Draggin' Jeans with Kevlar 28 X 30 Utility Carpenter Style

[tcbmellowd]

• Price: $50 shipped OBO
• These Utility Draggin' Jeans by Fast Company have been used a few times and are in excellent condition.
• Size 28/30 Carpenter Style, they have a zipper and button in front, a velcroed large pocket on the right leg, and a velcroed loop on the left leg.
• They are 100% cotton
• 100% Kevlar lining inside on the butt and around both knees.
• The velcroed pocket has a small tear in the middle, the right knee has a small scuff, and there is a small faint stain on the left leg.
• New jeans currently sell for $120 on the website.

Utility Draggin' Jeans

Cover your ass!

The same Draggin’ Jean protection with a looser fit and lots of pockets for ear plugs, cell phones, gloves, etc. The Utility Draggin’ Jeans have a traditional carpenter-style seven pocket design with the change pocket on the left side for ease of use on your bike.

We use 14.5 ounce denim with a 13.5 ounce 100% Kevlar® lining. Our protective Kevlar® lining extends from just below the belt loops to, well, just below your ass. It extends vertically from hip seam to hip seam. To ensure protection in this looser fit, the Kevlar® has been extended to wrap all the way around the knees and shins.

Each pair of Draggin’ Jeans is handmade in the USA! They are pre-washed and pre-shrunk. We cut our jeans exactly true to size, so we recommend measuring a pair of your own jeans to get the right fit.

Available in Blue.

Fast Company Website Utility Draggin' Jeans

In general, Draggin' Jeans may be washed just like your regular jeans. Close zipper and button before laundering. We recommend a shorter wash cycle with less detergent and cool water to prevent unnecessary wear during washing. NEVER use any form of bleach (including detergents which contain bleach or color safe bleach) with any Kevlar® product. Tumble dry on warm or low setting (not hot). As with any cotton denim, we recommend that you should not over-dry the garment, as this could cause shrinkage.