2001 Ninja 250 Part out

hawker1693 · August 27th, 2013, 08:21 PM

Hey guys I've got an '01 Ninja 250 that has a broken frame and decided the best option for me at the moment is to part it out. So, I've got the whole bike I'll list a few things that are broken to save some questions.

The BAD:
Front upper fairing has a bit of road rash and a couple cracks one about 5-7in long and one right at the bolt. Both fixable if you have the skills.

Front lower fairing (no picture right now) is cracked right in the front above the grille. Also fixable.

Fender? whatever you wanna call it for the front tire is good but has a few scratches.

Left side fairing has a crack in it where the 'knob' click into the 'tab' on the gas tank. also its missing one of the rear 'knobs' otherwise its in good condition.

Right side fairing is in good condition however the two front 'knobs' on the inside are glued on with who knows what kind of glue. Previous owner did it and its strange.

Rear fairing is cracked underneath

Gas tank is dented up pretty bad on both the top and the right side. And punctured cause a dummy not me, put to long of bolts in there!

The front turn signals are not stock, they are crappy aftermarket signals.

Headlight/speedo bracket is junk. However the speedo and headlight are in okay condition.

Handlebars are bent but I believe forks are all good.

The GOOD:
Almost brand new (500 or so miles on it) Pirelli Sport Demon rear tire. 130 90 16.

Decent (but stock) front tire with maybe 25-35% tread left? I'm not sure.

Seat is in great condition! SOLD

Runs good! not sure how other ninjas are but I just had to choke it on start up then ease out on the choke and it purrred. (have to check the mileage)

and as far as other parts on the bike. Just ask.

I'll be adding more pictures in a few min.

verboten1 · August 27th, 2013, 08:34 PM

How much for the headlight/gauge/fairing bracket ( throne the mirrors also bolt to) and the gauge cluster

To 48161

Thanks!

*edit* crap, just saw you said the bracket is crap. Where in MI are you? Maybe I can ride out for some parts. Thanks!

hawker1693 · August 27th, 2013, 08:50 PM

Quote:

Originally Posted by verboten1

How much for the headlight/gauge/fairing bracket ( throne the mirrors also bolt to) and the gauge cluster

To 48161

Thanks!

*edit* crap, just saw you said the bracket is crap. Where in MI are you? Maybe I can ride out for some parts. Thanks!

I am in Decatur, MI. About 2 and a half hours from you I believe.

Sirref · August 27th, 2013, 09:23 PM

man I wish I had money Q_Q I would so jump on the engine and seat to help with my '01 rebuild so I wouldn't have to actually rebuild the engine lol

CaptainPlatypus · August 28th, 2013, 12:07 PM

Definitely interested in the engine, depending on mileage and price.

hawker1693 · August 28th, 2013, 01:13 PM

Quote:

Originally Posted by CaptainPlatypus

Definitely interested in the engine, depending on mileage and price.

17,514 is what the speedo says. But I don't know if that's actual. What can you pay for it just make me an offer.

FrugalNinja250 · August 28th, 2013, 03:23 PM

Man, it's too bad you can't go get the bike over in Delaware, $500 is quite reasonable and between the two you can come up with a pretty decent bike, and recoup some of your costs by selling off the duplicate and left over parts.

http://www.ninjette.org/forums/showthread.php?t=147643

TonyKZ1 · August 29th, 2013, 07:11 PM

Hey, I might be interested in the Pirelli Sport Demon rear tire as mine is getting pretty worn. Really only 500 miles?
Thanks, Tony

hawker1693 · August 30th, 2013, 06:29 PM

Quote:

Originally Posted by TonyKZ1

Hey, I might be interested in the Pirelli Sport Demon rear tire as mine is getting pretty worn. Really only 500 miles?
Thanks, Tony

Yeah, I got the tire a few weeks after I got the bike and had very little chance to ride it before the frame problem :/ So yeah its practically new.

