April 14th, 2012, 09:10 PM | #1 |
ninjette.org member
Name: Kyle
Location: shawnee, ks
Join Date: Mar 2012 Motorcycle(s): 2011 Ninja 250 Posts: 27
|
Need some more opinions
So, I come to this forum daily now. I love reading what everyone is doing.
I'm still working on posting more pics of my bike, right now I think I've only got one on my profile. I'll get on that, cause I've done a few minor things. Now, I'm looking at a few other farkles that are cheap and quick. Just because I like doing things to the bike and I could easily go broke doing something big every week. for now, it needs to be small cheap things. My 2011 is black and I really like Carbon accessories, my tank pad is the only carbon-look item I have right now tho. I see cars, and bikes too, that take the carbon way too far and I don't want to do that. However, I've got a Two Brothers Black Series Carbon slip-on on the way. and I'm starting to think I might grab a gas cap protector as well since they are dirt cheap on ebay. But today, I found these. http://www.ebay.com/itm/Carbon-Mirro...dcb0d9&vxp=mtr I'm sure no one has experience with this, or this seller so I'm not asking about quality(unless you do, then I am!) but what do you guys think of hints of carbon here and there? overkill with these? anyone have any other subtle bits of carbon I could consider? |
|
April 14th, 2012, 09:16 PM | #2 |
Newb..... on a steeek! :D
Name: Mike
Location: Windermere, FL
Join Date: Feb 2009 Motorcycle(s): 2012 Harley Davidson XL883L Sportster Superlow Posts: A lot.
|
Maybe it's just me, but I have never liked (and most likely never will) fake carbon farkles.
__________________________________________________
|
|
April 14th, 2012, 09:19 PM | #3 |
ninjette.org certified postwhore
Name: Sean
Location: Middle TN
Join Date: Apr 2012 Motorcycle(s): 2010 Ninja 250r (sold) / '03 CBR 600RR Posts: A lot.
|
I saw a carbon front hugger & carbon side plastic piece (replaces the black plastic triangle-shaped pieces on the sides)
Kind of pricey, however, definitely not as expensive as that slip-on you just bought :P http://www.tygausa.com/en/23-ninja-250r-2008-2010 |
|
April 14th, 2012, 09:35 PM | #4 | |
ninjette.org member
Name: Kyle
Location: shawnee, ks
Join Date: Mar 2012 Motorcycle(s): 2011 Ninja 250 Posts: 27
|
Quote:
Well, spending on the slip-on is not quite what you think. The dealer I bought the bike from owed me a favor, and I'm getting it at "cost" he should have it any day and he will tell me what I owe. As far as I know, it's considerably less than msrp. otherwise, I would not have jumped into that yet. I wish I had seen that front fender a week ago, I just put on a CBR hugger on the rear tire and I almost would have scraped that idea for matching front and rear carbons. |
|
|
April 14th, 2012, 09:36 PM | #5 |
ninjette.org member
Name: Kyle
Location: shawnee, ks
Join Date: Mar 2012 Motorcycle(s): 2011 Ninja 250 Posts: 27
|
|
|
April 14th, 2012, 10:00 PM | #6 |
ninjette.org guru
Name: Laurence
Location: Bangbuathong Thailand
Join Date: Jan 2012 Motorcycle(s): Green 2012 Ninja 250SE and a Yamaha fino scooter (my wife's really) Posts: 355
|
I like them and with the Turn signals added viability which can never be a bad thing,
as for being too much no if its only the things you already have, for other non carbon but good quality Farkles check this http://www.ninjette.org/forums/showthread.php?t=96572
__________________________________________________
Be safe ride smart .....a dumb rider is a dead rider |
|
April 14th, 2012, 10:01 PM | #7 |
ninjette.org member
Name: Kyle
Location: shawnee, ks
Join Date: Mar 2012 Motorcycle(s): 2011 Ninja 250 Posts: 27
|
ok, this changes things.
