|
August 6th, 2023, 03:43 AM
|
#1 |
|
ninjette.org newbie
Name: Leo
Location: Australia
Join Date: Aug 2023 Motorcycle(s): Ninja 250 Posts: 7
|
Clutch Plate Part different
I recently purchased a 2009 Ninja 250, I brought EBC clutch plate for it as I was concerned when I checked the OEM clutch plate that there was 2 different clutch plate ID on the schematic. Is there a difference between the first and last clutch plates and the middle ones?
first and last plate part number 130880039 (13088A) Middle plate part number 130880038 (13088) 
|
|
|
|
August 6th, 2023, 09:29 AM
|
#2 |
|
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Greetings & Salutations!!
Friction-material blocks on inner-most and outer plates are wider with smaller gaps between them. Post photos of what you have in EBC kit. And of parts you removed. |
|
|
|
|
August 6th, 2023, 04:54 PM
|
#3 |
|
ninjette.org newbie
Name: Leo
Location: Australia
Join Date: Aug 2023 Motorcycle(s): Ninja 250 Posts: 7
|
 the only parts that have been removed is the clutch and a clutch stack(spring and steel plate) from another working ninja bike |
|
|
|
|
August 6th, 2023, 08:02 PM
|
#4 |
|
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Looks like EBC doesn't make different inner and outer plates. Should be OK
|
|
|
|
 |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Clutch plate gap | Unicyclone | 1986 - 2007 Ninja 250R Tech Talk | 9 | June 16th, 2017 10:26 PM |
| 2007 ZX6R Clutch Spring Plate/Clutch Spring Direction? | KnuckleBuster | General Motorcycling Discussion | 2 | August 24th, 2015 03:21 AM |
| Clutch :: Friction Plate & Metal Plate Install and Wear Questions | abhijitz | 2008 - 2012 Ninja 250R Tech Talk | 12 | June 21st, 2013 10:45 AM |
|
|
