October 14th, 2012, 03:12 PM | #1 |
ninjette.org member
Name: Adrian
Location: New Plymouth, New Zealand
Join Date: Oct 2012 Motorcycle(s): '09 Ninjette (Black(and some blue)) Posts: 25
|
Protons, integrated tail light and bi-xenon headlight
Hi Guys and Girls,
I'm going to be installing the above in a few days/weeks (once they arrive). I'm going to be leaving the stock indicators on the back as well as the integrated tail light. I've also got a yosi fender eliminator coming with the LED number plate lighting. My question is....... With the list of mods above, will I need the Diode kit and flasher relay that I see mentioned in a lot of the other posts that I have been reading? If I do need them, does anyone know where I can purchase them, that ships to New Zealand? Thanks Adrian |
|
October 15th, 2012, 04:24 PM | #2 |
ninjette.org sage
Name: Brian
Location: Orange County, CA
Join Date: Apr 2012 Motorcycle(s): '12 ninja 250r Posts: 762
|
Yes. 4 or more LEDS you need diode. You need the new flasher relay anyway.
|
|
October 16th, 2012, 08:36 AM | #3 |
ModMy250.com
Name: Tri
Location: St, Louis
Join Date: Sep 2010 Motorcycle(s): 2009 Ninja 250R, 2005 R6 Posts: A lot.
|
Hi Adrian,
The relay is a must. If you plan on leaving the oem indicators on the rear and working, then you shouldn't need a diode kit. That being said, if you ever end up wanting to remove them, then you'll definitely need one. The diode kit will work in the bike, even in a stock setup, so you can always install one now and not worry about it later. I ship worldwide. I just don't have every country listed. You can pm me for a shipping quote. Thanks! Tri
__________________________________________________
The www.ModMy250.com guy |
|
October 16th, 2012, 12:41 PM | #4 | |
ninjette.org member
Name: Adrian
Location: New Plymouth, New Zealand
Join Date: Oct 2012 Motorcycle(s): '09 Ninjette (Black(and some blue)) Posts: 25
|
Quote:
I got impatient, and found another site, but I will recommend you to anyone else I know who is moding a ninjette. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wire integrated tail light such that the brake light stays off while signal flashes? | CZroe | 2008 - 2012 Ninja 250R Tech Talk | 6 | March 4th, 2012 06:36 PM |
FS: Original brake light or FDB integrated tail light (current generation) | CZroe | Motorcycle-related | 9 | September 11th, 2011 06:23 PM |
|
|