|
October 23rd, 2011, 10:15 AM
|
#1 |
|
ninjette.org member
Name: Rob
Location: Connecticut
Join Date: May 2011 Motorcycle(s): 2010 Red Ninja 250r Posts: 69
|
Do I need spools for the front forks? 2010 250r
Hey. So I bought the gpi industries bike stands and I got the spools for the back like someone told me to get but I just want to make sure that I don't need to buy some for the front too. There are holes under the forks so I don't know if they are made to fit in there or what.
Please give me your advice. It would be much appreciated. |
|
|
|
October 23rd, 2011, 10:04 PM
|
#2 |
|
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
You need a different stand for the front... either a front fork stand or a triple-tree/head stand. Neither requires spools though the head stand requires an 18mm or smaller sized pin.
|
|
|
|
|
October 23rd, 2011, 11:41 PM
|
#3 |
|
Gear crash test dummy
Name: Max
Location: South Bay (So. Cal)
Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.
|
...Spools....for the front?
 Definitely get the triple tree stand. Also your avatar is the same as user "phr3ak" and it's confusing! |
|
|
|
|
October 24th, 2011, 06:44 AM
|
#4 |
|
ninjette.org member
Name: Rob
Location: Connecticut
Join Date: May 2011 Motorcycle(s): 2010 Red Ninja 250r Posts: 69
|
Hey guys. Yeah, I got the set of stands, so it's a different stand for the front and the back and also have the spools installed for the back already.
Thank you for the information. |
|
|
|
