February 15th, 2011, 05:46 PM | #1 |
ninjette.org member
Name: Shannon
Location: Georgia
Join Date: Aug 2009 Motorcycle(s): 2009 Ninja 250r Posts: 54
|
Anyone still have washers for the shim?
I sent a message to the guy that had some offered, but haven't gotten a reply.
I can't seem to find the right ones online. I found some at the fastenal website, but I'm not a member or whatever...so I can't order them. Does anyone have some leftover they'd be willing to send me? I'll send you a few bucks through paypal. Or link me to the correct ones at the site I can buy them from? I want to order the right ones. Thanks! |
|
February 15th, 2011, 06:22 PM | #2 |
ninjette.org guru
Name: .
Location: .
Join Date: Nov 2010 Motorcycle(s): . Posts: 331
|
SAE #4 washers. PM me your address. I'll send some your way. |
|
February 15th, 2011, 06:27 PM | #3 |
ninjette.org member
Name: mike
Location: troy missouri
Join Date: Aug 2010 Motorcycle(s): 2009 ninja 250r, 2009 buell xb12ss Posts: 28
|
quick question, are the washers supposed to be able to fit inside the plastic piece attatched to the spring? i can see where the head of the needle will sit but my washers are just a tad too big. advice?
|
|
February 16th, 2011, 08:41 PM | #4 |
Join Date: Nov 2008 Posts: Too much.
|
should look like this...
use 3mm or sae#4 washers. bigger washers can lead to problems. |
|
February 18th, 2011, 09:23 AM | #5 |
Smoker
Name: Bob
Location: SoCal
Join Date: Dec 2010 Motorcycle(s): Guess.... Posts: 556
|
Take your needle and go to a hardware store. Not Home Depot or Lowes, I mean a real hardware store, and find one of hte old dudes working there and tell him you want some stainless washers for the needle. For less than a buck you'll leave with a handful.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Perfect carb needle shim washers | 37coupe | 2008 - 2012 Ninja 250R Tech Talk | 4 | April 5th, 2015 04:07 PM |
Washers and machine screws | Singh2jz | Miscellaneous | 0 | March 29th, 2015 01:24 AM |
Washers for carb shimming | broilmebk | Free stuff! | 1 | June 15th, 2014 02:56 PM |
shim-shimminy, shim-shimminy, shim & exhaust REPORT | evi1joe | 2008 - 2012 Ninja 250R Tech Talk | 9 | December 7th, 2011 08:41 PM |
3mm washers | indr | 2008 - 2012 Ninja 250R Tech Talk | 3 | December 11th, 2010 11:32 AM |
|
|