my clothes fell off! cafe build - Page 3

RacinNinja · April 29th, 2016, 04:13 PM

Quote:

Originally Posted by crazymadbastard

Put some gas in it and fired it up it's friggin LOUD. Pretty much done except for some wiring and I have bled and bled and bled that master, can't get rid of that mushy brake feel. Ordered a rebuild kit and should be here Sunday- Amazon Prime Shipping. Lets see if its the correct one .

Gonna keep pushing this til it's done.

Turn the bars to the right so the inlet for the reservoir fluid is at the top.

Zip tie the lever to the bars overnight, maybe two nights.

See if that firms your lever up.

crazymadbastard · April 29th, 2016, 07:48 PM

Quote:

Originally Posted by RacinNinja

Turn the bars to the right so the inlet for the reservoir fluid is at the top.

Zip tie the lever to the bars overnight, maybe two nights.

See if that firms your lever up.

Thank you, already tried that for at least a week. Earlier today I put about 200 cc of brake fluid through a giant injection needle through the reservoir and out both calipers. Still mushy. The master is from a 2002 zzr 600, pretty much all it could be.

RacinNinja · April 29th, 2016, 09:02 PM

Quote:

Originally Posted by crazymadbastard

Thank you, already tried that for at least a week. Earlier today I put about 200 cc of brake fluid through a giant injection needle through the reservoir and out both calipers. Still mushy. The master is from a 2002 zzr 600, pretty much all it could be.

I agree.

Time for a rebuild!

crazymadbastard · May 2nd, 2016, 10:57 AM

Disassembled and cleaned out master, rear seal is worn front seal was ok. Amazon K&L kit did not fit. I am working with All Balls on getting the right kit.
This master is a Nissin 4v 14mm

crazymadbastard · May 23rd, 2016, 05:17 PM

Rebuilt front master, made brackets for front brake lines, rear and front master, exhaust hanger, tray for electricals, speedo sensor, wired headlight and front turn signals, wired stop light. I need to cut seat mount coolant overflow and cut seat. She will be road ready but still a work in progress. : )

Alex · June 21st, 2016, 06:08 AM

Good luck!

May 2nd, 2016, 10:57 AM	#84
crazymadbastard I'm crazy,your excuse is? Name: Winston Location: Connecticut Join Date: May 2013 Motorcycle(s): 250 2007 ninja Posts: A lot.	Disassembled and cleaned out master, rear seal is worn front seal was ok. Amazon K&L kit did not fit. I am working with All Balls on getting the right kit. This master is a Nissin 4v 14mm __________________________________________________ My Cafe Racer Build My intro post

June 21st, 2016, 06:08 AM	#86
Alex ninjette.org dude Name: 1 guess :-) Location: SF Bay Area Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much. Blog Entries: 7	Good luck! __________________________________________________ Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rich's Cafe Build thread	extremez31	1986 - 2007 Ninja 250R Tech Talk	43	September 4th, 2015 05:31 PM
My 07 250 cafe racer build	elephantman78	1986 - 2007 Ninja 250R Farkles	12	December 25th, 2014 07:09 AM
My Cafe Racer Build	girlracer	1986 - 2007 Ninja 250R Farkles	17	December 2nd, 2014 08:14 AM
99 Ex 250 project Cafe/streetfighter, The build thread.	cerberusrex25	1986 - 2007 Ninja 250R Tech Talk	260	June 14th, 2014 04:27 PM
Clothes	Apex	Off-Topic	7	October 4th, 2012 07:09 PM