massacremasses NINJA EVOLUTION

massacremasses · December 21st, 2011, 07:55 AM

I decided Id make a thread about the upcoming evolution of my little ninja.

Things that are DONE

1. paint (jet black)
2. powder (fluorescent green)
3. green tank pad (I GOT IT FOR $1 eff yeah!)
4. frame sliders
5. proton flushmounts that @ForceofWill gave me

6. Dan Moto slip on
7. OEM seat cowl

Things that will be coming

1.Decals that match my powder (maybe on the fence about it now)
2. adjustable shorty levers (black and green)
3. Green LED lighting kit. (I have some from ebay right now but I think ill use the kit and wire the ebay ones into it. I want the remote and stuff and its cheaper/easier buying it all in the kit.)
4. CustomLED integrated rear light (waiting on it to arrive!)

Current (still some work to go!)

before

good side

before the fender eliminator

ForceofWill · December 21st, 2011, 08:20 AM

Lol, should be a cool bike. The Protons are yours, just PM me your address.

Alex · December 21st, 2011, 08:50 AM

Would you want a build thread in the pics section, or the tech section? Depending on the focus, it would probably work in either, but I wonder if General is really the right spot for it?

massacremasses · December 21st, 2011, 09:25 AM

Quote:

Originally Posted by ForceofWill

Lol, should be a cool bike. The Protons are yours, just PM me your address.

SAWEET!!! Thanks again!!

Quote:

Originally Posted by Alex

Would you want a build thread in the pics section, or the tech section? Depending on the focus, it would probably work in either, but I wonder if General is really the right spot for it?

Not sure? And yeah sorry I wasnt sure where to put it. There will be pictures So I suppose in the picture section? Its not really that technical as the mods will be purely cosmetic.

So I guess pics is fine. But I better get some pics in to make it worthy of a picture spot

Cazper · December 21st, 2011, 10:00 AM

Looking forward to keeping up with your build thread... I'm interested in your powder coat projects

massacremasses · December 21st, 2011, 10:04 AM

The biggest thing with powder coating the rims is the wheel weight thing... Im gonna have to figure out how to get those one there without them looking gross and out of place. Is there anyones that I can get that are not visible? does anyone know?

cliff0529 · December 21st, 2011, 01:27 PM

Quote:

Originally Posted by massacremasses

The biggest thing with powder coating the rims is the wheel weight thing... Im gonna have to figure out how to get those one there without them looking gross and out of place. Is there anyones that I can get that are not visible? does anyone know?

Get the factory ones that clip to the "spine" in the middle of the rim and then paint them to match the rim. They'd stand out a little less than the normal stick on ones, or I suppose you could paint the stick on kind too.

Just an idea.

massacremasses · December 21st, 2011, 01:37 PM

Quote:

Originally Posted by cliff0529

Get the factory ones that clip to the "spine" in the middle of the rim and then paint them to match the rim. They'd stand out a little less than the normal stick on ones, or I suppose you could paint the stick on kind too.

Just an idea.

problem is its a powder... So I wonder if I could powder coat them before I have the shop but the tires back on and balance them and such...

Trailerboy531 · December 21st, 2011, 01:45 PM

Look in to Dyna beads. I believe they go inside the tire?

KawiKid860 · December 21st, 2011, 01:53 PM

I recommend dyna beads. Some swear by em, some hate em, I've got them in my bike and it rides fine although I've yet to do a good test on them (think highway where its smooth, + very high rates of speed)

massacremasses · December 21st, 2011, 01:54 PM

boom thats what I was looking for but I couldnt remember the name of them... Ill have to ask about them. Im prolly gonna have to take it to an actual motorcycle store to get done... shoot I should really just look into getting some new tires while Im at it.

NDspd · December 21st, 2011, 02:28 PM

Sounds like a great little project to take on. I really want to get a Dan Moto exhaust, but I'm unsure what to do with it once I get it.

