July 19th, 2013, 05:08 PM | #1 |
ninjette.org member
Name: ivan
Location: Arkansas
Join Date: May 2013 Motorcycle(s): 250 ninja Posts: 13
|
carb problem
After cleaning my carbs the bike revs up fine but is slow to come back down to idle. I tried looking for an air leak by spraying around the various clamps both front and back...but no change. When I spray starter fluid in the air filter intake it comes right back down to idle. Anyone seen this problem before?
|
|
July 19th, 2013, 06:55 PM | #2 |
ninjette.org member
Name: Derek
Location: Boynton Beach
Join Date: Mar 2013 Motorcycle(s): 08 cbr1000rr, 2008 + 2012 ninja 250, 06 zx6r (636!) track only Posts: 150
|
I had an issue where it would hang when the idle adjuster was set too high.
__________________________________________________
http://www.1000rr.net/forums/showthread.php?t=90412 http://www.8thcivic.com/forums/ http://www.facebook.com/profile.php?id=1209877267 |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Carb problem... dies when on the gas | jboyd12 | 2008 - 2012 Ninja 250R Tech Talk | 43 | April 9th, 2014 03:31 PM |
Carb problem? | Carytowncat | 1986 - 2007 Ninja 250R Tech Talk | 15 | March 8th, 2014 11:21 AM |
Carb Float Problem | Trainsk8 | 2008 - 2012 Ninja 250R Tech Talk | 3 | June 4th, 2012 12:31 PM |
Carb Jetting, dont know if there's a real problem? | Trainsk8 | 2008 - 2012 Ninja 250R Tech Talk | 6 | November 11th, 2010 12:50 PM |
carb cleaning problem, not a novice! | revlis240 | 2008 - 2012 Ninja 250R Tech Talk | 15 | May 8th, 2010 08:10 PM |
|
|