June 7th, 2015, 11:12 AM | #1 |
Newbie
Name: Andy
Location: Northern California
Join Date: Apr 2015 Motorcycle(s): 07 Ninja 250R Posts: 23
|
California Emissions Hose Routing?
The vacuum tubes that run from underneath the seat at the bottom of the gas tank, they keep kinking. Is this where they were originally routed? They keep kinking so then all of the sudden while I'm out and about, it will begin to bog down to a stop. All I do is unkink the hose, put the seat back on, and it runs perfectly fine. Any help here? Really trying to ride on this sunny day.
|
|
June 7th, 2015, 11:22 AM | #2 |
Newbie
Name: Andy
Location: Northern California
Join Date: Apr 2015 Motorcycle(s): 07 Ninja 250R Posts: 23
|
I guess i should clarify more.. The hose go from the tank underneath the mounting bracket for the tank... Do they originally go there?
|
|
June 11th, 2015, 02:48 PM | #3 |
ninjette.org member
Name: .
Location: SF
Join Date: Aug 2013 Motorcycle(s): ex250 Posts: 15
|
Post a pic. I would say yes they do go under there.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Carb Hose Routing | jschatte | 1986 - 2007 Ninja 250R Tech Talk | 6 | July 8th, 2014 08:30 AM |
vacuum hose routing | Sebastian f7 | 1986 - 2007 Ninja 250R Tech Talk | 2 | July 28th, 2013 07:06 AM |
Need Visual Confirmation of Carb Hose Routing | indr | 2008 - 2012 Ninja 250R Tech Talk | 3 | June 23rd, 2013 07:49 PM |
Routing for fuel overflow hose | haze5736 | 1986 - 2007 Ninja 250R Tech Talk | 3 | July 7th, 2011 07:09 PM |
Routing for 'side hose' on fuel tank | kobachi | 2008 - 2012 Ninja 250R Tech Talk | 11 | December 12th, 2010 05:00 PM |
|
|