Keep up updated man!!

alex.s · December 21st, 2011, 03:41 PM

what do ninjettes evolve into? ninjarasaur? ninjazard?

no wait, i just looked it up... its ninjask: http://bulbapedia.bulbagarden.net/wi...ok%C3%A9mon%29

kyrider · December 22nd, 2011, 08:48 PM

Spinners?

massacremasses · December 22nd, 2011, 09:43 PM

yes. chrome ones.

Alex · December 23rd, 2011, 10:52 AM

Quote:

Originally Posted by massacremasses

So I guess pics is fine. But I better get some pics in to make it worthy of a picture spot

Pics it is.

No problems moving it elsewhere again if it evolves differently...

massacremasses · January 1st, 2012, 01:26 AM

stripped her today. Will see if I can snag some sand paper and start doing some light prep tomorrow. Not sure if I wanna take the stickers off or what I want to do about those...

Took a little while to get everything off... as Ive never done it before. Had my little cousin help out since hes not very automotive savvy to teach him stuff (even though im clueless here too lol)

massacremasses · January 1st, 2012, 01:29 AM

also my new bar ends, frame sliders, and proton FM will be going on and I think im going to powder coat the wheels while its out of commission anyways... although that may be a daunting task to put it all back together... as I have a terrible memory.

Oh and I think ill be getting a danmoto slip on to finish her up.

OHHHHHHHHHHHHh and some had the great idea of powder coating my passenger pegs the same color as my wheels! idk why I didnt think of that?! but yeah Ill be doing that as well

Slono · January 1st, 2012, 02:33 AM

Quote:

Originally Posted by massacremasses

also my new bar ends, frame sliders, and proton FM will be going on and I think im going to powder coat the wheels while its out of commission anyways... although that may be a daunting task to put it all back together... as I have a terrible memory.

Oh and I think ill be getting a danmoto slip on to finish her up.

OHHHHHHHHHHHHh and some had the great idea of powder coating my passenger pegs the same color as my wheels! idk why I didnt think of that?! but yeah Ill be doing that as well

Its gonna be a sweet ride, I'm looking forward to the end result.

kevheads · January 1st, 2012, 06:18 AM

Damn, you even removed the kitchen sink

massacremasses · January 1st, 2012, 01:40 PM

thanks guys.

I went to the store to pick up some sand paper today. Unfortunately I will not be able to work on it today. :/

Ive gotta work on house improvement stuff today. Gotta keep the wife happy. But yeah my cousin was making fun on the kitchen sink in the picture too, haha. I do all the work at my grandpas house since he has the space, and the tools, but I have to put up with his random junk everywhere. lol

massacremasses · January 2nd, 2012, 05:29 PM

just ordered a danmoto slipon with the removable baffle. should be here in a few weeks.

massacremasses · January 7th, 2012, 11:37 AM

wet sanded yesterday, and will hopefully finish up today minus the right front fender.

also took of the muffler and passenger pegs.

put the passenger pegs, and bolts in my car to prep and powdercoat this next week sometime...

massacremasses · January 12th, 2012, 08:26 PM

a really bad picture of a piece I powder coated with my green. It looks really dull in this crappy pic. Im going to do my passenger pegs tomorrow so Ill put that up this weekend.

gilmorec61 · January 12th, 2012, 09:06 PM

Quote:

Originally Posted by massacremasses

just ordered a danmoto slipon with the removable baffle. should be here in a few weeks.

How much was it?

massacremasses · January 12th, 2012, 09:12 PM

Quote:

Originally Posted by gilmorec61

How much was it?

CHEAP!!!!

they rip you for shipping but still it only comes out to a like $130 and some change. looks really good too for some Chinese ****!

