April 24th, 2013, 03:01 PM | #1 |
Daily Ninjette rider
Name: Hernan
Location: Florida
Join Date: Mar 2011 Motorcycle(s): 2007 Ninja 250 Posts: A lot.
MOTY - 2016, MOTM - Dec '12, Jan '14, Jan '15, May '16
|
Help!!!....Need solution for slippery seat
Does anyone know of any good practical solution for a slippery seat?
Suddenly, the seat of my pre-gen has become very slippery in combination with my new textile (Maxdura) over-pants. No, I don't hang-off, so I am perfectly happy seated in line with the bike and don't need to slide over the seat. The slippery thing happens during moderate to hard braking, even when I keep gripping the tank with my knees. Flexible self-adhesive anti-slip tape has been the first solution that has came to my mind, but I don't know where to find such tape or if it would work in my case. Thanks in advance
__________________________________________________
Motofool .................................Never ride faster than your guardian angel can fly "Mankind is composed of two sorts of men — those who love and create, and those who hate and destroy. Love is the bond between men, the way to teach and the center of the world." - José Martí |
|
April 24th, 2013, 03:16 PM | #2 |
Bass Master General
|
I've used this stuff in the yacht for years, it's great for puttng in cupboards and draws to stop stuff sliding about.
Between your bum and a seat it'd stick like... Yes http://www.practicalsurfaceware.com/...placemats.html |
|
April 24th, 2013, 03:24 PM | #3 |
ninjette.org sage
Name: Matt
Location: San Diego, CA
Join Date: May 2012 Motorcycle(s): 2007 Triumph Bonneville; 2008 Ninja 250r (trackbike) Posts: 748
|
See if HT Moto will make a seat pad or replacement you can stick on in replacement for your seat pad and upholstery
__________________________________________________
*CVMA #312*SoCal Trackdays*BigHeadz Racing*Motion Pro*Factory Effex*Leatt Brace* Racetech *Bell * Woodcraft CFM*Vortex*Hotbodies*Surface Sun Systems*Braking*LiveWire Energy*Freegun Underwear |
|
April 24th, 2013, 03:29 PM | #5 |
Jigglin' your Jiglets
Name: Sean
Location: San Jose, Ca
Join Date: Jun 2011 Motorcycle(s): 2009 K1300S, 2013 Ninja 300, 2011 Ninja 250R, Faster than Unregistered's ninjette Posts: Too much.
Blog Entries: 1
MOTM - Apr '13
|
Tank grips and squeeze with your knees!
__________________________________________________
If the Ninja 250 doesn't have enough power for you, then you don't know how to ride it. AFM #676 Supersports are for n00bs |
1 out of 1 members found this post helpful. |
April 26th, 2013, 11:54 AM | #6 |
B-Town Ninja
Name: Nathan
Location: Bloomington, IN
Join Date: Feb 2011 Motorcycle(s): Black 2013 Ninja ZX6R ABS Posts: 609
Blog Entries: 3
|
I've seen individuals put tank grip pads on their seats as well as the tank. Rubberized anti-slip tape is probably a cheaper option as well (quick example: http://www.amazon.com/ISC-Jessup-Rub...ip+rubber+tape )
Tank grip (on the tank) alone probably won't help that much as I'm assuming if you aren't leaning off, you're looking for a more comfortable ride.
__________________________________________________
Downgraded to a 2013 636. Previous owner of a 2010 250r --------------------------------- My moto-vlog YouTube channel http://www.youtube.com/bloomingtonninja |
|
April 26th, 2013, 11:59 AM | #7 |
troublemaker
Name: Olly
Location: Seattle, WA
Join Date: Feb 2013 Motorcycle(s): 2012 FZR6R Raven Posts: 92
|
Stop waxing it
|
|
April 26th, 2013, 12:10 PM | #8 |
Daily Ninjette rider
Name: Hernan
Location: Florida
Join Date: Mar 2011 Motorcycle(s): 2007 Ninja 250 Posts: A lot.
