ninjette.org

Go Back   ninjette.org > Marketplace > Motorcycle-related

Notices

Closed Thread
 
Thread Tools
Old October 8th, 2018, 04:47 AM   #1
tgold
ninjette.org sage
 
Name: Timm
Location: West Seneca, NY
Join Date: Oct 2015

Motorcycle(s): 2006 1050 Speed Triple, 2010 250 Ninja racebike, YZF320RR? Racebike

Posts: 556
MOTM - Nov '15
Ninja 250/300 Super Light with Lots of Mods (New Price)

New Price: $2000.00

2017 SOAR Lightweight Endurance Championship Winner

A super fun bike that we won 5 out of 6 Endurance races with SOAR in Ontario last year when it was still a 250. (Somewhere around 10 wins total.) The bike is set up well with a Fox Twin clicker shock in the rear with custom aluminum dogbones and emulators in the front with custom mixed oil. The frame is detabbed with many mods to bring it under 290 pounds.
It should be clear, but let me just say that this bike is NOT Supersport legal and it would be a waste of time to try to go back and do that. That said, this is a very fun bike to ride It started out as a 250 and I just put a super low mileage 300 Ninja motor in it this year. I decided to forego the Ninja fuel injection hassle and stuck with the carbs and ignition from the 250. Minimal wiring harness. The exhaust is an Area P with slight mods to fit the 300 motor.It definitely pulls harder than the old 250 motor and that was pretty strong. It has two sets of stock wheels with captive spacers. and an extra 4 inch 300 Ninja rear to properly fit the 150 sized tires or the 3.5 inch rear to fit a 140 sized tire like the Pirelli Supercorsas. Also has custom quick change bits for wheel swaps in about two minutes. Faster if you practice a little. The second set has rains that are well used but they actually worked really well the last time out. Custom light weight fairing stay, Hotbodies that need a little love, they've been repaired a bunch but they can work or you could save 3 or 4 pounds by putting on a new set. Woodcraft Brake Lever guard.EBC floating rotor in the front works very well. I used it for endurance racing so it has a full dry break setup. 13, 14& 15 tooth front sprockets plus 45 and 46 tooth rears. Lithium battery, chinese rearsets, I also have at least three sets of brand new but old build date (2007) of 125cc sized slicks that'll go with the bike if you want 'em. I tried a set out at Pittrace and they worked pretty well with the rear sliding predictably when I really started to push it. Woodcraft clipons and I'm sure a bunch of little details I forgot. It's a fantastic bike in the rain too. Never thought I'd drag my knee in the wet, but this bike makes it easy. Most confidence inspiring bike in the rain that I've ever owned.
I have a fairly fresh set of Dunlop Alpha 13s on it. Only two endurance races, a sprint and a few trackdays this year.
I enjoy taking stock bikes and modifying the hell out of them, riding them for three or four years and then selling and doing it all over again. I'm looking to build a dream supermono racebike this time and the TIG welder is ready, so it's time for the little beast to go. I have a bunch of misc spare bits and a steering damper I never installed that'll go with the bike. Comes with four gallon dry break jug. Front stand customized for fast wheel swaps goes with the bike.


I can move a little on the price if you don't want the dry break setup.
Located in Buffalo NY

PM or message me at: 716 tree ait ait seven ait two four
Attached Images
File Type: jpg SOAR Round Two Ninja B.jpg (69.2 KB, 15 views)
File Type: jpg 20181004_190531 B.jpg (257.7 KB, 16 views)
File Type: jpg 20181004_190542 b.jpg (261.5 KB, 17 views)
File Type: jpg 20181004_191242b.jpg (290.4 KB, 15 views)
File Type: jpg 20181004_191252b.jpg (251.9 KB, 16 views)

Last futzed with by tgold; December 4th, 2018 at 08:58 PM.
tgold is offline  




Old October 8th, 2018, 04:50 AM   #2
tgold
ninjette.org sage
 
Name: Timm
Location: West Seneca, NY
Join Date: Oct 2015

Motorcycle(s): 2006 1050 Speed Triple, 2010 250 Ninja racebike, YZF320RR? Racebike

Posts: 556
MOTM - Nov '15
Mo pics:
Attached Images
File Type: jpg 20181004_191303b.jpg (241.7 KB, 7 views)
File Type: jpg 20181004_191312b.jpg (128.6 KB, 10 views)
File Type: jpg 20181004_191359b.jpg (270.0 KB, 8 views)
File Type: jpg 20181004_191441b.jpg (246.9 KB, 14 views)
File Type: jpg 20181004_191445b.jpg (221.4 KB, 9 views)
File Type: jpg 20181004_193041b.jpg (265.6 KB, 7 views)
File Type: jpg 20181004_193051b.jpg (269.6 KB, 6 views)
File Type: jpg 20181004_193102b.jpg (271.1 KB, 4 views)
File Type: jpg 20181004_193141b.jpg (219.1 KB, 4 views)
tgold is offline  


Old October 11th, 2018, 09:49 AM   #3
tgold
ninjette.org sage
 
Name: Timm
Location: West Seneca, NY
Join Date: Oct 2015

Motorcycle(s): 2006 1050 Speed Triple, 2010 250 Ninja racebike, YZF320RR? Racebike

Posts: 556
MOTM - Nov '15
OK, $2200.00 WITH the endurance setup.