It also only took a week to get here. Everyone says they forget the baffle if you order it (its like $6 extra) but I wrote in the part you can write a note "PLEASE DO NOT FORGET MY REMOVABLE BAFFLE" lol

gilmorec61 · January 12th, 2012, 09:24 PM

Hmmmm thats awesome, I might have to think about saving up for one of those...that is if i am able to get that a$$ end of that frame bent back to normal and keep it.

gilmorec61 · January 12th, 2012, 09:26 PM

Oh, and you dont need a jet kit on it do you? Just shim the needles as i already did? Maybe add another washer?

massacremasses · January 12th, 2012, 09:26 PM

if its only the back you have a good chance... I just hope the frame isnt compromised. :/

gilmorec61 · January 12th, 2012, 09:29 PM

Quote:

Originally Posted by massacremasses

if its only the back you have a good chance... I just hope the frame isnt compromised. :/

Same here man, same here.

massacremasses · January 13th, 2012, 10:37 PM

passenger pegs

bad news as well... I found out today that my "universal" bar ends are not so universal. They are totally the wrong type and dont screw in and are just all wrong? I dont know if im a dummy and im missing something, but they didnt seem to work at all...

massacremasses · January 14th, 2012, 09:54 PM

I figured the bar end thing out.. but still not sure if I like the new ones or not, I realized I need to get the piece with the threads out to stick the universal one in... BUT also I made some progress on my body work

my 85 year old grandpa is a champ and is actually the one who shot the primer. I asked to do it but he said "Ill do it, I dont know how to show you" lol

Its cold, bondo drying under the heat lamp

coat of primer

letting it dry in the sun...

thew some spot putty in a few places after we were done. Gonna we sand it down tomorrow or monday and prolly have my uncle shoot it in the paint booth on friday if hes up to it

choneofakind · January 15th, 2012, 11:15 AM

Quote:

Originally Posted by massacremasses

passenger pegs

were those PC or paint? Is that the color that you're going to be doing your bolts in also?

Bodywork looks good so far

Pictures of the bar ends? I have WC bars and want weighted bars. I can't get this method to work the one time that I tried it. Wrong diameter hose...

massacremasses · January 15th, 2012, 07:14 PM

Yes thats powder. I decided against doing the bolts... a lot of work and it makes me nervous I wont be able to get the allen wrenches in it when I do it because there is a lot of material in there...

massacremasses · January 15th, 2012, 07:17 PM

they would work for for you. They would work for me if I wanna deal with them.. I havent decided which way im gonna go yet. They are a lot smaller then the stock ones..

SlowBoyRacing · January 16th, 2012, 07:48 AM

Looks like it is coming along

massacremasses · January 18th, 2012, 08:02 AM

thanks, slower than I would like though :/

I tried to start wet sanding on monday, but its just to damn cold outside when I get off work, I cant feel my hands so Im probably just messing it up. So Ill have to wait until this weekend...

so no paint this weekend unfortunately

super bummed but oh well its suppose to rain next week anyways. I want to get it painted so I can start putting things back together... I still need to shim the needles and put the new slip on, on.

massacremasses · January 21st, 2012, 07:49 PM

pegs look SOOOOOOOOOOOOOOOOOOOO SEXY on the bike. I seriously CANNOT wait to go the rims. THe picture sucks but its better than nothing... RIGHT?!!!

btw has anyone used passenger pegs for their own pegs? how are they? Im thinking about using some but then seem kinda slick :/

ForceofWill · January 21st, 2012, 07:53 PM

Quote:

Originally Posted by massacremasses

pegs look SOOOOOOOOOOOOOOOOOOOO SEXY on the bike. I seriously CANNOT wait to go the rims. THe picture sucks but its better than nothing... RIGHT?!!!

btw has anyone used passenger pegs for their own pegs? how are they? Im thinking about using some but then seem kinda slick :/

Pegs look good man. If I had kept mine I woulda PC'ed em too. Now just get rid of those fugly stock turn signals in the back and get yourself a nice LED tail.

massacremasses · January 21st, 2012, 08:00 PM

Quote:

Originally Posted by ForceofWill

Pegs look good man. If I had kept mine I woulda PC'ed em too. Now just get rid of those fugly stock turn signals in the back and get yourself a nice LED tail.

yeah I plan on the little guy going for rides with me so I need to keep em on.

