Looking for a few stock parts used

jeffwessel · April 11th, 2009, 10:23 PM

So figured I would check with you guys who might have taken some stock parts off for aftermarket parts before I go buying them new.

I am looking for a clutch lever, left mirror, left front/rear turn signals, stock windscreen, and shifter.

Anyone who put on pazzo levers, aftermarket mirrors, flushmounts, or complete rear sets looking to get rid of their stock parts? :-)

Let me know, Jeff

Buffalony · April 12th, 2009, 05:58 AM

Went down huh..?

Me too

atleast it was the left side.
though a right side would have given a reason for a new pipe

I'm looking for some of these parts too. Rember if you decide to go OEM with the fairing that you have to order the foam exhaust sheilds too. I'm not positive if the old ones can easily be removed. I'll let you know I ya want. Good Luck.

And If you find any green Left lowers send me a pm plz

jeffwessel · April 12th, 2009, 10:38 AM

Quote:

Originally Posted by Buffalony

Went down huh..?

Me too

atleast it was the left side.
though a right side would have given a reason for a new pipe

I'm looking for some of these parts too. Rember if you decide to go OEM with the fairing that you have to order the foam exhaust sheilds too. I'm not positive if the old ones can easily be removed. I'll let you know I ya want. Good Luck.

And If you find any green Left lowers send me a pm plz

Yea wen't down a month ago. Got too low around a turn and scrapped the kickstand. Bike slid right out from underneath me. I will definitely let you know if I find any green left lowers, and yea, let me know if the exhaust padding comes off easy.

Snake · April 12th, 2009, 10:49 AM

Have you tried Ebay? From what I've seen thats where most everybody goes to find stuff.

jeffwessel · April 12th, 2009, 10:59 AM

Quote:

Originally Posted by rcuriel

Have you tried Ebay? From what I've seen thats where most everybody goes to find stuff.

Yep. been looking on ebay everyday. I would prefer to help out a forum member though.

Buffalony · April 12th, 2009, 07:21 PM

Hey jeff. check with richard from race bike rentals. He should have atleast a couple things from your list.

Theres only bs on ebay as far as fairings go. I think im gonna order an oem tom. Cause I gotta get this moving. Its been like two months. I could just buy a blinker and be on the road but I have to make it proper. I took the fairing off this morning. I looked at the padding real quick but I didnt spend any time on it yet cause i had to go to sleep. Good news is theres only one on the left. Im going back out later to work on this. I'll post back to let ya know how easily it comes off.

stupid stand. Do you have aftermarket pegs?

jeffwessel · April 12th, 2009, 09:00 PM

Quote:

Originally Posted by Buffalony

Hey jeff. check with richard from race bike rentals. He should have atleast a couple things from your list.

Theres only bs on ebay as far as fairings go. I think im gonna order an oem tom. Cause I gotta get this moving. Its been like two months. I could just buy a blinker and be on the road but I have to make it proper. I took the fairing off this morning. I looked at the padding real quick but I didnt spend any time on it yet cause i had to go to sleep. Good news is theres only one on the left. Im going back out later to work on this. I'll post back to let ya know how easily it comes off.

stupid stand. Do you have aftermarket pegs?

Yea, i've got woodcraft rear sets.

Buffalony · April 12th, 2009, 09:51 PM

Quote:

Originally Posted by jeffwessel

Yea, i've got woodcraft rear sets.

Yeah I thought the oem pegs touched first thats why I asked. just making sure. I just picked up new pegs so I'll have to watch for this. That or maybe just remove the stinking stand and hire a lil'person to hold my bike up. The only problem with that is I would have to remove my cowl to put the pass. seat back on.

M-Oorb · April 13th, 2009, 07:54 AM

As for putting the old heat shield foam from one fairing to another...I was able to do it. You just peel it off the old and I Gorilla Glued it to the new one using various weights and clamps to hold it on till it dried. Also...new OEM ones dont come with teh ninja sticker

...or at least mine didn't when I bought it about 7 months ago.

Buffalony · April 13th, 2009, 11:42 AM

Yeah it comes off fairly easy. I have a can of 3M 77 glue but thinks Im gonna put the new one on with velcro to save a couple of bucks if it happens again.