MOTY - 2016, MOTM - Dec '12, Jan '14, Jan '15, May '16
|
Thank you all !!!
The problem is not the seat or the grips of the tank but the texture of the new fabric, which is really slippery. Not problem at all with my other nylon over-pant or with jeans.
__________________________________________________
Motofool .................................Never ride faster than your guardian angel can fly "Mankind is composed of two sorts of men — those who love and create, and those who hate and destroy. Love is the bond between men, the way to teach and the center of the world." - José Martí |
|
April 26th, 2013, 12:15 PM | #9 |
ninjette.org member
Name: Carlos
Location: Puerto Rico
Join Date: Jan 2013 Motorcycle(s): Ninja 300R Posts: 181
|
apply velcro to the seat and ur pants, win?
|
|
April 26th, 2013, 12:59 PM | #10 |
Lays er down
Name: Michael
Location: Maryland
Join Date: Apr 2012 Motorcycle(s): 2008 Lime green Ninja 250R Posts: A lot.
|
Someone mentioned in another thread that he was talking to a guy that put grip tape (for skateboards) on his seat
|
|
April 26th, 2013, 03:05 PM | #11 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
I vote for tank grip pads and squeeze with the knees.
|
|
April 27th, 2013, 05:10 AM | #12 | |
Daily Ninjette rider
Name: Hernan
Location: Florida
Join Date: Mar 2011 Motorcycle(s): 2007 Ninja 250 Posts: A lot.
MOTY - 2016, MOTM - Dec '12, Jan '14, Jan '15, May '16
|
Quote:
I will check that option and see how flexible that tape is. It doesn't work, the material at the knees also slips badly. I feel like a boiled egg on flat porcelain dish
__________________________________________________
Motofool .................................Never ride faster than your guardian angel can fly "Mankind is composed of two sorts of men — those who love and create, and those who hate and destroy. Love is the bond between men, the way to teach and the center of the world." - José Martí |
|
|
April 27th, 2013, 08:46 AM | #13 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
The knees slip, even with super rubberized grip pads??? What are those things made of, Teflon??
|
|
April 27th, 2013, 08:58 AM | #14 |
Daily Ninjette rider
Name: Hernan
Location: Florida
Join Date: Mar 2011 Motorcycle(s): 2007 Ninja 250 Posts: A lot.
MOTY - 2016, MOTM - Dec '12, Jan '14, Jan '15, May '16
|
__________________________________________________
Motofool .................................Never ride faster than your guardian angel can fly "Mankind is composed of two sorts of men — those who love and create, and those who hate and destroy. Love is the bond between men, the way to teach and the center of the world." - José Martí |
|
April 28th, 2013, 10:44 AM | #15 |
ninjette.org guru
Name: Robbie
Location: Sacramento
Join Date: Jan 2013 Motorcycle(s): 03' Ninja 250ex Posts: 333
|
Skate deck tape will ruin any gear/pants it's in contact with...It acts as a coarse sandpaper!
You can clean the seat with a good vinyl cleaner...that may help make it a bit tackier from my experience. Look into getting a gripper seat material like what I used for MX bikes. Check fabric stores or online and recover yourself or have an apolstery shop do it for you..it should'nt cost too much. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Leather suit- slippery on seat | cj_816 | Motorcycle Gear | 9 | June 2nd, 2014 08:07 PM |
Slippery leaves are slippery | lognaturel | !%@*#$%!)@#&!%@ I crashed! | 24 | July 31st, 2011 08:39 AM |
Fog and slippery roads | Rosie | General Motorcycling Discussion | 14 | September 3rd, 2010 07:33 PM |
Slippery grips glue??? | Kitdog | 2008 - 2012 Ninja 250R Farkles | 10 | July 24th, 2010 05:59 AM |
considering this rear seat storage solution. FastPack by the Cycle Guys | shift_6 | 2008 - 2012 Ninja 250R Farkles | 15 | July 26th, 2009 05:29 PM |
|
|