http://www.ebay.com/itm/12-X-50-3D-B...fe00f3&vxp=mtr I know someone has to have used this at some point. This would mean, courtesy of sean's ideas, carbon hugger on the rear, fender on the front. Possibly the mirrors, the tank pad, and the gas cap protector(if I can find the correct one) How is that for overkill? |
|
April 14th, 2012, 10:04 PM | #8 | |
ninjette.org member
Name: Kyle
Location: shawnee, ks
Join Date: Mar 2012 Motorcycle(s): 2011 Ninja 250 Posts: 27
|
Quote:
As I said I am on here pretty much daily the last few weeks and I actually ran into your post there recently. I love the look of all the red items( red on black is my favorite match up) but right now I'm on a cheap as possible basis. I have bookmarked that thread and I will keep it in mind for sure. |
|
|
April 14th, 2012, 10:07 PM | #9 | |
ninjette.org guru
Name: Laurence
Location: Bangbuathong Thailand
Join Date: Jan 2012 Motorcycle(s): Green 2012 Ninja 250SE and a Yamaha fino scooter (my wife's really) Posts: 355
|
Quote:
Problem is if you have a roll of the stuff you might think mmmmmmmmm what can i do next I know just a little on the fairings next you know you will have an all carbon bike lol
__________________________________________________
Be safe ride smart .....a dumb rider is a dead rider |
|
|
April 14th, 2012, 10:13 PM | #10 |
ninjette.org member
Name: Kyle
Location: shawnee, ks
Join Date: Mar 2012 Motorcycle(s): 2011 Ninja 250 Posts: 27
|
haha, good point. but for $10 maybe I should... and just replace all the plastics when I decide it really is as stupid as everyone thinks it will be. Maybe by that time I will give this bike to my wife and she will prob want a new color anyway.
|
|
April 14th, 2012, 10:26 PM | #11 | |
ninjette.org guru
Name: Laurence
Location: Bangbuathong Thailand
Join Date: Jan 2012 Motorcycle(s): Green 2012 Ninja 250SE and a Yamaha fino scooter (my wife's really) Posts: 355
|
Quote:
Pm sent
__________________________________________________
Be safe ride smart .....a dumb rider is a dead rider |
|
|
April 14th, 2012, 11:15 PM | #12 |
Newb..... on a steeek! :D
Name: Mike
Location: Windermere, FL
Join Date: Feb 2009 Motorcycle(s): 2012 Harley Davidson XL883L Sportster Superlow Posts: A lot.
|
Because it's fake. I like the look of real carbon fiber. However, fake carbon fiber to me is just annoying and ugly. But if you like them, then don't let me stop you.
__________________________________________________
|
|
April 14th, 2012, 11:44 PM | #13 | |
ninjette.org member
Name: Kyle
Location: shawnee, ks
Join Date: Mar 2012 Motorcycle(s): 2011 Ninja 250 Posts: 27
|
Quote:
hey no problem, just out for opinions. so, yours is fine no matter what. This is my first bike and I know what I like but I don't know what everyone else likes...not that that would sway me, but I'm still curious to see if ppl think I would be ruining my bike/resell, if I ever thought about that. do you know of any legit carbon parts that wouldn't cost a fourtune and would add just a little bit of carbon look? I'm not wanting to do a full fairing set or anything like that, I just like little touches here and there. |
|
|
April 15th, 2012, 11:31 AM | #14 |
ninjette.org member
Name: Kristoffer
Location: San Jose
Join Date: Apr 2012 Motorcycle(s): 2008 Ninja 250 (sold) Posts: 110
|
If you like carbon that much why not go all out and buy the new Arai Corsair V Carbon? It sells for the low price of $4000!
Or you can try winning it. https://www.revzilla.com/arai-helmets-carbon-giveaway For your bike, I don't think those mirrors look too bad and you can get rid of the dinky side markers. Previous owner of my bike put these on: http://tinyurl.com/6syaamd I've got compliments but the only issue I had with these were you needed to drill holes in the fairing to install them. |
|
April 15th, 2012, 12:32 PM | #15 |
ninjette.org certified postwhore
Name: Sean
Location: Middle TN
Join Date: Apr 2012 Motorcycle(s): 2010 Ninja 250r (sold) / '03 CBR 600RR Posts: A lot.
|
I am on the fence about carbon fiber, however, I do think that if there was any specific color to complement carbon fiber, then it would be black. And considering your bike is blacked out, I think the mods will look good.
I think those turn signals will look good, and I even think the carbon fiber tank fill pads from tyga would look good. |
|
April 15th, 2012, 01:22 PM | #16 | |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
Quote:
Also, many huggers have the option for carbon fiber. The DanMoto slip-on also comes in CF. here's massacremasses (Justin)'s bike as an example of what the DanMoto can looks like in CF |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Need your opinions. . . .. | Terere | General Motorcycling Discussion | 39 | November 5th, 2012 10:57 AM |
Need Help + Opinions | razorgamez | General Motorcycling Discussion | 15 | March 24th, 2012 04:15 PM |
opinions wanted | Cringer | General Motorcycling Discussion | 19 | March 19th, 2012 08:11 PM |
I need some opinions. | Heed | General Motorcycling Discussion | 12 | September 13th, 2011 05:41 PM |
opinions please | sombo | General Motorcycling Discussion | 9 | November 13th, 2009 09:35 AM |
|
|