September 18th, 2013, 11:55 AM | #1 |
ninjette.org member
Name: Sunspots
Location: Austin, TX
Join Date: Jun 2013 Motorcycle(s): 08 Plasma Blue 250 Posts: 56
|
Missing bolt / Someone tried to steal my bike?
Ok, so I'm 100% certain this wasn't like this before, but sometime between last night and today, I noticed that this bolt was missing near the choke.
Does anyone know what size bolt that is and where I would be able to get a new one. Also would I be able to continue riding the bike safely without replacing that bolt? |
|
September 18th, 2013, 11:58 AM | #2 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
Ride on brah! Your missing the little black plug. In fact, there is nothing in that hole from the factory. It's reserved for an accessory, mirror, gps clamp and so on.
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
September 18th, 2013, 11:58 AM | #3 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
ps, your bar is bent.
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
September 18th, 2013, 12:00 PM | #4 |
ninjette.org member
Name: Sunspots
Location: Austin, TX
Join Date: Jun 2013 Motorcycle(s): 08 Plasma Blue 250 Posts: 56
|
Awesome.
I guess that was a bit paranoiac of me to immediately think that some bastard tried to steal it lol. |
|
September 18th, 2013, 12:05 PM | #5 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
Take a deep breath.
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
September 18th, 2013, 12:05 PM | #6 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
You got 'em.
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
1 out of 1 members found this post helpful. |
September 18th, 2013, 12:08 PM | #7 |
ninjette.org member
Name: Sunspots
Location: Austin, TX
Join Date: Jun 2013 Motorcycle(s): 08 Plasma Blue 250 Posts: 56
|
|
|
September 18th, 2013, 12:12 PM | #8 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
It's not bent that much, nothing major. But if you wanna fix it; Remove it, put it in a vice and bend it back straight. Getting the bar ends (weights) off will be the hardest part. Roll it on something flat and try to get it to roll as smoothly as possible. Should be a fun Sat. afternoon project.
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
September 19th, 2013, 05:36 AM | #9 |
Are you sure about that?
Name: That's "Sir" to you!
Location: Chorleywood (Nr. London)
Join Date: Sep 2012 Motorcycle(s): Ninja 250R-F16, Versys KLE650 CAF Posts: 418
|
Hmm! Does anybody know anything about that little hole? What's the diameter? Is it screw-threaded? Does anybody use it ... if so, what for?
|
|
September 19th, 2013, 06:08 AM | #10 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
I don't think it's threaded from kawi. Since you plug is missing, do you see any threads in there? Maybe a previous owner tapped it. If it's not already tapped, then you have some options. Check out what this guy did.
http://forums.ninja250.org/viewtopic...ight=gps+mount
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
September 19th, 2013, 06:09 AM | #11 |
ninjette.org member
Name: Garrett
Location: Illinois - Midwest USA
Join Date: Jul 2013 Motorcycle(s): ZX-3R (ok, ex300) Posts: 160
|
it's threaded (or should be). just like stated above, it's an accessory hole. it will take mirrors (most non-sportbikes have mirrors mounted on the bars) and accessory mounts.
|
|
September 19th, 2013, 06:16 AM | #12 |
Are you sure about that?
Name: That's "Sir" to you!
Location: Chorleywood (Nr. London)
Join Date: Sep 2012 Motorcycle(s): Ninja 250R-F16, Versys KLE650 CAF Posts: 418
|
|
|
September 19th, 2013, 06:24 AM | #13 |
ninjette.org member
Name: Mitchell
Location: Australia
Join Date: Jun 2013 Motorcycle(s): 2009 Ninja 250 Posts: 58
|
It should definitely be threaded. I put a mirror from my dads bike in there to test it the other day.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Two Brothers Slip on missing bolt | cadd | 2008 - 2012 Ninja 250R Tech Talk | 1 | May 11th, 2014 04:51 AM |
Missing essential bolt! Need help! | Floki | 2008 - 2012 Ninja 250R Tech Talk | 4 | October 6th, 2013 03:08 PM |
Center Stem Bolt MISSING! | BRad704 | 2008 - 2012 Ninja 250R Tech Talk | 6 | August 12th, 2013 08:55 AM |
fairing bolt missing | kittyslasher | 2008 - 2012 Ninja 250R Tech Talk | 3 | July 30th, 2013 04:44 PM |
Help with missing bolt | dk58 | 2008 - 2012 Ninja 250R Tech Talk | 22 | May 11th, 2011 07:07 PM |
|
|