February 17th, 2022, 10:41 PM | #1 |
ninjette.org member
Name: Dustin
Location: NC
Join Date: Oct 2021 Motorcycle(s): 250r Posts: 80
|
Ninja Tail
Ok so I got bored couldn't sleep looking at bikes and stuff had a idea and partly did it.... Has anyone on her took the license plate plastic off that hold the turn signals off.... It's 4 bolts so I did it to see how it looks I'll see if my phone will post a pic in min but the tail light had only one bulb in the middle was thinking of totally getting rid of the turn signals and the plastic I took off the lenses on each side next to the middle tail light has holes were a bulb could be placed using the turn signals wiring anyone else done this looks cleaner to me let's see if I can post a pic.....
|
|
February 17th, 2022, 11:03 PM | #2 |
ninjette.org member
Name: Dustin
Location: NC
Join Date: Oct 2021 Motorcycle(s): 250r Posts: 80
|
I think it looks good.......
1645163422073.jpg 1645163452283.jpg 1645163458915.jpg 1645163477628.jpg |
|
February 17th, 2022, 11:06 PM | #3 |
ninjette.org member
Name: Dustin
Location: NC
Join Date: Oct 2021 Motorcycle(s): 250r Posts: 80
|
This is what I gotta figure out is how to rig up the tail lights to the empty holes next to the break light so it looks cleaner.....
1645163468439.jpg |
|
February 18th, 2022, 11:14 AM | #4 | |
ninjette.org guru
Name: Anthony
Location: Vinita, Ok
Join Date: Sep 2021 Motorcycle(s): 07 Kawasaki Ninja 250 Posts: 343
|
Quote:
Yon can get clear lens off ebay and add amber bulbs |
|
|
March 5th, 2022, 10:17 AM | #5 |
ninjette.org member
Name: Honorio
Location: Rio Grande Valley
Join Date: Aug 2020 Motorcycle(s): Ninja EX250 Posts: 118
Blog Entries: 8
|
looking at mine, someone added an led strip to one side and it has a wire hanging off of it... not attatched... I'm curious about adding two other lights to the other holes. what did you end up doing??
__________________________________________________
RIDE IT UNTIL THE WHEELS FALL OFF, THEN BUY NEW WHEELS |
|