July 12th, 2011, 12:02 AM | #1 |
ninjette.org member
Name: Cole
Location: Corpus Christi
Join Date: Oct 2010 Motorcycle(s): 2009 Ninja 250r Posts: 20
|
Woodcraft clipon height question
I am looking into getting the woodcraft clipons, but i am unsure of what height size to get. I have read a DIY on how to install them by kkim, but i had thought they were to be installed above the tripple. In the DIY kkim Installed his underneath and used a 2 1/2" rise.
Would a lower rise clamp create clearance issues? I was hoping to get the lowest rise offered and install them on top Of the tripple. Thanks guys, Cole
__________________________________________________
'09 250R woodcraft clip-ons 2 bros slip-on |
|
July 12th, 2011, 12:30 AM | #2 |
ninjette.org sage
Name: David
Location: Loves Park, IL
Join Date: Feb 2011 Motorcycle(s): Time will tell Posts: 969
|
The Clip-On's that Woodcraft sells specifically for the New Gen 250R are designed to go under the triple tree, but actually end up sitting a little lower than a no-rise clip on mounted above the triple tree.
Having been said, if you purchase a no rise clipon with the correct ID for the fork tubes and mount them above the triple, you should be fine, but there are no guarantees! However, it may be some ease to hear that some clip-ons designed for the 250R (Namely the KTC and a few others) are specifically designed to be mounted above the triple tree. |
|
July 12th, 2011, 01:45 AM | #3 |
ninjette.org member
Name: Cole
Location: Corpus Christi
Join Date: Oct 2010 Motorcycle(s): 2009 Ninja 250r Posts: 20
|
Gotcha,
Thanks leed, I think ill play it safe and get the same setup as kkim.
__________________________________________________
'09 250R woodcraft clip-ons 2 bros slip-on |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Are woodcraft clipon bars hollow? | ninja2007 | Ninjettes At Speed | 11 | October 1st, 2014 08:36 PM |
DIY- Woodcraft Clipon Install | kkim | 2008 - 2012 Ninja 250R Tech Talk | 503 | October 9th, 2013 08:46 AM |
Clipon Vortex or Woodcraft? | JaeL | 2008 - 2012 Ninja 250R Tech Talk | 16 | August 16th, 2009 05:26 PM |
woodcraft clipon towers | gizmogamez | Ninjettes At Speed | 5 | July 22nd, 2009 02:45 PM |
|
|