July 1st, 2011, 08:56 PM | #1 |
ninjette.org member
Name: Kai
Location: chicago
Join Date: Mar 2011 Motorcycle(s): 2010 Kawasaki Ninja 250R Posts: 98
|
newgen aftermarket parts F.S
Going to trade in my bike, so all the aftermarket part are coming off. some parts are used and some are new. all used parts have less then 100miles beside the fender eliminator and the dyno jet kit that i got it used from a member on this forum. Pm me if you have any question.
cycle pirates quick/race throttle-brand new-$65 shipped ebay clutch and brake lever-non folding-used-Sold plmfg full exhaust system-used-damged muffler-$100shipped emission block off plate-brand new-Sold Frame Sliders Protector No cut-used-Sold jardine no cut fender eliminator with custom led plate light-used-$50shipped dyno jet stage 2 kit-not a complete kit- no 98jet,needle or hex bolts-$30shipped The No Cut Brake Lamp Modulator-used-Sold lowering links-used-damaged-Sold Uploaded with ImageShack.us rear seat cowl-used-SOLD Bridgestone Battlax BT-016 front+rear tires-brand new-SOLD Last futzed with by EvoXNinja; August 27th, 2011 at 07:52 PM. |
|
July 1st, 2011, 09:06 PM | #2 |
There's a limit to s2pdty
Name: A.D.
Location: NoVa the burg
Join Date: Apr 2011 Motorcycle(s): 250r ninja (sold) Posts: A lot.
|
that bike still new o.o well good luck with the upgrade, what bike are you looking to get?
|
|
July 1st, 2011, 09:11 PM | #3 |
ninjette.org member
Name: Kai
Location: chicago
Join Date: Mar 2011 Motorcycle(s): 2010 Kawasaki Ninja 250R Posts: 98
|
most likely the zx-6r
|
|
July 7th, 2011, 05:56 PM | #4 |
ninjette.org member
Name: Kai
Location: chicago
Join Date: Mar 2011 Motorcycle(s): 2010 Kawasaki Ninja 250R Posts: 98
|
seat cowl sold
|
|
July 16th, 2011, 12:38 AM | #5 |
ninjette.org member
Name: Kai
Location: chicago
Join Date: Mar 2011 Motorcycle(s): 2010 Kawasaki Ninja 250R Posts: 98
|
bump
|
|
July 21st, 2011, 04:46 PM | #6 |
ninjette.org member
Name: Kai
Location: chicago
Join Date: Mar 2011 Motorcycle(s): 2010 Kawasaki Ninja 250R Posts: 98
|
tires sold!!
|
|
July 22nd, 2011, 10:15 PM | #7 |
ninjette.org member
Name: Kai
Location: chicago
Join Date: Mar 2011 Motorcycle(s): 2010 Kawasaki Ninja 250R Posts: 98
|
Update: more parts added
|
|
July 22nd, 2011, 10:21 PM | #8 |
Always.
Name: Alex
Location: Calgary, AB
Join Date: Mar 2011 Motorcycle(s): '08 Ninja 250, '05 GSX-R600 Posts: A lot.
|
Exactly what I wanted...blue '06 636. Until I realized getting the gxxr will be better financially because every 636 was much too much for my bank atm.
Gxxr had minor damage and girl bought a cbr1000 and needed quick cash; it was running great so I took it =] In the future I would like a zx6r ! great bikes
__________________________________________________
blink-182 |
|
July 22nd, 2011, 10:27 PM | #9 |
ninjette.org member
Name: Kai
Location: chicago
Join Date: Mar 2011 Motorcycle(s): 2010 Kawasaki Ninja 250R Posts: 98
|
i'm looking at a 06 black 636 with around 8.5k miles on it...if everything works out...i'll be taking it home by midweek
|
|
July 23rd, 2011, 09:57 AM | #10 |
ninjette.org sage
Name: J.G.
Location: Austin
Join Date: Oct 2009 Motorcycle(s): '09 zx6r Green/Black, (ex-)Diablo Black '09 Ninja 250r Posts: 959
|
I'm looking at a '06 as well - the price is $4500 with 5k - how about the one your looking at?
|
|
July 23rd, 2011, 03:36 PM | #11 |
ex-ninjette.org guru :o
Name: Trevor
Location: Barrie, Ontario
Join Date: Jun 2010 Motorcycle(s): 2003 SV1000 S Posts: 475
|
what colour are the levers?
edit: n/m looked at the pics. |
|
July 23rd, 2011, 03:49 PM | #12 |
ninjette.org member
Name: Kai
Location: chicago
Join Date: Mar 2011 Motorcycle(s): 2010 Kawasaki Ninja 250R Posts: 98
|
when they first listed on there site...they want $7499 then a couple we ago, it went down to $7199....and this week it went down agian to $5999...i'll go in this week and see if i can talk down further.
