February 12th, 2018, 07:22 PM | #1 |
Motorbike Obsessed
Name: Me
Location: SoCal
Join Date: May 2015 Motorcycle(s): 2004 Kawasaki EX250, 2004 Yamaha FZ1, 2006 Honda CRF 450 Flat Track Race Bike Posts: 133
|
Track Bike Take Off Parts
I converted my 2004 Ninja 250 Track Bike back to street duty to have a better chance of selling her. I took off a bunch of track related parts that others may want for a similar track bike project:
Cobra F1 Exhaust (make reasonable offer, shipping is ~$35 for these) - Pregen only, has new gaskets. You need to use your stock mounting clamps. Pregen Brake Pads (make offer) - EBC HH Sintered new in the pack. SSR Screw On Gas Cap (make offer) - Has a few dings, but worked well at the track. 13 Tooth Counter Shaft Sprocket (make offer) - If you have a small tight track or run your bike on kart tracks, this will help you pull off the corners with a bit more grunt. Fits newgen as well I believe. If you want more than one item, I may make a deal. You can check out my time with these parts at my blog at:http://http://mymotorbikeobsessions.blogspot.com All parts will be cleaned and ready to install. Sorry for the inverted pictures, but the forum software is being stupid. Hit me up with a PM if interested.
__________________________________________________
My race Ninja build and more motorcycle content. My Motorbike Obsessions Last futzed with by AchyGrappler; February 22nd, 2018 at 03:51 PM. |
|
February 12th, 2018, 07:57 PM | #2 |
ninjette.org certified postwhore
Name: Roger
Location: Mitchell, South Dakota
Join Date: Apr 2014 Motorcycle(s): 1978 Z1R, 1999 EX250 Posts: A lot.
MOTY - 2018, MOTM - Oct '16
|
are those exhaust cans slip-ons or a full header?
__________________________________________________
|
|
February 12th, 2018, 08:09 PM | #3 |
in your machine
Name: Scott
Location: Summer Shade, Ky.
Join Date: Oct 2014 Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN" Posts: A lot.
Blog Entries: 25
MOTM - Jun '17, May '16, Mar '15
|
Pm sent
__________________________________________________
violente et ignorantia ZX-2R BLOG Twitter and Instagram = Ghostt_Scott I'm not here to change your mind, just to inform. |
|
February 12th, 2018, 08:32 PM | #4 |
Motorbike Obsessed
Name: Me
Location: SoCal
Join Date: May 2015 Motorcycle(s): 2004 Kawasaki EX250, 2004 Yamaha FZ1, 2006 Honda CRF 450 Flat Track Race Bike Posts: 133
|
Slip on. They attach where the stock mufflers attach underneath the engine.
__________________________________________________
My race Ninja build and more motorcycle content. My Motorbike Obsessions |
|
February 12th, 2018, 08:32 PM | #5 |
Motorbike Obsessed
Name: Me
Location: SoCal
Join Date: May 2015 Motorcycle(s): 2004 Kawasaki EX250, 2004 Yamaha FZ1, 2006 Honda CRF 450 Flat Track Race Bike Posts: 133
|
__________________________________________________
My race Ninja build and more motorcycle content. My Motorbike Obsessions |
|
February 12th, 2018, 08:34 PM | #6 |
ninjette.org certified postwhore
Name: Roger
Location: Mitchell, South Dakota
Join Date: Apr 2014 Motorcycle(s): 1978 Z1R, 1999 EX250 Posts: A lot.
MOTY - 2018, MOTM - Oct '16
|
Ok, thanks for the quick response.
__________________________________________________
|
|
February 12th, 2018, 08:37 PM | #7 |
Motorbike Obsessed
Name: Me
Location: SoCal
Join Date: May 2015 Motorcycle(s): 2004 Kawasaki EX250, 2004 Yamaha FZ1, 2006 Honda CRF 450 Flat Track Race Bike Posts: 133
|
I found some more parts in the bin when I was packaging things up for sale:
Pregen Brake Pads $25 - EBC HH Sintered new in the pack. SSR Screw On Gas Cap $15 - Has a few dings, but worked well at the track. 13 Tooth Counter Shaft Sprocket $10 - If you have a small tight track or run your bike on kart tracks, this will help you pull off the corners with a bit more grunt. Fits newgen as well I believe.
__________________________________________________
My race Ninja build and more motorcycle content. My Motorbike Obsessions |
|
February 13th, 2018, 08:55 AM | #8 |
ninjette.org sage
Name: Timm
Location: West Seneca, NY
Join Date: Oct 2015 Motorcycle(s): 2006 1050 Speed Triple, 2010 250 Ninja racebike, YZF320RR? Racebike Posts: 556
MOTM - Nov '15
|
PM sent.
|
|
February 13th, 2018, 01:21 PM | #9 |
Motorbike Obsessed
Name: Me
Location: SoCal
Join Date: May 2015 Motorcycle(s): 2004 Kawasaki EX250, 2004 Yamaha FZ1, 2006 Honda CRF 450 Flat Track Race Bike Posts: 133
|
Brake lever guard, shark fin and timer are sold.
Exhaust and gas cap are pending. Clip Ons, pegs, rear set brackets, 13T sprocket and brake pads still up for grabs. Entertaining offers!
__________________________________________________
My race Ninja build and more motorcycle content. My Motorbike Obsessions Last futzed with by AchyGrappler; February 14th, 2018 at 08:25 AM. |
|
February 18th, 2018, 02:51 PM | #10 |
Motorbike Obsessed
Name: Me
Location: SoCal
Join Date: May 2015 Motorcycle(s): 2004 Kawasaki EX250, 2004 Yamaha FZ1, 2006 Honda CRF 450 Flat Track Race Bike Posts: 133
|
Going out of the Ninja business sale!
