April 29th, 2015, 04:48 PM | #1 |
ninjette.org member
Name: Jason
Location: Scotland
Join Date: Nov 2014 Motorcycle(s): 2010 Kawasaki Ninja 250r FI Posts: 205
Blog Entries: 1
|
Woodcraft clip one and yoshimura rearset bracket mod
Did these mods over the weekend, here's some pics of what I did.
Tools for the job.. Begin working on the rearset brackets.. The rear brake resovoir hose must be chopped by 67mm for clearance issues |
|
April 29th, 2015, 04:55 PM | #3 |
ninjette.org member
Name: Jason
Location: Scotland
Join Date: Nov 2014 Motorcycle(s): 2010 Kawasaki Ninja 250r FI Posts: 205
Blog Entries: 1
|
Once the hose is shortened you just put locktite on the bolts and bolt the bracket on and your rearset onto the bracket. I adjusted my brake lever lower and also my gear lever a bit to match the new position.
|
|
April 29th, 2015, 05:02 PM | #6 |
ninjette.org certified postwhore
Name: Jason
Location: Monroe, MI
Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot.
MOTM - June '15
|
Cool, that's pretty much what I did with my bike as well.
__________________________________________________
'82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less. |
|
April 29th, 2015, 05:58 PM | #8 |
Private Joker
Name: Ben
Location: Towson, MD
Join Date: Nov 2012 Motorcycle(s): '99/'01 Ninja 250 "sketchy", '13 Ninja 300 "yoshi", '03 GSXR 600 "merlin" Posts: A lot.
MOTM - Mar '14
|
Nice!, I have the same mods to my track 250 and it really improved the feel of the bike
If I had to do it again, or rather when I do it again I'm getting real rearsets, the feel difference is ridiculous and it really helps with rotating your foot around the peg
__________________________________________________
I see you over there seeing me, do you see the me I think you see? |
|
April 29th, 2015, 06:09 PM | #9 |
Freedom for Germany
Location: This World
Join Date: May 2011 Motorcycle(s): Ninja 250R-FI Posts: A lot.
|
Nice mods and if you like to adjust the angle of the clip-ons then this is the way to go (I didn't like that they are attached to the upper triple)
Link here: https://www.woodcraft-cfm.com/cgi-bi...&key=12-SPACER |
|
April 29th, 2015, 08:30 PM | #10 |
ninjette.org member
Name: Eli
Location: Humboldt Ca
Join Date: Oct 2014 Motorcycle(s): ninja 250 Posts: 48
|
Looks nice I had a set of the ebay rear sets on my bike until last weel when I got my sportisi tire hugger and realized there was no way in hell they were going to fit together. Is there anybody else out there that has a Sportisi rear hugger and rear sets and if so what brand of rear sets are you running???
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Woodcraft Clip-on/Rearset Adjusters | d.c.george | 2008 - 2012 Ninja 250R Tech Talk | 2 | June 7th, 2012 07:46 PM |
|
|