March 14th, 2012, 05:42 PM | #1 |
ninjette.org certified postwhore
Name: Bobbert
Location: Russell Springs, KY
Join Date: Jul 2011 Motorcycle(s): 2006 Ninja 250R Posts: A lot.
|
Tire lost bead?
OK, have bad tire but was going to put some air in it and see if it would hold till I got her up the road a bit to my shop. The tire has a plug in it but lost bead and won't take air.
Solutions or should I just trailer it? |
|
March 14th, 2012, 07:49 PM | #2 |
Daily Ninjette rider
Name: Hernan
Location: Florida
Join Date: Mar 2011 Motorcycle(s): 2007 Ninja 250 Posts: A lot.
MOTY - 2016, MOTM - Dec '12, Jan '14, Jan '15, May '16
|
Take the valve out of the stem and blow it with any decent pump or compressor (don't go over the max pressure stamped on the sidewall of the tire).
Some lubrication and putting pressure on the perimeter of the tire will help. After the bead is set, insert the valve and pump as normal.
__________________________________________________
Motofool .................................Never ride faster than your guardian angel can fly "Mankind is composed of two sorts of men — those who love and create, and those who hate and destroy. Love is the bond between men, the way to teach and the center of the world." - José Martí |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
how-to: fix tire bead | alex.s | General Motorcycling Discussion | 7 | December 2nd, 2013 11:46 AM |
Thread Tools | |
|
|