuki GS750 Posts: 368	I also made a few front spacers (not captive) to replace the speedo sensor. I am testing these at my next race event in 2 week. I know of at least 1 guy that wants one, they are going to be $15 shipped if anyone else is interseted. __________________________________________________ MCRA.com

May 9th, 2015, 12:12 PM	#10
jschuster2 ninjette.org member Name: Jeff Location: Georgetown, Ohio Join Date: Jul 2013 Motorcycle(s): 08 Ninja 250R 81 GPZ 550 84 FJ1100 04 HD FLHCUI 12 S1000RR Posts: 13	In also. PM sent.

May 9th, 2015, 12:47 PM	#11
cbinker Track Clown Name: Chris Location: Kingman, AZ Join Date: May 2012 Motorcycle(s): '08 250R, 21 MV F3 800, Kawasaki 400 build Posts: A lot. MOTM - Sep '15	took me a while to figure out what you were trying to sell in the video. showing the differences in design may help too. __________________________________________________ TEAM ALFALFA www.apexassassins.com

June 1st, 2015, 06:00 AM	#12
DCMoney ninjette.org guru Name: Andrew Location: St Louis Join Date: Sep 2013 Motorcycle(s): Ducati 1198s, Triumph D675, Suzuki SV1000s, `08 Ninja 250, `11 Ninja 250, Suzuki GS750 Posts: 368	Front speedo replacement spacer now available $13 shipped. Items are made to order usually on Saturdays then shipped out Monday after order has been placed. __________________________________________________ MCRA.com
	1 out of 1 members found this post helpful.

June 6th, 2015, 08:14 PM	#13
CZroe CPT Falcon Name: J.Emmett Turner Location: Newnan, GA Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.	OK, I am interested in getting a couple for two different bikes. So what makes these captive and how would I take them back out when I need to replace my bearings?

September 1st, 2015, 02:53 PM	#15
Trailerboy531 Gear crash test dummy Name: Max Location: South Bay (So. Cal) Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.	Are you making spacers for RC390 for others? I have friends that are buying those bikes up to race and they'd probably be interested. __________________________________________________ CVMA #531

April 27th, 2016, 08:24 PM	#17
Fishbine ninjette.org member Name: Norm Location: Vancouver, BC Join Date: Aug 2014 Motorcycle(s): '10 Ninja 250 track bike, '06 Goldwing, '81 HD FXB Posts: 30	@DCMoney , are you still making the captive spacers for the 250s? __________________________________________________

April 28th, 2016, 07:37 AM	#19
cbinker Track Clown Name: Chris Location: Kingman, AZ Join Date: May 2012 Motorcycle(s): '08 250R, 21 MV F3 800, Kawasaki 400 build Posts: A lot. MOTM - Sep '15	Im down for the speedo elimination spacer. __________________________________________________ TEAM ALFALFA www.apexassassins.com

April 29th, 2016, 12:36 PM	#24
Trailerboy531 Gear crash test dummy Name: Max Location: South Bay (So. Cal) Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.	FWIW I've got Andrew's spacers all over my bike. Fast shipping, great communication, excellent product. A++++++++ great seller! __________________________________________________ CVMA #531

October 24th, 2016, 10:57 AM	#25
CMRA609 ninjette.org newbie Name: Mike Location: katy tx Join Date: Oct 2016 Motorcycle(s): 2013 ninja 300 Posts: 1	i know this is an old post... but are you still making the captive spacers?

January 23rd, 2017, 12:56 PM	#27
WesleySnipes ninjette.org member Name: Wesley Location: San Luis Obispo Join Date: Feb 2013 Motorcycle(s): 1999 Ninja 250ex 1989 Ninja 250ex 2005 Ninja 250ex 2007 Ninja 250ex 2011 Ninja 250r 1993 CBR600 Posts: 199	PM'd. __________________________________________________ "I had so much fun crashing my Ninja" - Said by No One Ever

January 23rd, 2017, 06:16 PM	#28
DCMoney ninjette.org guru Name: Andrew Location: St Louis Join Date: Sep 2013 Motorcycle(s): Ducati 1198s, Triumph D675, Suzuki SV1000s, `08 Ninja 250, `11 Ninja 250, Suzuki GS750 Posts: 368	No longer making spacers. Thanks everyone! __________________________________________________ MCRA.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ninja 250 Captive Spacers	DCMoney	Ninjettes At Speed	47	February 26th, 2024 10:48 AM
Captive rear brake hanger	smokinsingle	Ninjettes At Speed	29	February 5th, 2013 08:58 PM