May 10th, 2014, 07:09 AM | #1 |
Wannabe Reborn
Name: Unregistered
Location: Cincy Ohio
Join Date: Mar 2009 Motorcycle(s): Blue 2008 Ninja 250 Posts: 302
|
Front Brake Lever Wont Activate Brake Light
I'm looking at wiring schematics, but was wondering if anyone had this issue? The rear brake will activate the brake light, but using the front brake, the light won't come on. Any help would be appreciated.
Thanks~
__________________________________________________
" If you're here to show off and prove that your crotch rocket is faster than my Harley, you can leave now. " |
|
May 10th, 2014, 07:10 AM | #2 |
ninjette.org member
Name: Ken
Location: Central New Jersey
Join Date: Oct 2013 Motorcycle(s): 2009 Kawasaki Ninja 250R Posts: 219
|
did it work prior? or has it never worked before?
|
|
May 10th, 2014, 07:12 AM | #3 | |
Daily Ninjette rider
Name: Hernan
Location: Florida
Join Date: Mar 2011 Motorcycle(s): 2007 Ninja 250 Posts: A lot.
MOTY - 2016, MOTM - Dec '12, Jan '14, Jan '15, May '16
|
Quote:
In your case, look for a defective switch or open circuit (loose connectors or broken wires) for the front portion.
__________________________________________________
Motofool .................................Never ride faster than your guardian angel can fly "Mankind is composed of two sorts of men — those who love and create, and those who hate and destroy. Love is the bond between men, the way to teach and the center of the world." - José Martí |
|
|
May 10th, 2014, 08:09 AM | #4 |
Wannabe Reborn
Name: Unregistered
Location: Cincy Ohio
Join Date: Mar 2009 Motorcycle(s): Blue 2008 Ninja 250 Posts: 302
|
I bought bike used, 8,000 miles. PO not available to answer. Just trying to fix up little things. He hacked this bike pretty good. I tore it down in November to jet carbs, remove air box, pod filters. Fuse for horn is removed, but when I replaced it, it works. He removed license plate light for a crap hack of the fender eliminator, and left wires dangling in rear compartment.
Is the front switch part of the lever assembly, or separate?
__________________________________________________
" If you're here to show off and prove that your crotch rocket is faster than my Harley, you can leave now. " |
|
May 10th, 2014, 08:13 AM | #5 | |
ninjette.org member
Name: Kurt
Location: Knoxville
Join Date: Oct 2012 Motorcycle(s): '04 R1 and '08 Ninja 250 Posts: 222
|
Quote:
Separate: http://www.mrcycles.com/oemparts/a/k...aster-cylinder
__________________________________________________
Check out this Ninja 250 roadracing youth---> TheDraik77 <--- My son |
|
|
May 10th, 2014, 08:18 AM | #6 |
Wannabe Reborn
Name: Unregistered
Location: Cincy Ohio
Join Date: Mar 2009 Motorcycle(s): Blue 2008 Ninja 250 Posts: 302
|
Awesome. Tearing bike apart now. Thanks all for help.
__________________________________________________
" If you're here to show off and prove that your crotch rocket is faster than my Harley, you can leave now. " |
|
May 10th, 2014, 11:56 AM | #7 |
Wannabe Reborn
Name: Unregistered
Location: Cincy Ohio
Join Date: Mar 2009 Motorcycle(s): Blue 2008 Ninja 250 Posts: 302
|
Was able to get down to just the switch, and its bad. I can move the prongs on the switch and get good readings with my meter, but just moving the prong will make or break the switch. Going to get a replacement.
Also, I didn't check while I was there, but I should be able to get voltage on one of the wires coming in, correct?
__________________________________________________
" If you're here to show off and prove that your crotch rocket is faster than my Harley, you can leave now. " |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Front brake wont activate tail light | radi4fun | 2008 - 2012 Ninja 250R Tech Talk | 2 | April 24th, 2013 06:37 AM |
Rear Brake Doesn't activate Brake Light And DOT3/4 FRONT BRAKE OIL | coelgrim | 2008 - 2012 Ninja 250R Tech Talk | 16 | March 11th, 2013 05:10 PM |
Rear brake wont activate brake light-HELP | skilletmo | 2008 - 2012 Ninja 250R Tech Talk | 8 | March 9th, 2013 11:09 AM |
|
|