ninjette.org

Go Back   ninjette.org > 2013 - 2017 Ninja 300 > 2013 - 2017 Ninja 300 Tech Talk

Reply
 
Thread Tools
Old July 9th, 2022, 04:33 PM   #1
Fred659
ninjette.org member
 
Name: Frederic
Location: Quebec City
Join Date: Jan 2020

Motorcycle(s): 08 Race Preped ZX-10r, 09 Race Preped Ninja 250 (not finished yet). 74 Norton Commando 850 (Project)

Posts: 29
DIY - Oil Cooler Kit

Hi everybody,

It's been a long time since I posted here but I think this is a good one. My race ninja 250 now has a 300 engine in it (RIP 250) and it has 43 hard working horses at the wheel. Last year, the water temp was always 110c at the end of my sessions and I had to change the oil quite often. Long story short, I decided to put an oil cooler on the bike, yes for cooling, but for the extra oil capacity too. I now use 10w50 oil in the bike.

The hard part was to find the plate that would fit the 300 bloc. the rest is pretty strait forward. You can see the machining on the plate on the pictures of the plate on the bike. Now the temp stay below 100c and oil at around 110c. Please note that I have a Yosh full system and hoses routing can vary on your application. I did put some header tape to reduce the heat near the hoses just for safety.


Hi hope that my thread will help some of you guys. So, the most economic way I found is the following:


Sandwich plate: GReddy Engine Oil Block Cooler Sandwich Plate Adapter, Type E M20 x 1.50 -10AN (it has a thermostat)
You need to shave the plate to have a max diam of 71mm or it wont fit the 300 block. The adaptor is m20 to 3/4-16
https://conceptzperformance.com/gred...al_p_31777.php

Oil Filter : Wix WL10239 or Toro Equivalent
this is important because you need to have the gasket of the filter on the flat part of the plate and the stock filter won't do the trick.
wixfilters.com/Lookup/PartDetails.aspx?Part=2162117

Oil cooler : 2003–2012 sv650

AN10 fittings for the Oil Cooler (2X): AN10 to m12 x 1.0mm
https://www.amazon.ca/-/fr/gp/produc...?ie=UTF8&psc=1

AN10 fittings kit: cheap amazone one.
https://www.amazon.ca/-/fr/gp/produc...?ie=UTF8&psc=1

Temp Gauge: Cheap ebay / amazon one
https://www.ebay.ca/itm/164301269908...MAAOSwA8VfF-GP


DSC_0836.jpg

DSC_0835.jpg

DSC_0790.jpg

DSC_0849.jpg

DSC_0842.jpg

DSC_0846.jpg

DSC_0848.jpg

DSC_0850.jpg

DSC_0864.jpg

DSC_0863.jpg

DSC_0973.jpg

Last futzed with by Fred659; July 9th, 2022 at 04:34 PM. Reason: add thermostat comment
Fred659 is offline   Reply With Quote




Old July 9th, 2022, 06:08 PM   #2
Topaz
ninjette.org member
 
Topaz's Avatar
 
Name: Topaz
Location: South Florida
Join Date: Mar 2017

Motorcycle(s): 2013 Ninja 300

Posts: 202
Very impressive!

@Ghostt may enjoy this post, as he's working on fitting a 300 engine in a 250.
Topaz is offline   Reply With Quote


Old July 16th, 2022, 09:22 AM   #3
Ghostt
in your machine
 
Ghostt's Avatar
 
Name: Scott
Location: Summer Shade, Ky.
Join Date: Oct 2014

Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN"

Posts: A lot.
Blog Entries: 25
MOTM - Jun '17, May '16, Mar '15
Quote:
Originally Posted by Topaz View Post
Very impressive!

@Ghostt may enjoy this post, as he's working on fitting a 300 engine in a 250.
I had an oil cooler on the bike before the engine went. Not planning on putting one on at this time.

I don't race the bike, and it will get limited use, as I have other bikes to ride, but we shall see.

Looks like a clean install, well done @Fred659
__________________________________________________
violente et ignorantia

ZX-2R BLOG
Twitter and Instagram = Ghostt_Scott
I'm not here to change your mind, just to inform.
Ghostt is offline   Reply With Quote


Old August 5th, 2022, 08:03 AM   #4
Alex
ninjette.org dude
 
Alex's Avatar
 
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008

Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE, '15 CRF110F, '13 TT-R50E

Posts: Too much.
Blog Entries: 7
Nice work!
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org

ninjette.org Terms of Service

Shopping for motorcycle parts or equipment? Come here first.

The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered)
Alex is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
Ninja 250 Engine Oil Cooler DaBlue1 2008 - 2012 Ninja 250R Tech Talk 78 November 10th, 2016 12:47 AM
[webbikeworld.com] - Cox Racing Group Radiator and Oil Cooler Guard Review Ninjette Newsbot Motorcycling News 0 December 12th, 2015 08:01 AM
[webbikeworld.com] - R&G Radiator and Oil Cooler Guard Review Ninjette Newsbot Motorcycling News 0 December 12th, 2015 08:01 AM
FS: Asia Works 250R Oil Cooler DJK Motorcycle-related 11 June 10th, 2015 08:05 PM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 02:41 PM.


Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2022 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are Copyright 2022 ninjette.org, All rights reserved.