September 21st, 2014, 11:05 AM | #1 |
ninjette.org guru
Name: xorbe
Location: Bay Area, CA
Join Date: Jun 2013 Motorcycle(s): N650 (and others) Posts: 408
|
Easiest way to obtain this side cover grommet?
Is Partzilla legit for ordering parts? How long do they take? Is this something a local dealer might stock for less than $8?
Part 92075 here: http://www.partzilla.com/parts/searc...VER/parts.html Linked at the bottom of that page for $1.96, but $5.95 for shipping! http://www.partzilla.com/parts/detai...2075-1067.html edit: Hah, they charge less than half s/h thru their ebay storefront. But it would be nice to buy local. |
|
September 21st, 2014, 11:10 AM | #2 |
ninjette.org certified postwhore
Name: Rebecca
Location: SF Bay Area
Join Date: Sep 2009 Motorcycle(s): 2013 Ninja 300 w/ ABS, 2014 NC700X, 2008 Ninja 250 (sold), 2002 Ninja 250 (sold) Posts: A lot.
MOTM - Jan '18, Sep '13
|
Partzilla has been good for me, but only if you're actually ordering a decent amount of stuff to justify the shipping cost. When I only need one small bolt or a grommet like that, I'll just go to the dealership. Partzilla is showing the list price of ~$3.
__________________________________________________
My Ninja 300 |
|
September 21st, 2014, 12:13 PM | #3 |
sammich maker
Name: snot
Location: West Ohio - in the kitchen
Join Date: Feb 2012 Motorcycle(s): 2013 white 300, 09 KLX 250 SF, 09 thunder blue 250(traded) Posts: A lot.
MOTM - Apr '15
|
Check local parts house. The "help" section usually has assorted grommets and stuff.
|
|
September 21st, 2014, 12:50 PM | #4 |
Certified looney toon
Name: Teri
Location: 39°52'40.7"N 118°23'53.8"W (Northern NV)
Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250, 102k+ miles -- 2014 CB500X, 42k+ miles Posts: A lot.
Blog Entries: 16
MOTM Jul '13, Jul '14
|
I've picked up a few at the local hardware store. Just need the inside and outside diameters, so I'd take the lower one in to measure.
The one's I found were in the aisles with the nuts and bolts.
__________________________________________________
<-- Linky Hey Unregistered! The code [you] shows the username currently logged in. IBA # 56020 AMA # 521481 Fun Rides! ][ My Videos ][ My Gear Hold yourself to the same rules you expect others to follow. |
1 out of 1 members found this post helpful. |
September 21st, 2014, 01:35 PM | #5 |
ninjette.org certified postwhore
Name: Paul
Location: UK
Join Date: Apr 2014 Motorcycle(s): Ninja 250, Yamaha RS200 (classic) Posts: A lot.
|
If you still have a lug to push onto the grommet you are doing better than many pregen owners
|
1 out of 1 members found this post helpful. |
September 24th, 2014, 07:31 PM | #6 |
Grouchy Old Squid
Name: Joe
Location: Clinton, Ar.
Join Date: Apr 2014 Motorcycle(s): 2006 Ninja 250, 1993 Yamaha FJ 1200 ABS, 1990 Yamaha FJ 1200, 2014 Can Am Spyder RT-S Posts: 37
|
|
|
September 30th, 2014, 06:33 PM | #7 |
World Class Ninja
Name: Rusty
Location: West Chester PA
Join Date: Sep 2014 Motorcycle(s): 2002 Ninja 250, 96 VFR750, 79 Yamaha XS1100 Special Posts: 224
|
Good content I'm in the same boat I was very surprised when I popped my side covers off to find all the **** (I'm assuming that is what they are called that is what they are called in a few owners manuals I've seen)
|
|
September 30th, 2014, 06:45 PM | #8 |
ninjette.org guru
Name: xorbe
Location: Bay Area, CA
Join Date: Jun 2013 Motorcycle(s): N650 (and others) Posts: 408
|
I am stumped on the censored word for once. Actually, that was my best guess below. At least they don't censor bung, shitake mushrooms, balls, bloody, flange, or knob.
|
|
September 30th, 2014, 07:00 PM | #9 |
World Class Ninja
Name: Rusty
Location: West Chester PA
Join Date: Sep 2014 Motorcycle(s): 2002 Ninja 250, 96 VFR750, 79 Yamaha XS1100 Special Posts: 224
|
Haha didn't think that would be censored. T I T S
|
|
October 6th, 2014, 03:02 PM | #10 |
ninjette.org guru
Name: xorbe
Location: Bay Area, CA
Join Date: Jun 2013 Motorcycle(s): N650 (and others) Posts: 408
|
Just ordered from partzilla via ebay for $4.55 total. Two weekends went by, and I never got myself down to the parts store. Should have ordered online weeks ago!!!
|
|
October 12th, 2014, 12:12 AM | #11 |
ninjette.org guru
Name: xorbe
Location: Bay Area, CA
Join Date: Jun 2013 Motorcycle(s): N650 (and others) Posts: 408
|
Boom head shot! Master mechanic move of the month.
|
1 out of 1 members found this post helpful. |
October 14th, 2014, 07:13 AM | #12 |
World Class Ninja
Name: Rusty
Location: West Chester PA
Join Date: Sep 2014 Motorcycle(s): 2002 Ninja 250, 96 VFR750, 79 Yamaha XS1100 Special Posts: 224
|
__________________________________________________
Life is not a journey to the grave with the to arrive safely in one pretty and well preserved piece, but to skid across the line, thoroughly used up, worn out, leaking oil, shouting, GERONIMO! |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Need windshield screw and plastic grommet/nut for 02 | highpsiguy | Items Wanted | 2 | August 26th, 2010 09:06 AM |
How to obtain your motorcycle license? | jonthechron | General Motorcycling Discussion | 10 | June 12th, 2010 07:26 AM |
|
|