January 25th, 2012, 08:18 PM | #1 |
ninjette.org member
Name: Broc
Location: America
Join Date: Dec 2009 Motorcycle(s): 2009 Ninja 250R Black - Sold / 2011 Honda CB1000R Posts: 176
|
08-12 Ninja 250r Exhaust & Chain/Sprocket Kit
EVERYTHING IS SOLD!
Up for sale are my OEM/aftermarket accessories that came off my previous 2009 Ninja 250R. I only accept PayPal and all prices reflect this fee and shipping. I will be shipping everything with UPS or USPS to your PayPal address. Everything was on the bike for around 3,000 miles +/- a few miles and a little over a year +/- a few months. All items have indications of normal use or wear & tear. All items are sold as is with no warranty. All items are used except for the chain/sprocket kit which is brand new & never installed. Even though all items are used they were removed from the bike in good working order. I will try to note all wear & imperfections of the used items to the buyer before hand. 2009 OEM Diablo Metallic Black Solo Seat Cowl - SOLD w/ grommet, oem paper work, & paperwork for a replacement grommet via your local hardware store! BikeMonkey Clear Integrated Taillight - SOLD w/ OEM connectors & the ability to also run your stock rear turn signals in conjunction. w/ led diode mod, (2) led flashers Black HMF Street Exhaust - SOLD w/ optional baffle installed (spark arrestor is general used to mount the baffle but I have made a custom plate & spring to hold the baffle under the end cap) See Picture. - Exhaust was taken off the bike in good working order and sounds very good. Exhaust has about 3,000 miles logged. - The baffle actually helps increase in the low/mid range ooomph as well. - Exhaust does have a mark all the way around the muffler where the mounting band installs. - The HMF logo looks a little rough around the edges from my meticulous washing of the bike - Baffle has surface rust. - See pictures for condition of the muffler/paint. - Heat Shield & all hardware included....(1) Large bolt clamp for the header tube & (2) worm clamps for the heat shield/beauty cover (does use the stock large muffler bolt from the stock muffler to mount to the exhaust hanger.) - Tip for installation. The exhaust is a crazy tight fit to the stock header tube even before the heavy duty bolt clamp. You must heat up the end of the exhaust and wiggle wiggle wiggle. Unless you are crazy strong. ***Just noticed I did not picture the silver end cap for the exhaust. Please see the picture below of the exhaust on the bike to see the end cap*** BRAND NEW Sprocket Center RK Gold Chain & Sprocket Kit - SOLD w/ GOLD RK 520XSO X-Ring Chain (cut to the correct length) w/ GOLD Rivet Style Master Link w/ 15t Chromoly Steel Front Sprocket w/ 45t Superlite Black Heat Treated Steel Rear Sprocket - There is one tiny tiny mark on the side of the rear sprocket from shipping. It is on the side with the white lettering. Circled in red. Bought the kit brand new at the link below.........Kit says it will fit a 88-10 Ninja 250 but I purchased the kit direct from a sales representative for a 2009 Ninja 250R http://www.sprocketcenter.com/p/9842...nja-88-10.html
__________________________________________________
2009 Black 250R - Stock and staying that way. No matter what you do it's still a 250 at the end of the day! Save your money for gear, riding lessons, & a 600cc Last futzed with by Broc; February 15th, 2012 at 09:18 AM. Reason: EVERYTHING IS SOLD! |
|
January 26th, 2012, 08:40 AM | #2 |
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.
|
I might be interested in the chain by itself. My gearing is different than what your offering.
PM me a price shipped if interested. Thanks
__________________________________________________
09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map |
|
January 26th, 2012, 09:51 AM | #3 |
ninjette.org member
Name: Broc
Location: America
Join Date: Dec 2009 Motorcycle(s): 2009 Ninja 250R Black - Sold / 2011 Honda CB1000R Posts: 176
|
I'd really like to sell the chain & sprockets together but if no one steps up we can definitely do that.
__________________________________________________
2009 Black 250R - Stock and staying that way. No matter what you do it's still a 250 at the end of the day! Save your money for gear, riding lessons, & a 600cc |
|
January 26th, 2012, 10:17 AM | #4 |
ninjette.org guru
Name: Paul
Location: Midwest
Join Date: Oct 2011 Motorcycle(s): 1999 Kawasaki ZRX1100, 2006 Yamaha R1, 2006 Kawasaki ZZR600, 2009 Kawasaki Ninja 250R, 2017 Kawasaki Z900 Posts: 320
|
How about the chain and just the rear sprocket?
|
|
January 26th, 2012, 10:49 AM | #5 |
ninjette.org guru
Name: Paul
Location: Midwest
Join Date: Oct 2011 Motorcycle(s): 1999 Kawasaki ZRX1100, 2006 Yamaha R1, 2006 Kawasaki ZZR600, 2009 Kawasaki Ninja 250R, 2017 Kawasaki Z900 Posts: 320
|
|
|
January 26th, 2012, 12:48 PM | #6 |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
Ill paypal you the money Monday when I get paid
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
January 26th, 2012, 05:40 PM | #7 |
ninjette.org member
Name: Broc
Location: America
Join Date: Dec 2009 Motorcycle(s): 2009 Ninja 250R Black - Sold / 2011 Honda CB1000R Posts: 176
|
Thanks Justin,
I would still like to sell the chain/sprocket kit as a whole but the prices below are what I would need to part out the kit: - Chain w/ master link - $100 Shipped - Front 15t sprocket - $20 Shipped - Rear 45t sprocket - $40 Shipped We shall wait a few days and if no one comes forward for the whole kit, I will piece it out. Thanks for the interest guys.
__________________________________________________
2009 Black 250R - Stock and staying that way. No matter what you do it's still a 250 at the end of the day! Save your money for gear, riding lessons, & a 600cc |
|
January 28th, 2012, 02:13 PM | #8 |
no joy
Name: Six
Location: Cali
Join Date: Nov 2009 Motorcycle(s): Ninja 2006 636 Posts: 408
|
hey what size rear tire is the chain cut for? stock or??
thanks |
|
January 28th, 2012, 10:03 PM | #9 |
ninjette.org member
Name: Broc
Location: America
Join Date: Dec 2009 Motorcycle(s): 2009 Ninja 250R Black - Sold / 2011 Honda CB1000R Posts: 176
|
Um what size tire? It should work for any rear tire size. The chain itself is cut to 106 links and comes with (1) rivet style masterlink. It is noted on the side of the box, you can barley see it over the bar code area in the picture.
I hope that answers your question?
__________________________________________________
2009 Black 250R - Stock and staying that way. No matter what you do it's still a 250 at the end of the day! Save your money for gear, riding lessons, & a 600cc |
|
January 28th, 2012, 11:03 PM | #10 |
ninjette.org sage
Name: Andy
Location: Indianapolis
Join Date: Aug 2011 Motorcycle(s): 2008 Kawasaki Ninja 250R Posts: 771
|
Still have the chain and the sprockets?
|
|
January 29th, 2012, 11:01 AM | #11 |
ninjette.org member
Name: Broc
Location: America
Join Date: Dec 2009 Motorcycle(s): 2009 Ninja 250R Black - Sold / 2011 Honda CB1000R Posts: 176
|
Yes sir. Still have the entire kit up for sale!
__________________________________________________
2009 Black 250R - Stock and staying that way. No matter what you do it's still a 250 at the end of the day! Save your money for gear, riding lessons, & a 600cc |
|
January 31st, 2012, 07:17 PM | #12 |
ninjette.org member
Name: Broc
Location: America
Join Date: Dec 2009 Motorcycle(s): 2009 Ninja 250R Black - Sold / 2011 Honda CB1000R Posts: 176
|
Bump Exhaust & Chain/Sprocket kit still up for grabs!
__________________________________________________
2009 Black 250R - Stock and staying that way. No matter what you do it's still a 250 at the end of the day! Save your money for gear, riding lessons, & a 600cc |
|
February 1st, 2012, 06:07 PM | #13 |
ninjette.org member
Name: Shawnay
Location: Ventura
Join Date: May 2011 Motorcycle(s): '11 Ninja 250 Posts: 10
|
How bout the right side fairing?
|
|
February 1st, 2012, 06:25 PM | #14 |
ninjette.org guru
Name: Paul
Location: Midwest
Join Date: Oct 2011 Motorcycle(s): 1999 Kawasaki ZRX1100, 2006 Yamaha R1, 2006 Kawasaki ZZR600, 2009 Kawasaki Ninja 250R, 2017 Kawasaki Z900 Posts: 320
|
Still interested in the rear sprocket.
|
|
February 1st, 2012, 06:43 PM | #15 |
ninjette.org member
Name: Broc
Location: America
Join Date: Dec 2009 Motorcycle(s): 2009 Ninja 250R Black - Sold / 2011 Honda CB1000R Posts: 176
|
I do not have any fairings for sale but how about that sweet HMF exhaust up there^? I traded the bike into a dealership. These are just the parts that are left.
PJ, Someone is interested in the entire kit at the moment. I will let everyone know if the sale goes through.
__________________________________________________
2009 Black 250R - Stock and staying that way. No matter what you do it's still a 250 at the end of the day! Save your money for gear, riding lessons, & a 600cc |
|
February 1st, 2012, 09:21 PM | #16 |
ninjette.org member
Name: Broc
Location: America
Join Date: Dec 2009 Motorcycle(s): 2009 Ninja 250R Black - Sold / 2011 Honda CB1000R Posts: 176
|
Chain/Sprocket kit SOLD! Only thing left is the HMF Exhaust!
__________________________________________________
2009 Black 250R - Stock and staying that way. No matter what you do it's still a 250 at the end of the day! Save your money for gear, riding lessons, & a 600cc |
|
February 3rd, 2012, 08:34 AM | #17 |
ninjette.org member
Name: Broc
Location: America
Join Date: Dec 2009 Motorcycle(s): 2009 Ninja 250R Black - Sold / 2011 Honda CB1000R Posts: 176
|
BUMP! Price lowered on the HMF Slip-on. Truly one of the best sounding exhausts. It sounds very nice with the baffle. I put this on the stock bike with no jetting/shimming and the bike ran fine. I shimmed the carbs needles with (2) washers each, removed the snorkel, and the bike ran even better!
__________________________________________________
2009 Black 250R - Stock and staying that way. No matter what you do it's still a 250 at the end of the day! Save your money for gear, riding lessons, & a 600cc |
|
February 6th, 2012, 11:42 AM | #18 |
ninjette.org member
Name: Broc
Location: America
Join Date: Dec 2009 Motorcycle(s): 2009 Ninja 250R Black - Sold / 2011 Honda CB1000R Posts: 176
|
Bump!
__________________________________________________
2009 Black 250R - Stock and staying that way. No matter what you do it's still a 250 at the end of the day! Save your money for gear, riding lessons, & a 600cc |
|
February 6th, 2012, 01:07 PM | #19 |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
Cowl received great shape! Thanks!
Great seller guys!
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
February 6th, 2012, 06:36 PM | #20 |
ninjette.org member
Name: Broc
Location: America
Join Date: Dec 2009 Motorcycle(s): 2009 Ninja 250R Black - Sold / 2011 Honda CB1000R Posts: 176
|
Thanks Justin!
With purchase of the exhaust I will throw in a free set of aftermarket silver foot pegs! They bolt on in minutes using the stock pins, e-clips, & springs. FREE with exhaust purchase! The pegs are exactly the ones below. You can also see them on the bike picture up above^ http://www.ebay.com/itm/88-09-Kawasa...item29fce5df83
__________________________________________________
2009 Black 250R - Stock and staying that way. No matter what you do it's still a 250 at the end of the day! Save your money for gear, riding lessons, & a 600cc |
|
February 7th, 2012, 07:33 PM | #21 |
ninjette.org member
Name: Broc
Location: America
Join Date: Dec 2009 Motorcycle(s): 2009 Ninja 250R Black - Sold / 2011 Honda CB1000R Posts: 176
|
BUMP! Price lowered......with free pegs as well.
__________________________________________________
2009 Black 250R - Stock and staying that way. No matter what you do it's still a 250 at the end of the day! Save your money for gear, riding lessons, & a 600cc |
|
February 13th, 2012, 09:02 AM | #22 |
ninjette.org member
Name: Broc
Location: America
Join Date: Dec 2009 Motorcycle(s): 2009 Ninja 250R Black - Sold / 2011 Honda CB1000R Posts: 176
|
bump.
__________________________________________________
2009 Black 250R - Stock and staying that way. No matter what you do it's still a 250 at the end of the day! Save your money for gear, riding lessons, & a 600cc |
|
February 13th, 2012, 04:22 PM | #23 |
ninjette.org member
Name: John
Location: Grand Rapids, Mi
Join Date: Apr 2011 Motorcycle(s): 2010 Ninja 250r Blue Posts: 63
|
Interested in the exhaust. PM sent.
|
|
February 15th, 2012, 09:16 AM | #24 |
ninjette.org member
Name: Broc
Location: America
Join Date: Dec 2009 Motorcycle(s): 2009 Ninja 250R Black - Sold / 2011 Honda CB1000R Posts: 176
|
Everything is SOLD! Thanks a lot everyone!
__________________________________________________
2009 Black 250R - Stock and staying that way. No matter what you do it's still a 250 at the end of the day! Save your money for gear, riding lessons, & a 600cc |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[sportrider - latest stories] - Roaring Toyz Introduces Aftermarket Accessories for 2 | Ninjette Newsbot | Motorcycling News | 0 | November 7th, 2012 10:00 PM |
[sportrider - latest stories] - Roaring Toyz Introduces Aftermarket Accessories for 2 | Ninjette Newsbot | Motorcycling News | 0 | November 6th, 2012 07:00 PM |
Kawasaki OEM accessories are EXPENSIVE! Engine Guards $293.95! Solo seat cowl $139.95 | CZroe | 2013 - 2017 Ninja 300 General Discussion | 11 | October 16th, 2012 08:12 PM |
|
|