May 18th, 2011, 09:17 PM | #1 |
ModMy250.com
Name: Tri
Location: St, Louis
Join Date: Sep 2010 Motorcycle(s): 2009 Ninja 250R, 2005 R6 Posts: A lot.
|
Hazard lights kit- Gauging interest
Hey guys, I wanted to see if there's interest for me to put together a kit that would allow you to have hazard lights on your new gen. It would likely work with the 07 and down, but I'd have to see a schematic to be sure. Anyways, I've already tested out my idea and it works. I just used existing parts I had and rigged something up to test it real quick. I don't have any of the actual parts, except for the relay so I can't post any pictures of a finished design.
Here's what the kit would include: Handle bar mounted switch (I've attached a stock photo) Tridon EP35 electronic relay Fuse holder w/10 amp fuse 2x wire taps The cost would be $50 shipped/ International would be extra. The kit would come prewired and I would suspect it would take maybe 20-30 minutes to install, not including the time it takes to remove the left side and rear fairings, and both seats. I'm using wire taps in this and not wire harnesses to keep the costs down. A new set of harnesses would add $10 to the kit.
__________________________________________________
The www.ModMy250.com guy Last futzed with by CThunder-blue; May 18th, 2011 at 09:29 PM. Reason: Lowered the cost to $50 |
|
June 24th, 2011, 04:33 PM | #2 |
ninjette.org guru
Name: Adam
Location: Orlando FL
Join Date: Jun 2011 Motorcycle(s): 2010 Kawasaki Ninja 250R red/black SE <-- totalled now '11 650r BLACK Posts: 334
|
That would be a nice feature to have. Would it work with LED signals? Like Protons and signal integrated brake lights?
__________________________________________________
Proud to stand by the fact that I saved my life by laying my bike down and sliding away from it, to avoid a T-Bone collision with a red light runner. |
|
June 24th, 2011, 08:43 PM | #3 |
ModMy250.com
Name: Tri
Location: St, Louis
Join Date: Sep 2010 Motorcycle(s): 2009 Ninja 250R, 2005 R6 Posts: A lot.
|
Yeah, they would work with any of the signals.
__________________________________________________
The www.ModMy250.com guy |
|
June 24th, 2011, 08:49 PM | #4 |
ninjette.org sage
Name: Joseph
Location: Winter Park, FL
Join Date: May 2011 Motorcycle(s): 2011 250R Black, 2005 ZX-6R Blue Posts: 623
|
I think I might be interested. Do you have any of those 250r stickers in Grey and Red?
|
|
June 24th, 2011, 10:38 PM | #5 |
ModMy250.com
Name: Tri
Location: St, Louis
Join Date: Sep 2010 Motorcycle(s): 2009 Ninja 250R, 2005 R6 Posts: A lot.
|
I have them in Silver and Red
__________________________________________________
The www.ModMy250.com guy |
|
June 27th, 2011, 07:47 AM | #6 |
ModMy250.com
Name: Tri
Location: St, Louis
Join Date: Sep 2010 Motorcycle(s): 2009 Ninja 250R, 2005 R6 Posts: A lot.
|
I think I just figured out a way to get hazard lights to work without the need for the relay. I'm going to order parts today and see if my idea works out. If it does, I'll post a DIY and not sell a kit since my idea is really simple.
__________________________________________________
The www.ModMy250.com guy |
|
June 27th, 2011, 08:14 AM | #7 |
ninjette.org sage
Name: Joseph
Location: Winter Park, FL
Join Date: May 2011 Motorcycle(s): 2011 250R Black, 2005 ZX-6R Blue Posts: 623
|
|
|
June 27th, 2011, 04:29 PM | #8 |
ninjette.org guru
Name: Anon
Location: Atlanta, GA
Join Date: Aug 2009 Motorcycle(s): 2008 Ninja 250 (Blue!) Posts: 488
|
What would installation entail? (interested!)
|
|
July 2nd, 2011, 08:34 PM | #9 |
ModMy250.com
Name: Tri
Location: St, Louis
Join Date: Sep 2010 Motorcycle(s): 2009 Ninja 250R, 2005 R6 Posts: A lot.
|
Here's the DIY I promised
http://www.ninjette.org/forums/showthread.php?t=78201 DIY and it should only cost you around $23
__________________________________________________
The www.ModMy250.com guy |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Gauging interest for a MD to PA weekend ride, next summer. | subxero | Group Rides and Local Events | 128 | June 8th, 2013 03:29 PM |
gauging interest in the tristate or who ever | fizzer914 | Group Rides and Local Events | 2 | June 24th, 2012 12:35 PM |
Gauging Interest: Gear Indicators (one with shift light, one without shiftlight) | SlowBoyRacing | Motorcycle-related | 13 | March 2nd, 2012 11:27 PM |
Gauging interest in another Exhaust GB | ztrack157 | Motorcycle-related | 39 | February 27th, 2012 12:15 AM |
|
|