November 5th, 2012, 09:42 PM | #1 |
InfoWhore
Name: Melashi
Location: 75081
Join Date: Oct 2012 Motorcycle(s): 2008 Ninja 250 StreetFighter ~~~~ 2005 KTM 450 EXC Posts: 628
|
Ok hopefully someone can answer this one...(speedometer harness wiring diagram!)
Hey guys, so i bought this new gauge and it finally came in, does any one know of a diagram that shows what color wire on the harness goes with what. For example: red- back light, blue- neutral light.... etc (<------examples of course, not real color match)
Get it? if you do please let me know where a diagram i asap! im emailing a guy that will help me if i give him the diagram. The diagram of the speedo is on the pdf, if you have something similar to that for the ninja please post it! thanks
__________________________________________________
Everyone, go buy a dirtbike hurry |
|
November 5th, 2012, 09:42 PM | #2 |
InfoWhore
Name: Melashi
Location: 75081
Join Date: Oct 2012 Motorcycle(s): 2008 Ninja 250 StreetFighter ~~~~ 2005 KTM 450 EXC Posts: 628
|
Here they are sorry
__________________________________________________
Everyone, go buy a dirtbike hurry |
|
November 6th, 2012, 08:57 AM | #3 |
IC2(SW)
Name: Kerry
Location: Pensacola
Join Date: Nov 2008 Motorcycle(s): . Posts: A lot.
|
|
|
November 6th, 2012, 11:47 AM | #4 |
InfoWhore
Name: Melashi
Location: 75081
Join Date: Oct 2012 Motorcycle(s): 2008 Ninja 250 StreetFighter ~~~~ 2005 KTM 450 EXC Posts: 628
|
can any one match the colors with the function that is is used for? im so lost on that diagram.
I need to know: Oil: Blue/red (my Speedo had everything but the oil pressure... So that was empty on my connector) High beam:red/black (in other 3 pin connector with the right turn signal) N:light green Speed: On cable for front wheel water temp:red/yellow fuel:light green/black left turn:green right turn:grey(on different connector with the High beam (3pin) ) back light multiple colors but in my case i didn't need that because mine ran on one led circuit. power -:AKA ground wire black/yellow power+:brown or red/blue (you can use either one) In my case i only needed one power + not many becuase mine was led and didnt need all those back light wires my original speedo had. Just one led light altogether on one wire. rpm:black spare power(power that is always connected to battery): You need to make your own, its very simple. Grab a wire long enough to go from your speedo to your battery and on one side put a connector for the harness and another a connector for the battery. whatever you can find out of these is fine! Edited the things i know for people in the future having a hard time with universal gauges, i know you love me.
__________________________________________________
Everyone, go buy a dirtbike hurry Last futzed with by skilletmo; December 21st, 2012 at 02:13 PM. |
1 out of 1 members found this post helpful. |
November 6th, 2012, 12:26 PM | #5 |
InfoWhore
Name: Melashi
Location: 75081
Join Date: Oct 2012 Motorcycle(s): 2008 Ninja 250 StreetFighter ~~~~ 2005 KTM 450 EXC Posts: 628
|
is power -: black?
power +:brown?
__________________________________________________
Everyone, go buy a dirtbike hurry |
|
November 6th, 2012, 11:58 PM | #6 |
InfoWhore
Name: Melashi
Location: 75081
Join Date: Oct 2012 Motorcycle(s): 2008 Ninja 250 StreetFighter ~~~~ 2005 KTM 450 EXC Posts: 628
|
Ok with a million hours of research and **** i found out where all the wires go, i just have one problemoooo. Does anyone know which wire is the one that stays on the power whenever the bike is turned off, i asked the guy i bought it from and the purple wire on my gauge is labeled "spare power" and i he said that "The purple cable should connect to the spare power, that means when you turn off the motorbike key, it is still connect with power." Does any one know what wire that is, and its not ground! Because i already have a ground and a positive in there which are the black and yellow and brown or red/blue. If any one knows please post it!
thanks
__________________________________________________
Everyone, go buy a dirtbike hurry |
|
November 7th, 2012, 10:36 AM | #7 | |
ninjette.org sage
Name: Byron
Location: Reno, NV
Join Date: Dec 2011 Motorcycle(s): Ninja ex250 1990 Posts: 761
|
Quote:
__________________________________________________
1990 250F. ex300 motor swap, 15/42 gearing, flush side markers, newgen intergrated front fairing, rear integrated turn signals, DB Touring Bubble, zx600 rear shock, Custom DanMoto Exhaust |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
1988+ Ninja EX250 FULL Wiring Diagram here! | jonthechron | 1986 - 2007 Ninja 250R Tech Talk | 20 | May 20th, 2023 08:53 AM |
2008+ Ninja 250r FULL Wiring Diagram here! | jonthechron | 2008 - 2012 Ninja 250R Tech Talk | 40 | August 15th, 2022 09:11 AM |
Wiring diagram and Repair Manual | EMSRacer07 | 2013 - 2017 Ninja 300 Tech Talk | 2 | October 27th, 2013 04:27 PM |
Wiring diagram | bruce71198 | 1986 - 2007 Ninja 250R Tech Talk | 4 | September 20th, 2013 05:22 AM |
300 Wiring Diagram | Foxrider64 | 2013 - 2017 Ninja 300 Tech Talk | 2 | June 3rd, 2013 12:24 PM |
|
|