April 11th, 2009, 10:23 PM	#1
jeffwessel ninjette.org member Name: Jeff Location: Tempe/Chicago Join Date: Nov 2008 Motorcycle(s): 08 250 Posts: 43	Looking for a few stock parts used So figured I would check with you guys who might have taken some stock parts off for aftermarket parts before I go buying them new. I am looking for a clutch lever, left mirror, left front/rear turn signals, stock windscreen, and shifter. Anyone who put on pazzo levers, aftermarket mirrors, flushmounts, or complete rear sets looking to get rid of their stock parts? :-) Let me know, Jeff

April 12th, 2009, 05:58 AM	#2
Buffalony ninjette.org certified postwhore Name: Joe Location: Buffalo NY Join Date: Jan 2009 Motorcycle(s): 08 Ninja 250 "Wasabi", 82 Yamaha xj650j Posts: A lot.	Went down huh..? Me too atleast it was the left side. though a right side would have given a reason for a new pipe I'm looking for some of these parts too. Rember if you decide to go OEM with the fairing that you have to order the foam exhaust sheilds too. I'm not positive if the old ones can easily be removed. I'll let you know I ya want. Good Luck. And If you find any green Left lowers send me a pm plz __________________________________________________

April 12th, 2009, 07:21 PM	#6
Buffalony ninjette.org certified postwhore Name: Joe Location: Buffalo NY Join Date: Jan 2009 Motorcycle(s): 08 Ninja 250 "Wasabi", 82 Yamaha xj650j Posts: A lot.	Hey jeff. check with richard from race bike rentals. He should have atleast a couple things from your list. Theres only bs on ebay as far as fairings go. I think im gonna order an oem tom. Cause I gotta get this moving. Its been like two months. I could just buy a blinker and be on the road but I have to make it proper. I took the fairing off this morning. I looked at the padding real quick but I didnt spend any time on it yet cause i had to go to sleep. Good news is theres only one on the left. Im going back out later to work on this. I'll post back to let ya know how easily it comes off. stupid stand. Do you have aftermarket pegs? __________________________________________________

April 13th, 2009, 11:42 AM	#10
Buffalony ninjette.org certified postwhore Name: Joe Location: Buffalo NY Join Date: Jan 2009 Motorcycle(s): 08 Ninja 250 "Wasabi", 82 Yamaha xj650j Posts: A lot.	Yeah it comes off fairly easy. I have a can of 3M 77 glue but thinks Im gonna put the new one on with velcro to save a couple of bucks if it happens again. __________________________________________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP! 2009 Stock Parts Value?	ladyrocket	Motorcycle-related	3	April 14th, 2013 05:59 PM
A Few 2010 stock parts	NathanUc	Motorcycle-related	2	May 30th, 2012 01:27 AM
Stock parts off a 2012	saxnbass	Motorcycle-related	15	April 27th, 2012 08:39 PM
2011 stock parts..	greatwhiteninja	Motorcycle-related	20	August 24th, 2011 10:54 AM
Looking for stock parts (08+)	KTRacing38	Items Wanted	6	September 6th, 2010 12:05 AM

April 12th, 2009, 10:49 AM	#4
Snake ninjette.org certified postwhore Name: Rick Location: Alexandria, Louisiana Join Date: Jan 2009 Motorcycle(s): 05 Blue Ninja 250 Posts: Too much. MOTY - 2017, MOTM - Jan '19, Oct '16, May '14	Have you tried Ebay? From what I've seen thats where most everybody goes to find stuff.

April 13th, 2009, 07:54 AM	#9
M-Oorb ninjette.org sage Name: Matt Location: South East Florida/Rutgers University Join Date: Dec 2008 Motorcycle(s): 2008 250r (Fastest Color) Posts: 914	As for putting the old heat shield foam from one fairing to another...I was able to do it. You just peel it off the old and I Gorilla Glued it to the new one using various weights and clamps to hold it on till it dried. Also...new OEM ones dont come with teh ninja sticker ...or at least mine didn't when I bought it about 7 months ago.