May 13th, 2015, 08:13 PM | #1 |
ninjette.org member
Name: Mat
Location: Klamath Falls, OR
Join Date: Apr 2014 Motorcycle(s): '10 Kawasaki Ninja 250ARRRR (Sold), '13 Kawasaki Ninja 300 (Crashed), '07 Triumph Daytona 675 Posts: 45
|
WTB: Bent 300 Forks
I am looking for a pair of bent forks from a 300. Specifically, I am looking for the damper rods. If you only have one you are willing to part with, let me know. PM me with shipped price.
Thanks. Last futzed with by Lemonfresh; May 13th, 2015 at 10:22 PM. |
|
May 13th, 2015, 09:42 PM | #2 |
in your machine
Name: Scott
Location: Summer Shade, Ky.
Join Date: Oct 2014 Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN" Posts: A lot.
Blog Entries: 25
MOTM - Jun '17, May '16, Mar '15
|
I might have a pair of damping rods from my pre 94 EX500, which is the same as PreGen Ninjette, let me check, if your interested. Part # 44022 right?
__________________________________________________
violente et ignorantia ZX-2R BLOG Twitter and Instagram = Ghostt_Scott I'm not here to change your mind, just to inform. |
|
May 13th, 2015, 10:18 PM | #3 |
ninjette.org member
Name: Mat
Location: Klamath Falls, OR
Join Date: Apr 2014 Motorcycle(s): '10 Kawasaki Ninja 250ARRRR (Sold), '13 Kawasaki Ninja 300 (Crashed), '07 Triumph Daytona 675 Posts: 45
|
That is the part I am looking for. Checking part numbers now, it seems the 500, pregen, newgen, and 300 all have different part numbers.
The 500 has 38 mm forks while the 250/300 have 37 mm. I can't say either way if the damper rods are the same or not but the part numbers for each are different. |
|
May 13th, 2015, 10:21 PM | #4 |
in your machine
Name: Scott
Location: Summer Shade, Ky.
Join Date: Oct 2014 Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN" Posts: A lot.
Blog Entries: 25
MOTM - Jun '17, May '16, Mar '15
|
Well let me know, and I'll see if I can dig them up.
__________________________________________________
violente et ignorantia ZX-2R BLOG Twitter and Instagram = Ghostt_Scott I'm not here to change your mind, just to inform. |
|
May 13th, 2015, 11:26 PM | #6 | |
in your machine
Name: Scott
Location: Summer Shade, Ky.
Join Date: Oct 2014 Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN" Posts: A lot.
Blog Entries: 25
MOTM - Jun '17, May '16, Mar '15
|
Quote:
__________________________________________________
violente et ignorantia ZX-2R BLOG Twitter and Instagram = Ghostt_Scott I'm not here to change your mind, just to inform. |
|
|
May 13th, 2015, 11:27 PM | #7 |
in your machine
Name: Scott
Location: Summer Shade, Ky.
Join Date: Oct 2014 Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN" Posts: A lot.
Blog Entries: 25
MOTM - Jun '17, May '16, Mar '15
|
He looking for the guts from a bent pair of forks.
__________________________________________________
violente et ignorantia ZX-2R BLOG Twitter and Instagram = Ghostt_Scott I'm not here to change your mind, just to inform. |
|
May 14th, 2015, 07:50 AM | #9 |
in your machine
Name: Scott
Location: Summer Shade, Ky.
Join Date: Oct 2014 Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN" Posts: A lot.
Blog Entries: 25
MOTM - Jun '17, May '16, Mar '15
|
Most cases only the upper tube part # 44013 is bent, the guts are in the lower tubes part # 44005.
__________________________________________________
violente et ignorantia ZX-2R BLOG Twitter and Instagram = Ghostt_Scott I'm not here to change your mind, just to inform. |
|
May 14th, 2015, 08:46 PM | #10 |
ninjette.org member
Name: Mat
Location: Klamath Falls, OR
Join Date: Apr 2014 Motorcycle(s): '10 Kawasaki Ninja 250ARRRR (Sold), '13 Kawasaki Ninja 300 (Crashed), '07 Triumph Daytona 675 Posts: 45
|
With different part numbers I am guessing the rebound damping hole is a different size to accommodate the higher weight of the the 500. Or it might be different size compression holes. Tough to say, they are probably not the same dampers though.
|
|
June 18th, 2015, 05:27 PM | #11 |
ninjette.org member
Name: Mat
Location: Klamath Falls, OR
Join Date: Apr 2014 Motorcycle(s): '10 Kawasaki Ninja 250ARRRR (Sold), '13 Kawasaki Ninja 300 (Crashed), '07 Triumph Daytona 675 Posts: 45
|
Still looking for a set of bent forks or at least the damper rods from a 300.
Does anyone have a pair laying around they could at least put some pin gages in and find the hole size? Last futzed with by Lemonfresh; June 20th, 2015 at 07:39 AM. |
|
June 18th, 2015, 10:33 PM | #12 |
ninjette.org member
Name: Hasersys
Location: Florida
Join Date: Dec 2014 Motorcycle(s): Have owned Ninja250,EX500,Xj650,RD250,XV750 Posts: 70
|
I know this is off topic, but anyone know if the 500 tubes fit the newgen bottom halfs? I have newgen bent forks and was wanting to see if I couldn't use some 500 tubes.
|
|
June 27th, 2015, 01:06 AM | #13 |
ninjette.org member
Name: Mike
Location: Atlanta, GA
Join Date: Jun 2015 Motorcycle(s): LOTS! 14 -675R Daytona, 13 ZX6R, 14 GSXR 1000, 13 GSXR 600, 07 SV650, 14 300 Ninja, 13 300 Ninja Posts: 47
|
I've got a bent set of 300 Forks. PM me if you are still looking for some. or text me
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Need cheap '94-'09 EX500 forks to experiment with (little bent=OK). South Atlanta GMA | CZroe | Items Wanted | 4 | June 19th, 2014 07:51 PM |
forks possibly bent? | greenmachine | 2008 - 2012 Ninja 250R Tech Talk | 4 | August 9th, 2013 03:28 PM |
Are my forks bent? | dino74 | 2008 - 2012 Ninja 250R Tech Talk | 19 | April 16th, 2013 07:28 PM |
Bent Forks? | Avenged7Fold | 1986 - 2007 Ninja 250R Tech Talk | 7 | May 5th, 2012 08:17 PM |
Thread Tools | |
|
|