|
|
July 24th, 2011, 02:51 PM | #13 |
ninjette.org member
Name: Kai
Location: chicago
Join Date: Mar 2011 Motorcycle(s): 2010 Kawasaki Ninja 250R Posts: 98
|
lowering links sold
|
|
July 27th, 2011, 06:45 PM | #14 |
ninjette.org member
Name: Kai
Location: chicago
Join Date: Mar 2011 Motorcycle(s): 2010 Kawasaki Ninja 250R Posts: 98
|
emission block off plate sold
|
|
July 29th, 2011, 07:50 PM | #15 |
ninjette.org member
Name: Kai
Location: chicago
Join Date: Mar 2011 Motorcycle(s): 2010 Kawasaki Ninja 250R Posts: 98
|
frame slider sold...The No Cut Brake Lamp Modulator added
|
|
July 30th, 2011, 06:09 AM | #16 |
ninjette.org member
Name: Matt
Location: SoCal
Join Date: Jul 2011 Motorcycle(s): CB550, CB750, Black '08 250r Posts: 42
|
I'll take the modulator if you still have it.
|
|
July 31st, 2011, 12:31 PM | #17 |
ninjette.org member
Name: Kai
Location: chicago
Join Date: Mar 2011 Motorcycle(s): 2010 Kawasaki Ninja 250R Posts: 98
|
The No Cut Brake Lamp Modulator Sold
|
|
August 6th, 2011, 11:06 AM | #18 |
ninjette.org member
Name: Matt
Location: SoCal
Join Date: Jul 2011 Motorcycle(s): CB550, CB750, Black '08 250r Posts: 42
|
Received the modulator. Works great. Is the flash adjustable?
|
|
August 6th, 2011, 04:42 PM | #19 |
ninjette.org member
Name: Kai
Location: chicago
Join Date: Mar 2011 Motorcycle(s): 2010 Kawasaki Ninja 250R Posts: 98
|
if you cut the green loop wire, it will double the flash time. they have instruction on there website.
http://nocutmodulators.com/ |
|
August 9th, 2011, 09:25 PM | #20 |
ninjette.org member
Name: Jon
Location: NYC
Join Date: Jul 2011 Motorcycle(s): 250 Posts: 129
|
Got the frame sliders, perfect condition. Got them installed on the bike and looks good. Great seller. Also I wish you had added the modulator before we settled the sale, would have snatch it.
Anyways deff recommend seller, to thank you here is a bump. |
|
August 10th, 2011, 07:47 AM | #21 |
You are sleeping
Name: Casey
Location: LMFAO!!!
Join Date: Nov 2009 Motorcycle(s): 2 Posts: A lot.
|
Might take the exhaust off your hands if I can gather enough money.
Let me know if you end up selling it. I'll let you know if I can get the cash!
__________________________________________________
<Yeah, it's a 250. LMFAO! Weaksauce |
|
August 12th, 2011, 01:23 AM | #22 |
ninjette.org member
Name: Kai
Location: chicago
Join Date: Mar 2011 Motorcycle(s): 2010 Kawasaki Ninja 250R Posts: 98
|
|
|
August 12th, 2011, 01:26 AM | #23 |
ninjette.org member
Name: Kai
Location: chicago
Join Date: Mar 2011 Motorcycle(s): 2010 Kawasaki Ninja 250R Posts: 98
|
glad you like it...i was going to post the modulator the same time i post the other parts but waited to see if it will work on my zx-6r but it didnt, that why i posted later...sorry
|
|
August 12th, 2011, 02:10 AM | #24 |
Gear crash test dummy
Name: Max
Location: South Bay (So. Cal)
Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.
|
So....did you get the 636??!?
|
|
August 12th, 2011, 04:52 PM | #25 |
ninjette.org member
Name: Kai
Location: chicago
Join Date: Mar 2011 Motorcycle(s): 2010 Kawasaki Ninja 250R Posts: 98
|
|
|
August 12th, 2011, 07:30 PM | #26 |
Gear crash test dummy
Name: Max
Location: South Bay (So. Cal)
Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.
|
Nice!
|
|
August 12th, 2011, 07:57 PM | #27 |
ninjette.org member
Name: nick
Location: Twin Cities, MN
Join Date: Jun 2010 Motorcycle(s): ninja 250 Posts: 168
|
What the extent of the damage on the exhaust?
|
|
August 16th, 2011, 10:26 PM | #28 |
ninjette.org member
Name: Kai
Location: chicago
Join Date: Mar 2011 Motorcycle(s): 2010 Kawasaki Ninja 250R Posts: 98
|
look at the pictures on first post to see the damege...couple dent on the muffler
|
|
August 27th, 2011, 06:40 AM | #29 |
Climb to Glory!
