HELP PLEASE!!! Proton's now flashing on both sides

b4idie · April 10th, 2012, 08:22 PM

I installed protons the other day along with a integrated blinker tail light with the electrical relay ep34 and everything worked perfectly. today, I just received hotbodies undertail and decided to put that on. As I was nearing the end of the install, I tried the blinkers and to my surprise the blinkers were blinking on all sides like a hazard light. So I disconnected the rear LEDs completely and tried it again and now both protons blink together any way I place the switch. Please helppppppp!!

PROBLEM SOLVED THANK YOU!!!

NathanUc · April 10th, 2012, 09:39 PM

Quote:

Originally Posted by b4idie

I installed protons the other day along with a integrated blinker tail light with the electrical relay ep34 and everything worked perfectly. today, I just received hotbodies undertail and decided to put that on. As I was nearing the end of the install, I tried the blinkers and to my surprise the blinkers were blinking on all sides like a hazard light. So I disconnected the rear LEDs completely and tried it again and now both protons blink together any way I place the switch. Please helppppppp!!

Make sure your grounding cable (from the EP34) is firmly attached to the frame. I had a similar issue when the grounding wire was slightly loose and caused my signals not to flash.

It might be related, it might not. I'm not really sure but it's something quick/easy to check.

dma · April 11th, 2012, 02:30 AM

http://www.ninjette.org/forums/showp...17&postcount=1

April 10th, 2012, 08:22 PM	#1
b4idie ninjette.org member Name: Jay Location: Atlanta Join Date: Mar 2012 Motorcycle(s): Ninja 250r and 08 zx10r Posts: 25	HELP PLEASE!!! Proton's now flashing on both sides I installed protons the other day along with a integrated blinker tail light with the electrical relay ep34 and everything worked perfectly. today, I just received hotbodies undertail and decided to put that on. As I was nearing the end of the install, I tried the blinkers and to my surprise the blinkers were blinking on all sides like a hazard light. So I disconnected the rear LEDs completely and tried it again and now both protons blink together any way I place the switch. Please helppppppp!! PROBLEM SOLVED THANK YOU!!! Last futzed with by b4idie; April 11th, 2012 at 03:03 PM. Reason: solved

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ECU Flashing	garth285	2013 - 2017 Ninja 300 Tech Talk	30	July 13th, 2015 11:47 AM
Dashboard flashing?	arnoldc6	2008 - 2012 Ninja 250R Tech Talk	4	March 27th, 2013 05:55 AM
Help needed: Weird flashing rate	chokne	2008 - 2012 Ninja 250R Farkles	8	June 28th, 2010 05:31 PM
Higher flashing rate on new turn signals???	Kitdog	2008 - 2012 Ninja 250R Farkles	10	June 25th, 2010 12:17 PM
Faster flashing signal	randomwalk101	2008 - 2012 Ninja 250R Tech Talk	9	January 23rd, 2010 11:56 PM

April 11th, 2012, 02:30 AM	#3
dma ninjette.org member Name: Derek Location: Chicago Suburbs Join Date: May 2011 Motorcycle(s): 09 Ninja 250 Posts: 18	http://www.ninjette.org/forums/showp...17&postcount=1