June 10th, 2024, 06:19 PM | #1 |
ninjette.org member
Name: Eric
Location: Texas
Join Date: Dec 2023 Motorcycle(s): 2007 Ninja 250, 80' KZ650 (RIP) Posts: 15
|
Gearing advice
1st of all... Gearing commander is the coolest browser tool I have ever discovered. Moving on.
I just wanted to get opinions on gearing for my drag project. My goals are to get the bike and me down to 525ish and 30hp after I get into the engine. This should will get me around a 90mph trap speed. My possibly incorrect thinking is that the engine makes peak power at 12,500rpm and I would like to be crossing the 1/4 mile at 13k rpm. From the dyno graph I found it seems like it holds decent power to 13k then falls off the cliff. A 47t rear sprocket would be hitting 90mph with stock sized tire at 13k in 5th. I don't mind 9k rpm @70 as its only 5 miles into town and just a weekend toy. Thanks in advance for your wisdom.
__________________________________________________
80' KZ650 - long gone 01' Golf 1.8t w/big hair dryer Last futzed with by Omnitech; June 10th, 2024 at 06:21 PM. Reason: Forgot attachments. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Gearing | ROB654 | 2008 - 2012 Ninja 250R Tech Talk | 1 | February 26th, 2017 07:22 PM |
need gearing help!! | caliking | 2008 - 2012 Ninja 250R Tech Talk | 6 | April 7th, 2014 12:04 PM |
Gearing | jaybo | 2013 - 2017 Ninja 300 Tech Talk | 12 | January 18th, 2014 08:12 AM |
AU model has different gearing? Why? | CZroe | 2008 - 2012 Ninja 250R Tech Talk | 25 | March 20th, 2013 02:46 AM |
Gearing setup | msebastian | 2008 - 2012 Ninja 250R Tech Talk | 9 | February 23rd, 2013 11:23 PM |
|
|