Powercommander without Pro custom map

Trixxr · January 5th, 2010, 04:23 PM

Hey guys!
I was wondering...
I installed a full system Yoshimura exhaust on my FI Ninjette, and now i'm going to buy a powercommander for it.
But do you really think it's needed for me, to get it on a dyno, and have a pro make a custom map for it? Or would the pre programmed custom map that's available on the Powercommander website, do the job just fine?

The custom map on the website, is made for the 250r with a full system Yoshimura installed.

I know that I'm asking a question that I've already answered, i just want to be completely sure!

(the reason for me making a thread about it, is that i've never been a member of the powercommander world, so i have absolutly no idea, if the small differences in the map, are able to kill your bike or not!)

HKr1 · January 6th, 2010, 11:47 AM

If you got the PC-V, just get the auto tune module. If you got the PCIII, you can go with there map, its probably close.

You can also throw the PCIII into program mode, adjust the low/mid/high rpm ranges. Kinda just like jetting a carb

Trixxr · January 6th, 2010, 12:16 PM

Seems like i'll be the one to throw in a How to install a powercommander DYI! (:
Thanks for the answer, i'll order one, and see where it brings me.

HKr1 · January 6th, 2010, 02:35 PM

You can enter to win a new PC(or pc stuff). I been putting in 09 FZ1 once a month, hoping to win the new PC-V for my 06 R1.

http://www.powercommander.com/powerc..._giveaway.aspx

ztrack157 · January 6th, 2010, 03:13 PM

PCV other wise you'll need a custom map probably. The climate is alot different from place to place and unless the custom map is setup for Denmark (which I don't know) you may hit issues.

maglin · January 7th, 2010, 03:15 AM

I'm watching this thread

Trixxr · January 7th, 2010, 05:48 AM

Gonna call my Dynojet pusher, and have a chitchat with him! (:
He'll probably tell me what the most optimal thing would be.

And again, the price does actually make a bit of a difference, or atleast, that's the reason i'm not gonna go with the Custom map solution, as my first choice.

Getting a powercommander is somewhat near 250$, but with the custom map and a K&N Filter, the price would rise to nothing less, than 1250$. I guess you can see why i'm searching for alternative ways of getting more juice out of my bike

maglin · January 7th, 2010, 07:54 AM

Where did you find PC V with 250$ ??

I want it too!!

ztrack157 · January 7th, 2010, 08:35 AM

Thats probably the PC3 not the PCV.

Trixxr · January 7th, 2010, 10:45 AM

Sorry! I'm completly wrong! It's around 400-450, sorry!
Wouldnt it be easier if the US just adopted the danish currency? Jesus.

maglin · January 7th, 2010, 10:50 AM

Quote:

Originally Posted by Trixxr

Sorry! I'm completly wrong! It's around 400-450, sorry!
Wouldnt it be easier if the US just adopted the danish currency? Jesus.

ztrack157 · January 7th, 2010, 12:43 PM

Xaris I can hook you up with a PCV for pretty cheap if your ever interested.

maglin · January 7th, 2010, 01:29 PM

Sure Matt, I would be interested in a couple of months if my finance is in good condition.

If you can find it under 300$ it would be nice!

ztrack157 · January 7th, 2010, 01:34 PM

PC3 are $300 PCV $325

HKr1 · January 7th, 2010, 02:04 PM

Motomummy has the pcV for 275.00(shipped). Iam sure Corey would have to special order the 250r pc thou(& overseas shipping a tad more).

ztrack157 · January 7th, 2010, 02:34 PM

Ya the prices I am listing are what Bram at sportisi charges. If you can find it cheaper elsewhere than by all means get that. I'm in the interest of saving people money.

maglin · January 15th, 2010, 02:54 AM

Quote:

Originally Posted by ztrack157

PC3 are $300 PCV $325

Matt, do these prices include shipping in US?

ps. I contacted motommumy but they don't bring this model.

ztrack157 · January 15th, 2010, 03:42 AM

Those are the prices from bram. I will have to check on the shipping cost to Greece.

Vatos_locos · January 15th, 2010, 03:47 AM

$278.00 http://www.kneedraggers.com/details/...0--642292.html

maglin · January 15th, 2010, 07:12 AM

Quote:

Originally Posted by Vatos_locos

$278.00 http://www.kneedraggers.com/details/...0--642292.html

I know you !

HKr1 · January 15th, 2010, 08:21 AM

Quote:

Originally Posted by maglin

I contacted motommumy but they don't bring this model.

Bummer..... I wonder if DJ just wont supply it to US outlets, or they just didnt see it listed on there stuff??

Should go here:
http://www.sportbikeforum.net/forum/

This is the old motomummy forum, renamed. PM Corey, "gsxcorey" and see if he can help, he would at least be able to let you know what the reason is either way.

He's also on the R1forum allot too, same screen name

Vatos_locos · January 15th, 2010, 11:02 AM

Quote:

Originally Posted by maglin

I know you !

lol i was wondering if you are in the Greek forums too

January 5th, 2010, 04:23 PM	#1
Trixxr ninjette.org member Name: Anders Location: Denmark Join Date: Nov 2009 Motorcycle(s): Ninja 250r Posts: 42	Powercommander without Pro custom map Hey guys! I was wondering... I installed a full system Yoshimura exhaust on my FI Ninjette, and now i'm going to buy a powercommander for it. But do you really think it's needed for me, to get it on a dyno, and have a pro make a custom map for it? Or would the pre programmed custom map that's available on the Powercommander website, do the job just fine? The custom map on the website, is made for the 250r with a full system Yoshimura installed. I know that I'm asking a question that I've already answered, i just want to be completely sure! (the reason for me making a thread about it, is that i've never been a member of the powercommander world, so i have absolutly no idea, if the small differences in the map, are able to kill your bike or not!)