BUT I KNOW RIGHT?! I hate the stock turn signals. When I get the intigrated one Im debating weather I will just take those off and see how long I go without getting a ticket or not... lol

I want this though with the flush mount turn signals but its just so much $$$ for all of it

December 21st, 2011, 07:55 AM	#1
massacremasses Avid Kitteh Poster Name: Justin Location: Norcal Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.	massacremasses NINJA EVOLUTION I decided Id make a thread about the upcoming evolution of my little ninja. Things that are DONE 1. paint (jet black) 2. powder (fluorescent green) 3. green tank pad (I GOT IT FOR $1 eff yeah!) 4. frame sliders 5. proton flushmounts that @ForceofWill gave me 6. Dan Moto slip on 7. OEM seat cowl Things that will be coming 1.Decals that match my powder (maybe on the fence about it now) 2. adjustable shorty levers (black and green) 3. Green LED lighting kit. (I have some from ebay right now but I think ill use the kit and wire the ebay ones into it. I want the remote and stuff and its cheaper/easier buying it all in the kit.) 4. CustomLED integrated rear light (waiting on it to arrive!) Current (still some work to go!) before good side before the fender eliminator __________________________________________________ I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ Last futzed with by massacremasses; February 12th, 2012 at 10:25 PM. Reason: pics

December 21st, 2011, 08:50 AM	#3
Alex ninjette.org dude Name: 1 guess :-) Location: SF Bay Area Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much. Blog Entries: 7	Would you want a build thread in the pics section, or the tech section? Depending on the focus, it would probably work in either, but I wonder if General is really the right spot for it? __________________________________________________ Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered)

December 21st, 2011, 10:00 AM	#5
Cazper ninjaholic Name: Dustin Location: Oceanside, CA Join Date: Jun 2010 Motorcycle(s): 09' SE 250R (sold), 03' ZX-6R, 99' XL1200C SP Posts: A lot. Blog Entries: 3	Looking forward to keeping up with your build thread... I'm interested in your powder coat projects __________________________________________________ 09' SE Ninja 250R $2,547.83 worth of mods installed... come on Unregistered, you know you want to know what? Check my Blog "Modification List"

December 21st, 2011, 10:04 AM	#6
massacremasses Avid Kitteh Poster Name: Justin Location: Norcal Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.	The biggest thing with powder coating the rims is the wheel weight thing... Im gonna have to figure out how to get those one there without them looking gross and out of place. Is there anyones that I can get that are not visible? does anyone know? __________________________________________________ I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/

December 21st, 2011, 01:54 PM	#11
massacremasses Avid Kitteh Poster Name: Justin Location: Norcal Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.	boom thats what I was looking for but I couldnt remember the name of them... Ill have to ask about them. Im prolly gonna have to take it to an actual motorcycle store to get done... shoot I should really just look into getting some new tires while Im at it. __________________________________________________ I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/

December 21st, 2011, 08:20 AM	#2
ForceofWill Blind 250 Loving Whore Name: Tom Location: Chesapeake, VA Join Date: May 2011 Motorcycle(s): 2008 250R, 02 FZ1, '20 Fat Bob 114 Posts: A lot.	Lol, should be a cool bike. The Protons are yours, just PM me your address.

December 21st, 2011, 01:45 PM	#9
Trailerboy531 Gear crash test dummy Name: Max Location: South Bay (So. Cal) Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.	Look in to Dyna beads. I believe they go inside the tire?

December 21st, 2011, 01:53 PM	#10
KawiKid860 ninjette.org certified postwhore Name: Murphey Location: Eastern Washington Join Date: Apr 2011 Motorcycle(s): 2002 Honda 919, 2004 Ninja 500R NAKED Posts: A lot.	I recommend dyna beads. Some swear by em, some hate em, I've got them in my bike and it rides fine although I've yet to do a good test on them (think highway where its smooth, + very high rates of speed)

December 21st, 2011, 02:28 PM	#12
NDspd 1/4 English, 3/4 Kick Ass Name: Jeremy Location: Dayton, OH Join Date: Sep 2011 Motorcycle(s): 2002 Triumph Speed Triple 955i, '05 Suzuki SV650S(retired), '11 Ninja 250R(sold) Posts: A lot.	Sounds like a great little project to take on. I really want to get a Dan Moto exhaust, but I'm unsure what to do with it once I get it. Keep up updated man!!

