After market gauges

Redin99 · July 10th, 2023, 05:54 PM

Hey guys I’m sorry Ik there is a lot about gauges and writing schematics but they are a little all over the place I’m going to post a pic of the specific wires I need can someone help me with that please much appreciated… in the picture you see on the right I just wrote what the corresponding colors of the ones I need to connect to the new gauge like I said thank you in advance

DannoXYZ · July 10th, 2023, 07:14 PM

Did you mean to black out page with phone? Can't make out much in shadows.

Which dash are you trying to install? I've done Trailtech Vapor and Koso RX-2N (also clones).

Factory config uses pulsed-ground for RPM, so dash should support that. Or have inductive pick-up for plug wire

No switches for gear-indicator.

Speed is with mechanical spinner off front-wheel. All aftermarket dashes will require installing magnet on wheel and pick-up coil on fork somewhere.

Here's factory wiring schematic:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Intermittent gauges	JenkinsBradbury	2008 - 2012 Ninja 250R Tech Talk	4	October 18th, 2015 03:17 PM
gauges	akcalhoun	2008 - 2012 Ninja 250R Tech Talk	3	November 14th, 2012 08:11 AM
Gauges...	billmi	Motorcycle-related	0	December 11th, 2010 02:07 PM
Koso gauges	wellcraft	General Motorcycling Discussion	0	February 3rd, 2010 07:52 AM
Fuel Gauges ?	overload	Items Wanted	16	October 26th, 2009 12:15 PM

July 10th, 2023, 07:14 PM	#2
DannoXYZ ninjette.org certified postwhore Name: AKA JacRyann Location: Mesa, AZ Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot. MOTY - 2018, MOTM - Nov '17	Did you mean to black out page with phone? Can't make out much in shadows. Which dash are you trying to install? I've done Trailtech Vapor and Koso RX-2N (also clones). Factory config uses pulsed-ground for RPM, so dash should support that. Or have inductive pick-up for plug wire No switches for gear-indicator. Speed is with mechanical spinner off front-wheel. All aftermarket dashes will require installing magnet on wheel and pick-up coil on fork somewhere. Here's factory wiring schematic: