April 30th, 2010, 03:46 PM | #1 |
ninjette.org newbie
Name: Spencer
Location: Ohio
Join Date: Apr 2010 Motorcycle(s): 2010 Ninja 250r Posts: 5
|
RPM problems on 2010 ninja 250r
hello guys, ok.. so my BRAND NEW 2010 250r just rolled past 300 miles last night... i changed the oil (yes i tq spec) last night it seemed great, but today when i took it out, the RPMS were WAY high.. normally 60pmh im around a comfortable 7500-7800 rpms... today i am at 9000, and the bike feels like a sled. when i filled oil i slightly overfilled BUT the level was still beneath top line..... on a side note it was 80 degrees today... but not sure if that really could make that kind of difference.
|
|
April 30th, 2010, 07:20 PM | #2 |
ninjette.org certified postwhore
Name: Rick
Location: Alexandria, Louisiana
Join Date: Jan 2009 Motorcycle(s): 05 Blue Ninja 250 Posts: Too much.
MOTY - 2017, MOTM - Jan '19, Oct '16, May '14
|
Changing your oil should not cause those issues. You might want to check your cdi.
|
|
April 30th, 2010, 07:22 PM | #3 |
Join Date: Nov 2008 Posts: Too much.
|
what kind of oil did you use?
|
|
May 1st, 2010, 12:27 PM | #4 |
ninjette.org newbie
Name: Spencer
Location: Ohio
Join Date: Apr 2010 Motorcycle(s): 2010 Ninja 250r Posts: 5
|
10w 40 kawi motorcycle oil, and whats cdi stand for?
|
|
May 1st, 2010, 12:43 PM | #5 | |
ninjette.org member
Name: Peter
Location: Deep South, USA
Join Date: Dec 2009 Motorcycle(s): 2009 Special Edition Ninja 250 a good memory, 2011 Suzuki DL 650 the new ride Posts: 131
|
Quote:
http://www.ninjette.org/forums/showthread.php?t=21043 |
|
|
May 6th, 2010, 08:37 AM | #6 |
Highway Ramp Hero
Name: Tom
Location: MI
Join Date: Mar 2010 Motorcycle(s): 09 250r Posts: 209
|
The ignition on this bike is a joke.
Upgradeing is cheap though. Pick up a race CDI from Sportisi. I ordered mine last week. Can't wait |
|
May 28th, 2010, 07:52 AM | #7 |
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.
|
You have an update on this?
__________________________________________________
09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map |
|
May 28th, 2010, 08:34 AM | #8 |
Highway Ramp Hero
Name: Tom
Location: MI
Join Date: Mar 2010 Motorcycle(s): 09 250r Posts: 209
|
TSI came in the mail this week.
As soon as it's on the bike I'll post an update. Might not be this weekend though, as I have to get the car ready for racing season.
__________________________________________________
Too many mods for a 200 character sig... |
|
June 1st, 2010, 04:59 AM | #9 |
Highway Ramp Hero
Name: Tom
Location: MI
Join Date: Mar 2010 Motorcycle(s): 09 250r Posts: 209
|
Got the TIS on the bike now.
Rode it to work this morning (1 hour ride) no issues. Was cool out though, so there probably wouldn't have been any with the stock ignition either... On the way home it should hit 90s, so if I experience any issues, I'll post again. If not, consider it solved
__________________________________________________
Too many mods for a 200 character sig... |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Just cleaned carbs - now stuttering at low RPM, fine at high RPM | Ohio | 2008 - 2012 Ninja 250R Tech Talk | 20 | August 5th, 2014 10:30 PM |
Higher RPM Problems!! | cameronatkinson | 2008 - 2012 Ninja 250R Tech Talk | 5 | August 17th, 2011 06:47 AM |
Common Problems with Ninja 250r | Ragnar1x | 1986 - 2007 Ninja 250R Tech Talk | 15 | May 31st, 2011 01:02 PM |
Having sum problems with Ninja 250R 09 | nat1ve | 2008 - 2012 Ninja 250R Tech Talk | 13 | November 12th, 2010 09:59 AM |
Ninja 250r 2009 - first 300 miles impressions/problems | hackeron | 2008 - 2012 Ninja 250R Tech Talk | 7 | September 12th, 2010 10:20 PM |
|
|