December 21st, 2011, 03:41 PM	#13
alex.s wat Name: wat Location: tustin/long beach Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much. Blog Entries: 5 MOTM - Oct '12, Feb '14	what do ninjettes evolve into? ninjarasaur? ninjazard? no wait, i just looked it up... its ninjask: http://bulbapedia.bulbagarden.net/wi...ok%C3%A9mon%29 __________________________________________________

December 22nd, 2011, 08:48 PM	#14
kyrider ninjette.org certified postwhore Name: Bobbert Location: Russell Springs, KY Join Date: Jul 2011 Motorcycle(s): 2006 Ninja 250R Posts: A lot.	Spinners?

December 22nd, 2011, 09:43 PM	#15
massacremasses Avid Kitteh Poster Name: Justin Location: Norcal Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.	yes. chrome ones. __________________________________________________ I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/

January 1st, 2012, 01:26 AM	#17
massacremasses Avid Kitteh Poster Name: Justin Location: Norcal Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.	stripped her today. Will see if I can snag some sand paper and start doing some light prep tomorrow. Not sure if I wanna take the stickers off or what I want to do about those... Took a little while to get everything off... as Ive never done it before. Had my little cousin help out since hes not very automotive savvy to teach him stuff (even though im clueless here too lol) __________________________________________________ I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/

January 1st, 2012, 01:29 AM	#18
massacremasses Avid Kitteh Poster Name: Justin Location: Norcal Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.	also my new bar ends, frame sliders, and proton FM will be going on and I think im going to powder coat the wheels while its out of commission anyways... although that may be a daunting task to put it all back together... as I have a terrible memory. Oh and I think ill be getting a danmoto slip on to finish her up. OHHHHHHHHHHHHh and some had the great idea of powder coating my passenger pegs the same color as my wheels! idk why I didnt think of that?! but yeah Ill be doing that as well __________________________________________________ I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/

January 1st, 2012, 06:18 AM	#20
kevheads ninjette.org guru Name: Kevin Location: central Illinois Join Date: Apr 2011 Motorcycle(s): 2011 Green 250R Posts: 346	Damn, you even removed the kitchen sink

January 1st, 2012, 01:40 PM	#21
massacremasses Avid Kitteh Poster Name: Justin Location: Norcal Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.	thanks guys. I went to the store to pick up some sand paper today. Unfortunately I will not be able to work on it today. :/ Ive gotta work on house improvement stuff today. Gotta keep the wife happy. But yeah my cousin was making fun on the kitchen sink in the picture too, haha. I do all the work at my grandpas house since he has the space, and the tools, but I have to put up with his random junk everywhere. lol __________________________________________________ I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/

January 2nd, 2012, 05:29 PM	#22
massacremasses Avid Kitteh Poster Name: Justin Location: Norcal Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.	just ordered a danmoto slipon with the removable baffle. should be here in a few weeks. __________________________________________________ I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/

January 7th, 2012, 11:37 AM	#23
massacremasses Avid Kitteh Poster Name: Justin Location: Norcal Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.	wet sanded yesterday, and will hopefully finish up today minus the right front fender. also took of the muffler and passenger pegs. put the passenger pegs, and bolts in my car to prep and powdercoat this next week sometime... __________________________________________________ I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/

January 12th, 2012, 08:26 PM	#24
massacremasses Avid Kitteh Poster Name: Justin Location: Norcal Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.	a really bad picture of a piece I powder coated with my green. It looks really dull in this crappy pic. Im going to do my passenger pegs tomorrow so Ill put that up this weekend. __________________________________________________ I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/

January 12th, 2012, 09:24 PM	#27
gilmorec61 ninjette.org guru Name: Chris Location: Newnan, G.A. Join Date: Jan 2012 Motorcycle(s): 2008 Kawasaki Ninja 250R Posts: 347	Hmmmm thats awesome, I might have to think about saving up for one of those...that is if i am able to get that a$$ end of that frame bent back to normal and keep it.