The final hours of my big blowout sale are here. I'm trying to raise money to buy a steel shoe for the start of the flat track racing season so everything has got to go! Here are my package deals: The "Woah and Go" pack - Brand new, in the wrapper EBC FA129HH Sintered Front Brake pads AND a 13 tooth countershaft sprocket. Get up to speed quickly with the sprocket and haul your speed down with some new brake pads. $30 shipped to the continental US. Fits Pregen Ninja 250s. The "Down Low" pack - The best mainland Chinese ergonomic mods you can buy for your Pregen Ninjette combined with American know how and fabrication to get your feet up and back and get your upper body crouched low behind the windscreen. 36mm clip-on handle bars with spare bars, New chrome race pegs and home-built, organic, free range rear set relocation brackets will have your body positioned on your little Ninja just like Johnny Rea. $25 shipped to the continental US. Hit me up with a private message. I take PayPal. Get them before they are gone!!
__________________________________________________
My race Ninja build and more motorcycle content. My Motorbike Obsessions Last futzed with by AchyGrappler; February 20th, 2018 at 07:56 AM. |
|
February 19th, 2018, 02:36 PM | #11 |
ninjette.org sage
Name: Timm
Location: West Seneca, NY
Join Date: Oct 2015 Motorcycle(s): 2006 1050 Speed Triple, 2010 250 Ninja racebike, YZF320RR? Racebike Posts: 556
MOTM - Nov '15
|
Got the parts from Achy today. Everything exactly as described.
Now go get that flat track shoe and bust out some laps! Thanks, Timm |
|
February 19th, 2018, 02:57 PM | #12 |
Motorbike Obsessed
Name: Me
Location: SoCal
Join Date: May 2015 Motorcycle(s): 2004 Kawasaki EX250, 2004 Yamaha FZ1, 2006 Honda CRF 450 Flat Track Race Bike Posts: 133
|
Thanks Timm, enjoy the parts and stickers. Hot shoe ordered today, just need to sell the remaining parts to pay for it!!
__________________________________________________
My race Ninja build and more motorcycle content. My Motorbike Obsessions |
|
February 21st, 2018, 04:53 PM | #13 |
ninjette.org member
Name: Cody
Location: Sacramento
Join Date: Jan 2018 Motorcycle(s): 2006 ex250 Posts: 26
|
So its pegs, brackets, clip ons, and extra bars for $25shipped. Im down if you still have them.
|
|
February 21st, 2018, 07:05 PM | #14 |
Motorbike Obsessed
Name: Me
Location: SoCal
Join Date: May 2015 Motorcycle(s): 2004 Kawasaki EX250, 2004 Yamaha FZ1, 2006 Honda CRF 450 Flat Track Race Bike Posts: 133
|
PM'd
__________________________________________________
My race Ninja build and more motorcycle content. My Motorbike Obsessions |
|
February 22nd, 2018, 03:54 PM | #15 |
Motorbike Obsessed
Name: Me
Location: SoCal
Join Date: May 2015 Motorcycle(s): 2004 Kawasaki EX250, 2004 Yamaha FZ1, 2006 Honda CRF 450 Flat Track Race Bike Posts: 133
|
I have updated the original post to reflect the items that are remaining based on what has been sold. The only remaining items are:
Cobra F1 Exhaust (make reasonable offer, shipping is ~$35 for these) - Pregen only, has new gaskets. You need to use your stock mounting clamps. Pregen Brake Pads (make offer) - EBC HH Sintered new in the pack. SSR Screw On Gas Cap (make offer) - Has a few dings, but worked well at the track. 13 Tooth Counter Shaft Sprocket (make offer) - If you have a small tight track or run your bike on kart tracks, this will help you pull off the corners with a bit more grunt. Fits newgen as well I believe. If you want more than one item, I may make a deal. You can check out my time with these parts at my blog at:http://http://mymotorbikeobsessions.blogspot.com All parts will be cleaned and ready to install. Sorry for the inverted pictures, but the forum software is being stupid. Hit me up with a PM if interested.
__________________________________________________
My race Ninja build and more motorcycle content. My Motorbike Obsessions |
|
February 25th, 2018, 08:46 PM | #16 |
Motorbike Obsessed
Name: Me
Location: SoCal
Join Date: May 2015 Motorcycle(s): 2004 Kawasaki EX250, 2004 Yamaha FZ1, 2006 Honda CRF 450 Flat Track Race Bike Posts: 133
|
Parts sold with bike.
__________________________________________________
My race Ninja build and more motorcycle content. My Motorbike Obsessions |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2012 Ninja 250R track / race parts | iZapp | Motorcycle-related | 6 | May 31st, 2014 05:11 PM |
[roadracingworld.com] - Bike Night, Bikini Contest, Stunt Show, Track Laps And Track | Ninjette Newsbot | Motorcycling News | 0 | September 6th, 2013 01:20 PM |
REAR SEAT LATCH!- Track bike leftover parts? | Klondike1020 | Items Wanted | 2 | August 9th, 2013 03:15 PM |
98 parts bike | bhalv | Motorcycle-related | 1 | March 31st, 2011 09:51 AM |
[topix.net] - The Racing Recipe: Two Parts Bike & Rider, Five Parts Perseverance | Ninjette Newsbot | Motorcycling News | 0 | October 7th, 2010 06:00 PM |
|
|