September 7th, 2009, 08:50 AM | #1 |
ninjette.org guru
Name: mike
Location: tucson az
Join Date: Dec 2008 Motorcycle(s): ninja 250r Posts: 371
|
for the ones with clipons????
I just wanted to know what you guys have used for the top of the forks when you installed the clip-on's I find that it looks bare and should have somekind of caps or something thanks mike
__________________________________________________
08 250R: sportisi VR full exhaust, Dynojet, custom seat, kleen air rmvd, rim tape, grips, fender chop,zg db windscreen,k&n air filter,15t front sprocket,sportisi-usa clipons,solo seat cowl |
|
September 7th, 2009, 08:53 AM | #2 |
ninjette.org guru
Name: mike
Location: tucson az
Join Date: Dec 2008 Motorcycle(s): ninja 250r Posts: 371
|
just in case
__________________________________________________
08 250R: sportisi VR full exhaust, Dynojet, custom seat, kleen air rmvd, rim tape, grips, fender chop,zg db windscreen,k&n air filter,15t front sprocket,sportisi-usa clipons,solo seat cowl |
|
September 7th, 2009, 09:12 AM | #3 |
Bike Thrasher
Name: JaeL
Location: Omaha
Join Date: Apr 2009 Motorcycle(s): 2008 EX250r Posts: 334
Blog Entries: 10
|
notta
__________________________________________________
Intuitive Sliders, Aftermarket pegs, Custom Paint, Seat Cowl, Tinted Screen, Aftermarket flush mounts, Wheel Tape, Fender Chopped, Stock Shortie Exhaust and Woodcraft ClipOns |
|
September 7th, 2009, 09:19 AM | #4 |
ninjette.org guru
Name: mike
Location: tucson az
Join Date: Dec 2008 Motorcycle(s): ninja 250r Posts: 371
|
man their has to be something
__________________________________________________
08 250R: sportisi VR full exhaust, Dynojet, custom seat, kleen air rmvd, rim tape, grips, fender chop,zg db windscreen,k&n air filter,15t front sprocket,sportisi-usa clipons,solo seat cowl |
|
September 7th, 2009, 09:25 AM | #5 |
ninjette.org guru
Name: mike
Location: tucson az
Join Date: Dec 2008 Motorcycle(s): ninja 250r Posts: 371
|
man i found this i will have to give them a call
http://www.k-factory.com/eng/ONLINE-...ja250r_08.html its half way down the page
__________________________________________________
08 250R: sportisi VR full exhaust, Dynojet, custom seat, kleen air rmvd, rim tape, grips, fender chop,zg db windscreen,k&n air filter,15t front sprocket,sportisi-usa clipons,solo seat cowl |
|
September 7th, 2009, 09:34 AM | #6 |
ninjette.org guru
Name: mike
Location: tucson az
Join Date: Dec 2008 Motorcycle(s): ninja 250r Posts: 371
|
sent them an em will see what happends
__________________________________________________
08 250R: sportisi VR full exhaust, Dynojet, custom seat, kleen air rmvd, rim tape, grips, fender chop,zg db windscreen,k&n air filter,15t front sprocket,sportisi-usa clipons,solo seat cowl |
|
September 7th, 2009, 09:44 AM | #7 |
ninjette.org certified postwhore
Name: Kim
Location: mundo de ensueño
Join Date: Nov 2008 Motorcycle(s): '08 250 Posts: A lot.
|
do you mean the bridge? look for Nick's GPS mount - I think it looked pretty sweet (NJD022588)
__________________________________________________
Progrip tank pad, blue rim stripes, blue Pazzos, Roaring Toyz lowering kit, Puig DB in dark smoke, Cortech sport tail, super mini tank, and saddlebags, OES swingarm spools and Intuitive frame sliders |
|
September 7th, 2009, 10:16 AM | #8 |
ninjette.org guru
Name: mike
Location: tucson az
Join Date: Dec 2008 Motorcycle(s): ninja 250r Posts: 371
|
no this
__________________________________________________
08 250R: sportisi VR full exhaust, Dynojet, custom seat, kleen air rmvd, rim tape, grips, fender chop,zg db windscreen,k&n air filter,15t front sprocket,sportisi-usa clipons,solo seat cowl |
|
September 7th, 2009, 10:46 AM | #9 |
ninjette.org member
Name: Matt
Location: Keller, TX
Join Date: Dec 2008 Motorcycle(s): 2008 Ebony Ninja 250R Posts: 137
|
These would work, but with modifications. They are meant to be used after you open up the fork. Good luck with that. I left my bridge naked.
__________________________________________________
Matt 2008 Ebony Ninja 250R (a.k.a. "Venom") |
|
September 7th, 2009, 10:47 AM | #10 |
ninjette.org sage
Name: Greg
Location: central new york
Join Date: Aug 2009 Motorcycle(s): 90 Suzuki gsx600f Katana, 03 Buell XB9R Posts: 868
|
Put a billet triple clamp on there and then the fake adjusters in the tubes.
|
|
September 7th, 2009, 04:01 PM | #11 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
I think you can find some plastic plugs that will fit but your going to have to search for them
__________________________________________________
Sportisimoto USA is born. |
|
September 8th, 2009, 03:51 PM | #12 |
ninjette.org sage
Name: patricK
Location: San Jose, CA--BAY AREA!
Join Date: Mar 2009 Motorcycle(s): '08 blue 250R [sold]. '09 lime ZX-6R [stolen :( ]. '06 blue 636. Posts: 918
|
use some black tape or something
I left it as is. my opinion is, who cares? it's just the looks of the bike. adding some cap won't make it faster nor perform better, nor make you a more skilled rider. |
|
September 8th, 2009, 06:03 PM | #13 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
GP type Full exhaust muffler NEW!
Specs :Exhaust pipe・Stainless/Silencer・Titanium SBL-GP type Weight:2.81kg Price:¥126,000(including tax) Oil element ○ Tandem step ○ Normal step ○ Center stand - Under cowl ○ Oil exchange ○ Volume:100db System 2-1 woah... thats like 13hundred buks! and about $150 for that fork cap. id grab that radiator protector if it wasnt almost $150 as well. they make some great looking things there at K-factory though. cant justify spending that much just yet though :P |
|
September 8th, 2009, 07:35 PM | #14 |
ninjette.org guru
Name: mike
Location: tucson az
Join Date: Dec 2008 Motorcycle(s): ninja 250r Posts: 371
|
it is some nice stuff but at the price way to much
__________________________________________________
08 250R: sportisi VR full exhaust, Dynojet, custom seat, kleen air rmvd, rim tape, grips, fender chop,zg db windscreen,k&n air filter,15t front sprocket,sportisi-usa clipons,solo seat cowl |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
What woodcraft clipons do i need? | rtb | 2008 - 2012 Ninja 250R Tech Talk | 3 | May 8th, 2014 04:32 AM |
Clipons/Rearsets | Panda | 2008 - 2012 Ninja 250R Farkles | 6 | December 11th, 2012 01:10 PM |
driven clipons | rusninja | Motorcycle-related | 5 | November 28th, 2012 12:19 AM |
clipons and levers | eds2fitty | 2008 - 2012 Ninja 250R Farkles | 9 | August 26th, 2011 07:51 PM |
shinto clipons | illrational | 2008 - 2012 Ninja 250R Farkles | 49 | October 6th, 2010 09:40 PM |
|
|