March 19th, 2012, 08:28 PM | #1 |
ninjette.org sage
Name: Abhijit
Location: San Francisco
Join Date: Nov 2011 Motorcycle(s): Many Two Wheels .. Posts: 611
|
Hotbodies Race Bodywork interference with Woodcraft handlebars
I think i saw this posted somewhere. But, folks using Woodcraft handlebars, do you notice this as well? At the stop, the oem brake lever interferes at least 2 mm. Plan to grind off the corner a bit.
The fitment of the bodywork is not that great. Their outlined mount positions do no align up, specially the tail is way out of position.
__________________________________________________
[ex-AFM #828 | SMUSA #828 | Sponsors : MotionPro | LeoVince | Insurrection Racing Gloves | QstarZ Laptimers + OEM Parts @ 30-40% OFF : Harry @ 1-877-437-1631,17 harry@hondaeasttoledo.com |
|
March 19th, 2012, 09:01 PM | #2 |
ninjette.org guru
Name: Paul
Location: Midwest
Join Date: Oct 2011 Motorcycle(s): 1999 Kawasaki ZRX1100, 2006 Yamaha R1, 2006 Kawasaki ZZR600, 2009 Kawasaki Ninja 250R, 2017 Kawasaki Z900 Posts: 320
|
I haven't put the bodywork back on with the woodcrafts but I agree that the fitment wasn't great. I spent a lot of time mocking it up and had to grind the belly pan a bit for the exhaust and left rearset to clear.
|
|
March 20th, 2012, 12:29 AM | #3 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
Uhh... I thought the Woodcraft bars still required you to align the bars. It looks like you could sweep them back and tilt the controls forward to gain clearance with no fairing modification. Also, keep in mind that you don't steer a bike like a bicycle except when walking it so you should not need to be able to reach full lock to lock with clearance for your hands on them.
|
|
March 21st, 2012, 09:06 AM | #4 |
la pussy gata
Name: kit
Location: xx
Join Date: Jan 2011 Motorcycle(s): big wheel Posts: 540
|
I have this exact same setup and tilted the controls a little bit and mine do not touch and full lock turning left or right. I do have the risers on mine.
|
|
March 21st, 2012, 09:19 AM | #5 |
ninjette.org sage
Name: Abhijit
Location: San Francisco
Join Date: Nov 2011 Motorcycle(s): Many Two Wheels .. Posts: 611
|
I see you raised the forks. (its kind of sitting flush with the triple). That will give some room. Also, can you measure the ear width. (ie where the hotbodies sticker is on the windscreen and to the top screw). From the picture it looks like your front cownling ear is smaller in width than mine.
Ohh - you have a different brake setup too (reservoir, master, lever, perch (?)) ?? Thanks a lot for checking though.
__________________________________________________
[ex-AFM #828 | SMUSA #828 | Sponsors : MotionPro | LeoVince | Insurrection Racing Gloves | QstarZ Laptimers + OEM Parts @ 30-40% OFF : Harry @ 1-877-437-1631,17 harry@hondaeasttoledo.com |
|
March 21st, 2012, 09:24 AM | #6 |
la pussy gata
Name: kit
Location: xx
Join Date: Jan 2011 Motorcycle(s): big wheel Posts: 540
|
Does this pic help? If not i'll measure it when I get home.
|
|
March 21st, 2012, 09:27 AM | #7 |
ninjette.org sage
Name: Abhijit
Location: San Francisco
Join Date: Nov 2011 Motorcycle(s): Many Two Wheels .. Posts: 611
|
Thanks , that would be great. And, a full left locked on pic to indicate how close the brake side is, would be great
__________________________________________________
[ex-AFM #828 | SMUSA #828 | Sponsors : MotionPro | LeoVince | Insurrection Racing Gloves | QstarZ Laptimers + OEM Parts @ 30-40% OFF : Harry @ 1-877-437-1631,17 harry@hondaeasttoledo.com |
|
March 21st, 2012, 09:27 AM | #8 |
ninjette.org sage
Name: Abhijit
Location: San Francisco
Join Date: Nov 2011 Motorcycle(s): Many Two Wheels .. Posts: 611
|
Thanks , that would be great. And, a full left locked on pic to indicate how close the brake side is, would be great
__________________________________________________
[ex-AFM #828 | SMUSA #828 | Sponsors : MotionPro | LeoVince | Insurrection Racing Gloves | QstarZ Laptimers + OEM Parts @ 30-40% OFF : Harry @ 1-877-437-1631,17 harry@hondaeasttoledo.com |
|
March 21st, 2012, 06:36 PM | #9 |
la pussy gata
Name: kit
Location: xx
Join Date: Jan 2011 Motorcycle(s): big wheel Posts: 540
|
Measuring
Full left turn lock And a vid that hopefully works and will help. http://smg.photobucket.com/albums/v6...=VIDEO0016.mp4 |
|
March 21st, 2012, 06:40 PM | #10 |
ninjette.org sage
Name: Abhijit
Location: San Francisco
Join Date: Nov 2011 Motorcycle(s): Many Two Wheels .. Posts: 611
|
^ Thanks a lot. That helps. Let me see what i can do.
__________________________________________________
[ex-AFM #828 | SMUSA #828 | Sponsors : MotionPro | LeoVince | Insurrection Racing Gloves | QstarZ Laptimers + OEM Parts @ 30-40% OFF : Harry @ 1-877-437-1631,17 harry@hondaeasttoledo.com |
|
March 23rd, 2012, 07:17 AM | #11 |
Pimpin
Name: Richard
Location: Ninja 250 Whorehouse
Join Date: Nov 2008 Motorcycle(s): Bunch of em Posts: 973
|
Race bodywork will never be just like OEM bodywork. 95% of racer's will have to get the dremel out and do some hacking to get them to fit.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
hotbodies 250 RACE bodywork (08-12) | alex.s | Motorcycle-related | 9 | July 9th, 2013 06:19 PM |
I can't adjust my Woodcraft Clipons (handlebars) | walty87 | 2008 - 2012 Ninja 250R Tech Talk | 16 | August 29th, 2012 07:43 AM |
Rashed Hotbodies race bodywork | RaceBikeRentals | Motorcycle-related | 23 | February 25th, 2012 01:33 PM |
2 for 1 Hotbodies race bodywork sale | Rexbo | Motorcycle-related | 10 | February 1st, 2011 05:12 PM |
|
|