Minimal wiring harness with keyless ignition switch.

13, 14, 15 tooth front sprockets
45 & 46 tooth rear sprockets
Extra sprocket carrier
Stock rearsets
Extra carb parts
tgold is offline  


Old October 11th, 2018, 06:54 PM   #4
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011

Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C

Posts: A lot.
MOTY - 2018, MOTM - Nov '17
OOohh.... very cool build! So ah, what's it weigh with 1-gallon of gas in it?
DannoXYZ is offline  


Old October 12th, 2018, 04:11 AM   #5
tgold
ninjette.org sage
 
Name: Timm
Location: West Seneca, NY
Join Date: Oct 2015

Motorcycle(s): 2006 1050 Speed Triple, 2010 250 Ninja racebike, YZF320RR? Racebike

Posts: 556
MOTM - Nov '15
Quote:
Originally Posted by DannoXYZ View Post
OOohh.... very cool build! So ah, what's it weigh with 1-gallon of gas in it?
Depends on the wheel/tire combo. With stock size wheels & Moto3 size slicks it's about 290lb. With the Ninja 300 rear and Alpha 13's it's about 296lb. Could easily shed 3 or 4 more pounds by putting on a new fairing. I've even thought of putting Honda RS125 wheels on it. That would knock off another 8 or 10 pounds. We were already crushing our competition on a regular basis so I didn't see the need.
tgold is offline  


Old October 16th, 2018, 01:05 PM   #6
tgold
ninjette.org sage
 
Name: Timm
Location: West Seneca, NY
Join Date: Oct 2015

Motorcycle(s): 2006 1050 Speed Triple, 2010 250 Ninja racebike, YZF320RR? Racebike

Posts: 556
MOTM - Nov '15
Have salvage title from previous owner.
tgold is offline  


Old December 4th, 2018, 09:06 PM   #7
tgold
ninjette.org sage
 
Name: Timm
Location: West Seneca, NY
Join Date: Oct 2015

Motorcycle(s): 2006 1050 Speed Triple, 2010 250 Ninja racebike, YZF320RR? Racebike

Posts: 556
MOTM - Nov '15
New price: $2000.00
tgold is offline  


Old December 20th, 2018, 06:19 AM   #8
tgold
ninjette.org sage
 
Name: Timm
Location: West Seneca, NY
Join Date: Oct 2015

Motorcycle(s): 2006 1050 Speed Triple, 2010 250 Ninja racebike, YZF320RR? Racebike

Posts: 556
MOTM - Nov '15
Trade Pending.....
tgold is offline  


Old January 27th, 2019, 06:29 AM   #9
tgold
ninjette.org sage
 
Name: Timm
Location: West Seneca, NY
Join Date: Oct 2015

Motorcycle(s): 2006 1050 Speed Triple, 2010 250 Ninja racebike, YZF320RR? Racebike

Posts: 556
MOTM - Nov '15
The Little Beast is headed to a new home. Snif
tgold is offline  


Old January 27th, 2019, 02:10 PM   #10
Alex
ninjette.org dude
 
Alex's Avatar
 
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008

Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE, '15 CRF110F, '13 TT-R50E

Posts: Too much.
Blog Entries: 7
Awwww.......
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org

ninjette.org Terms of Service

Shopping for motorcycle parts or equipment? Come here first.

The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered)
Alex is offline  


Closed Thread




Similar Threads
Thread Thread Starter Forum Replies Last Post
LittleRedNinjettes 300 mods n' stuff (lots of pics) LittleRedNinjette 2013 - 2017 Ninja 300 General Discussion 99 December 3rd, 2016 08:49 AM
2005 Ninja 250 $2000 -- Lots of mods!! NealWright Motorcycle-related 2 March 24th, 2015 03:25 AM
'09 Ninja 250R - LOTS OF MODS! - Michigan Brently7785 Motorcycle-related 4 June 13th, 2010 10:46 PM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 12:59 PM.


Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are © Copyright 2022 ninjette.org, All rights reserved.