June 24th, 2017, 09:28 AM | #1 |
ninjette.org member
Name: Kyle
Location: Raleigh, NC
Join Date: Jan 2017 Motorcycle(s): 2008 Triumph Speed Triple (Blazing Orange); 2010 Nina 250r (Race Project) Posts: 97
|
Area P Fueler woes
At track and trying to figure this out.
Ordered area P fuel modulator. Put in R77 full exhaust system, that's it for mods. This was confirmed to be in the primary position when it was sent. At the track, still getting exhaust pop at the top of every single gear. This shouldn't be the case if the proper map was loaded should it? There are also dials to tweak due at low, mid and high range. Any experience with these? |
|
June 24th, 2017, 10:35 AM | #2 |
ninjette.org certified postwhore
Name: Al
Location: York, Pa
Join Date: Dec 2012 Motorcycle(s): 2013 Ninja 300..............2008 Ninja 500-sold...2009 Ninja 250-Crashed Posts: Too much.
MOTM - Sep '14
|
@kbryant has some experience with that system
__________________________________________________
Keep calm and ride on -Motofool Never quit on a rainy day -ally99 |
|
June 24th, 2017, 10:42 AM | #3 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
Upshift AND downshift? Does your bike have a quickshifter?
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
June 24th, 2017, 12:17 PM | #4 |
Track Clown
Name: Chris
Location: Kingman, AZ
Join Date: May 2012 Motorcycle(s): '08 250R, 21 MV F3 800, Kawasaki 400 build Posts: A lot.
MOTM - Sep '15
|
Maps will never be perfect, due to a couple of standard variables, elevation and engine, they are a baseline for the exhaust. you may need to tweak a few things here and there.
|
|
February 22nd, 2018, 08:38 AM | #5 |
ninjette.org newbie
Name: Jay
Location: Denver
Join Date: Jul 2017 Motorcycle(s): Ninja 300 Posts: 1
|
You need to block the pair valve to stop the popping. You can do this cheaply by plugging the hose that goes from the airbox to the valve with a marble.
|
|
February 22nd, 2018, 09:13 AM | #6 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
/moved to 300 tech
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Shifting Woes.... | soonerbillz | 1986 - 2007 Ninja 250R Tech Talk | 9 | July 7th, 2014 11:14 AM |
Downshifting woes | RogerPapaMike | 1986 - 2007 Ninja 250R Tech Talk | 14 | April 30th, 2014 10:20 AM |
Woodcraft woes | mikecronis | 2008 - 2012 Ninja 250R Farkles | 12 | January 30th, 2013 05:26 AM |
Jetting Woes... | Jerkson | 2008 - 2012 Ninja 250R Tech Talk | 37 | October 20th, 2010 08:44 PM |
[motorcyclistonline] - Korry Hogan's 250-mph Suzuki Top Fueler - Fast... | Ninjette Newsbot | Motorcycling News | 0 | March 19th, 2009 04:00 PM |
Thread Tools | |
|
|