June 8th, 2015, 12:04 PM | #1 |
ninjette.org member
Name: Oleg
Location: Seattle WA
Join Date: Aug 2013 Motorcycle(s): CRF450X, CRF250R/SM, Husky 630 SMS, Ninja 250R Posts: 144
|
Do new gen foot pegs fit on pregen?
Really quick question. I know rearsets fit, but are just the pegs same too? Don't need to swap the entire assembly, but dealing with a broken foot peg.
Thanks! |
|
June 8th, 2015, 01:39 PM | #2 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
Yes. I have some folding ones from eBay that were made to fit both. They fit the newgen a bit tight. If anything, the pivot pin that goes through the mount and the peg was slightly thicker on the newgen so it should be an easier fit on the older bike.
I think most Kawasaki bikes accept each other's pegs. You can even move your passenger pegs to the front if you want even though they are very different. |
1 out of 1 members found this post helpful. |
June 8th, 2015, 02:04 PM | #3 | |
ninjette.org member
Name: Oleg
Location: Seattle WA
Join Date: Aug 2013 Motorcycle(s): CRF450X, CRF250R/SM, Husky 630 SMS, Ninja 250R Posts: 144
|
Thanks! That helps. I figured they fit...
Quote:
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Swapped New gen forks onto pregen, kept old gen ignition switch. | thumper64 | 1986 - 2007 Ninja 250R Tech Talk | 4 | March 31st, 2014 07:05 PM |
How to raised foot pegs? | caineroad | General Motorcycling Discussion | 4 | November 6th, 2013 03:23 PM |
will a new gen starter fit on a pregen? | deanomyte | 1986 - 2007 Ninja 250R Tech Talk | 2 | November 7th, 2012 05:54 PM |
Do new gen clip ons fit pregen bikes?? | gilmorec61 | 1986 - 2007 Ninja 250R Tech Talk | 37 | November 7th, 2012 10:20 AM |
Front Foot Pegs for the New Gen | dsims321 | 2008 - 2012 Ninja 250R Farkles | 7 | October 11th, 2011 05:13 AM |
|
|