January 12th, 2012, 09:26 PM	#28
gilmorec61 ninjette.org guru Name: Chris Location: Newnan, G.A. Join Date: Jan 2012 Motorcycle(s): 2008 Kawasaki Ninja 250R Posts: 347	Oh, and you dont need a jet kit on it do you? Just shim the needles as i already did? Maybe add another washer?

January 13th, 2012, 10:37 PM	#31
massacremasses Avid Kitteh Poster Name: Justin Location: Norcal Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.	passenger pegs bad news as well... I found out today that my "universal" bar ends are not so universal. They are totally the wrong type and dont screw in and are just all wrong? I dont know if im a dummy and im missing something, but they didnt seem to work at all... __________________________________________________ I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/

January 14th, 2012, 09:54 PM	#32
massacremasses Avid Kitteh Poster Name: Justin Location: Norcal Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.	I figured the bar end thing out.. but still not sure if I like the new ones or not, I realized I need to get the piece with the threads out to stick the universal one in... BUT also I made some progress on my body work my 85 year old grandpa is a champ and is actually the one who shot the primer. I asked to do it but he said "Ill do it, I dont know how to show you" lol Its cold, bondo drying under the heat lamp coat of primer letting it dry in the sun... thew some spot putty in a few places after we were done. Gonna we sand it down tomorrow or monday and prolly have my uncle shoot it in the paint booth on friday if hes up to it __________________________________________________ I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/

January 15th, 2012, 07:14 PM	#34
massacremasses Avid Kitteh Poster Name: Justin Location: Norcal Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.	Yes thats powder. I decided against doing the bolts... a lot of work and it makes me nervous I wont be able to get the allen wrenches in it when I do it because there is a lot of material in there... __________________________________________________ I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/

January 15th, 2012, 07:17 PM	#35
massacremasses Avid Kitteh Poster Name: Justin Location: Norcal Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.	they would work for for you. They would work for me if I wanna deal with them.. I havent decided which way im gonna go yet. They are a lot smaller then the stock ones.. __________________________________________________ I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/

January 16th, 2012, 07:48 AM	#36
SlowBoyRacing ninjette.org member Name: Mani Location: NY Join Date: Dec 2011 Motorcycle(s): ZX6-R and etc. Posts: 137	Looks like it is coming along

January 18th, 2012, 08:02 AM	#37
massacremasses Avid Kitteh Poster Name: Justin Location: Norcal Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.	thanks, slower than I would like though :/ I tried to start wet sanding on monday, but its just to damn cold outside when I get off work, I cant feel my hands so Im probably just messing it up. So Ill have to wait until this weekend... so no paint this weekend unfortunately super bummed but oh well its suppose to rain next week anyways. I want to get it painted so I can start putting things back together... I still need to shim the needles and put the new slip on, on. __________________________________________________ I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/

January 21st, 2012, 07:49 PM	#38
massacremasses Avid Kitteh Poster Name: Justin Location: Norcal Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.	pegs look SOOOOOOOOOOOOOOOOOOOO SEXY on the bike. I seriously CANNOT wait to go the rims. THe picture sucks but its better than nothing... RIGHT?!!! btw has anyone used passenger pegs for their own pegs? how are they? Im thinking about using some but then seem kinda slick :/ __________________________________________________ I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My Ninja 250R Evolution	Roda_BR	Pictures	7	January 11th, 2014 09:38 PM
massacremasses go pro adventures	massacremasses	Videos	14	March 13th, 2012 02:09 PM
My ride with "massacremasses"	AlanDog	Ride Reports	32	February 28th, 2012 11:56 PM
Evolution of the Ninja	Nemy	Pictures	17	April 7th, 2009 11:32 AM