Name: Charlie
Location: Las Vegas
Join Date: Mar 2011 Motorcycle(s): 2011 Kawasaki Ninja 250R White (sold) Posts: 234
|
still selling the fender eliminator?
__________________________________________________
I wanted to become Kamen Rider as a kid. |
|
August 27th, 2011, 01:54 PM | #30 |
ninjette.org member
Name: Ninja
Location: CA
Join Date: Aug 2011 Motorcycle(s): Ninja! Posts: 77
|
still have those levers? If so, can I get a picture of them both? Presuming no damage?
|
|
August 27th, 2011, 02:49 PM | #31 |
ninjette.org member
Name: Omar
Location: Dallas Texas
Join Date: Aug 2011 Motorcycle(s): 2011 ninja 250 special edition Posts: 54
|
Nice choice. I want a 09' zx-6 green or black that way I can use the same gear.
|
|
August 27th, 2011, 04:37 PM | #32 |
ninjette.org member
Name: Kai
Location: chicago
Join Date: Mar 2011 Motorcycle(s): 2010 Kawasaki Ninja 250R Posts: 98
|
i still have the levers and fender eliminator
|
|
August 27th, 2011, 04:53 PM | #33 |
Accesories Guru
Name: Dave
Location: Centreville, VA
Join Date: May 2011 Motorcycle(s): '99 EX250(Cafe/fighter project) Posts: 537
|
PMing you about the levers.
|
|
August 27th, 2011, 04:59 PM | #34 |
ninjette.org member
Name: Ninja
Location: CA
Join Date: Aug 2011 Motorcycle(s): Ninja! Posts: 77
|
|
|
August 27th, 2011, 07:07 PM | #35 |
ninjette.org member
Name: Kai
Location: chicago
Join Date: Mar 2011 Motorcycle(s): 2010 Kawasaki Ninja 250R Posts: 98
|
here more pictures as requested... i have a few member pm me for this and whoever paypal me first get it.
|
|
August 27th, 2011, 07:33 PM | #36 |
Accesories Guru
Name: Dave
Location: Centreville, VA
Join Date: May 2011 Motorcycle(s): '99 EX250(Cafe/fighter project) Posts: 537
|
They look fantastic, PM'd you back.
|
|
August 27th, 2011, 07:34 PM | #37 |
ninjette.org member
Name: Ninja
Location: CA
Join Date: Aug 2011 Motorcycle(s): Ninja! Posts: 77
|
|
|
August 27th, 2011, 07:51 PM | #38 |
ninjette.org member
Name: Kai
Location: chicago
Join Date: Mar 2011 Motorcycle(s): 2010 Kawasaki Ninja 250R Posts: 98
|
levers sold!!!
|
|
August 27th, 2011, 09:14 PM | #39 |
ninjette.org certified postwhore
Name: Eric
Location: Murfreesboro, TN
Join Date: Jun 2011 Motorcycle(s): '13 300 Posts: A lot.
|
Still got the fender elim? If so how much and what else ya got left?
|
|
August 27th, 2011, 11:57 PM | #40 | |
ninjette.org member
Name: Kai
Location: chicago
Join Date: Mar 2011 Motorcycle(s): 2010 Kawasaki Ninja 250R Posts: 98
|
Quote:
cycle pirates quick/race throttle-brand new-$65 shipped plmfg full exhaust system-used-damged muffler-SOLD jardine no cut fender eliminator with custom led plate light-used-$50shipped dyno jet stage 2 kit-not a complete kit- no 98jet,needle or hex bolts-$30shipped Last futzed with by EvoXNinja; October 2nd, 2011 at 03:48 PM. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS: 08-12 newgen parts | C L | Motorcycle-related | 12 | April 23rd, 2014 05:29 AM |
Tons of Newgen Parts! (Stock and Aftermarket) | Zyconic17 | Motorcycle-related | 12 | November 7th, 2011 02:13 PM |
F.S. Newgen oem parts. | nickadolph | Motorcycle-related | 8 | August 19th, 2011 04:20 PM |
Newgen Stock & Aftermarket Parts For Sale | EvoXNinja | Motorcycle-related | 5 | June 8th, 2011 07:01 PM |
Newgen Aftermarket Parts For Sale | KGar | Motorcycle-related | 32 | June 8th, 2011 02:34 PM |
|
|