January 6th, 2010, 03:13 PM	#5
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	PCV other wise you'll need a custom map probably. The climate is alot different from place to place and unless the custom map is setup for Denmark (which I don't know) you may hit issues. __________________________________________________ Sportisimoto USA is born.

January 7th, 2010, 03:15 AM	#6
maglin ninjette.org member Name: xaris Location: greece Join Date: Aug 2009 Motorcycle(s): what else? Posts: 121	I'm watching this thread __________________________________________________ -This signature rocks!!!

January 7th, 2010, 07:54 AM	#8
maglin ninjette.org member Name: xaris Location: greece Join Date: Aug 2009 Motorcycle(s): what else? Posts: 121	Where did you find PC V with 250$ ?? I want it too!! __________________________________________________ -This signature rocks!!! Last futzed with by maglin; January 7th, 2010 at 08:57 AM.

January 7th, 2010, 08:35 AM	#9
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	Thats probably the PC3 not the PCV. __________________________________________________ Sportisimoto USA is born.

January 6th, 2010, 11:47 AM	#2
HKr1 IC2(SW) Name: Kerry Location: Pensacola Join Date: Nov 2008 Motorcycle(s): . Posts: A lot.	If you got the PC-V, just get the auto tune module. If you got the PCIII, you can go with there map, its probably close. You can also throw the PCIII into program mode, adjust the low/mid/high rpm ranges. Kinda just like jetting a carb

January 6th, 2010, 12:16 PM	#3
Trixxr ninjette.org member Name: Anders Location: Denmark Join Date: Nov 2009 Motorcycle(s): Ninja 250r Posts: 42	Seems like i'll be the one to throw in a How to install a powercommander DYI! (: Thanks for the answer, i'll order one, and see where it brings me.

January 6th, 2010, 02:35 PM	#4
HKr1 IC2(SW) Name: Kerry Location: Pensacola Join Date: Nov 2008 Motorcycle(s): . Posts: A lot.	You can enter to win a new PC(or pc stuff). I been putting in 09 FZ1 once a month, hoping to win the new PC-V for my 06 R1. http://www.powercommander.com/powerc..._giveaway.aspx

January 7th, 2010, 05:48 AM	#7
Trixxr ninjette.org member Name: Anders Location: Denmark Join Date: Nov 2009 Motorcycle(s): Ninja 250r Posts: 42	Gonna call my Dynojet pusher, and have a chitchat with him! (: He'll probably tell me what the most optimal thing would be. And again, the price does actually make a bit of a difference, or atleast, that's the reason i'm not gonna go with the Custom map solution, as my first choice. Getting a powercommander is somewhat near 250$, but with the custom map and a K&N Filter, the price would rise to nothing less, than 1250$. I guess you can see why i'm searching for alternative ways of getting more juice out of my bike

January 7th, 2010, 10:45 AM	#10
Trixxr ninjette.org member Name: Anders Location: Denmark Join Date: Nov 2009 Motorcycle(s): Ninja 250r Posts: 42	Sorry! I'm completly wrong! It's around 400-450, sorry! Wouldnt it be easier if the US just adopted the danish currency? Jesus.

January 7th, 2010, 12:43 PM	#12
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	Xaris I can hook you up with a PCV for pretty cheap if your ever interested. __________________________________________________ Sportisimoto USA is born.

January 7th, 2010, 01:29 PM	#13
maglin ninjette.org member Name: xaris Location: greece Join Date: Aug 2009 Motorcycle(s): what else? Posts: 121	Sure Matt, I would be interested in a couple of months if my finance is in good condition. If you can find it under 300$ it would be nice! __________________________________________________ -This signature rocks!!!

January 7th, 2010, 01:34 PM	#14
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	PC3 are $300 PCV $325 __________________________________________________ Sportisimoto USA is born.

January 7th, 2010, 02:04 PM	#15
HKr1 IC2(SW) Name: Kerry Location: Pensacola Join Date: Nov 2008 Motorcycle(s): . Posts: A lot.	Motomummy has the pcV for 275.00(shipped). Iam sure Corey would have to special order the 250r pc thou(& overseas shipping a tad more).

January 7th, 2010, 02:34 PM	#16
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	Ya the prices I am listing are what Bram at sportisi charges. If you can find it cheaper elsewhere than by all means get that. I'm in the interest of saving people money. __________________________________________________ Sportisimoto USA is born.

January 15th, 2010, 03:42 AM	#18
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	Those are the prices from bram. I will have to check on the shipping cost to Greece. __________________________________________________ Sportisimoto USA is born.

January 15th, 2010, 03:47 AM	#19
Vatos_locos ninjette.org member Name: Panos Location: Greece Join Date: Dec 2009 Motorcycle(s): Ninja 250R Posts: 13	$278.00 http://www.kneedraggers.com/details/...0--642292.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PowerCommander V for sale	Guinss	Motorcycle-related	2	June 6th, 2012 11:53 AM
Looking for map...	psych0hans	2008 - 2012 Ninja 250R Tech Talk	5	June 4th, 2012 07:49 AM
PowerCommander V (PCV)	Guinss	2008 - 2012 Ninja 250R Tech Talk	16	July 9th, 2010 09:11 AM
Leo Vince exhaust slip on powercommander maps	menno	2008 - 2012 Ninja 250R Tech Talk	3	June 27th, 2010 06:59 AM
Posting a map	lockie	Help	2	May 20th, 2009 10:30 AM