How to fix turn signal?

[47ninja]

So I droppped my bike a couple weeks ago backing it out of my driveway. It fell over on the right side. I broke it's fall a bit, but the impact was still enough to break my turn signal. See pics of the damage. What parts do I need to fix this? The only piece that looks missing is the bulb, although the clear plastic cover broke off as well. I can use the one screw to sort of hold it in place, but it won't snap secure to the black plastic piece, which is why it is dangling off to the side in the pictures.

Also, when I use the turn signal, the rear one just lights up without any blinking. Is there perhaps some damage to the internal wiring?

[cuong-nutz]

The turn signal lense popped off. Its held in by a screw and a tab on the lens. Replace the bulb, rotate the lens, and snap in or remove screw, snap, and install screw.

[Gorilla25]

Originally Posted by 47ninja

I can use the one screw to sort of hold it in place, but it won't snap secure to the black plastic piece, which is why it is dangling off to the side in the pictures.

Also, when I use the turn signal, the rear one just lights up without any blinking. Is there perhaps some damage to the internal wiring?

1. the tab broke. for a temp fix, replace the bulb and tape or hot glue the front back on.

2. its because there's something missing to complete the circuit...the light bulb