TonyKZ1 · August 31st, 2013, 03:32 PM

Quote:

Originally Posted by hawker1693

Yeah, I got the tire a few weeks after I got the bike and had very little chance to ride it before the frame problem :/ So yeah its practically new.

Wow, that kinda sucked so to speak. So how much are you needing/wanting for the tire? Of course I'd probably need it to shipped to me, too. I'm outside Marble Hill, Mo zip 63764
Thanks, Tony

tommy tuff nuts · September 1st, 2013, 10:00 PM

I need a good working carb for my girlfriends bike she has owned the bike since july and hasnt got to ride it yet the guy we got it from sold us a pos I literally had to rebuild everything and if you could let it go for a reasonable price we would love to have it please p.m. me thanks

hawker1693 · September 3rd, 2013, 01:15 AM

Quote:

Originally Posted by TonyKZ1

Wow, that kinda sucked so to speak. So how much are you needing/wanting for the tire? Of course I'd probably need it to shipped to me, too. I'm outside Marble Hill, Mo zip 63764
Thanks, Tony

I'll let you know... wasn't able to find a welder then ran into a guy today that says he can fix the frame. Soooo parting it out is on hold until I see if it works out.

Quote:

Originally Posted by tommy tuff nuts

I need a good working carb for my girlfriends bike she has owned the bike since july and hasnt got to ride it yet the guy we got it from sold us a pos I literally had to rebuild everything and if you could let it go for a reasonable price we would love to have it please p.m. me thanks

^ I'll let you know if they become available, part out is on hold now...sorry

TonyKZ1 · September 3rd, 2013, 06:15 AM

Here's hoping that you can get it fixed!
Tony

NaMeTaKeN33 · September 5th, 2013, 04:49 PM

Sorry for the late reply, but just got the seat and put it on. Thanks =D

MasterCylinder · September 9th, 2013, 03:57 PM

How much you lookin for the petcock?

tommy tuff nuts · September 10th, 2013, 08:50 AM

$40

eulark · September 11th, 2013, 06:57 AM

How much for the coils and plug wires? Mine are crapping out on me.

hawker1693 · September 12th, 2013, 08:41 PM

Quote:

Originally Posted by TonyKZ1

Wow, that kinda sucked so to speak. So how much are you needing/wanting for the tire? Of course I'd probably need it to shipped to me, too. I'm outside Marble Hill, Mo zip 63764
Thanks, Tony

$100 shipped. Also I'm not sure how to remove a tire really. Never done it before lol so if i need to take it somewhere to get it removed you'd have to pay for that...

Quote:

Originally Posted by tommy tuff nuts

I need a good working carb for my girlfriends bike she has owned the bike since july and hasnt got to ride it yet the guy we got it from sold us a pos I literally had to rebuild everything and if you could let it go for a reasonable price we would love to have it please p.m. me thanks

I'll let the carb go for $95 shipped

Quote:

Originally Posted by MasterCylinder

How much you lookin for the petcock?

$20 shipped

Quote:

Originally Posted by eulark

How much for the coils and plug wires? Mine are crapping out on me.

$38 shipped

tommy tuff nuts · September 12th, 2013, 10:13 PM

I will take that petcock for 20 and might want that carb can you p.m. me a picture of it? and it will be sat before I can buy that petcock from you

hawker1693 · September 12th, 2013, 10:16 PM

Quote:

Originally Posted by tommy tuff nuts

I will take that petcock for 20 and might want that carb can you p.m. me a picture of it? and it will be sat before I can buy that petcock from you

I'll have to take a picture of the carb tomorrow.

tommy tuff nuts · September 12th, 2013, 10:33 PM

Alright thanks

MasterCylinder · September 13th, 2013, 05:22 AM

dag... Tommy can have it. I just bought one on ebay out of impatients. =/

hawker1693 · September 13th, 2013, 05:31 AM

Quote:

Originally Posted by MasterCylinder

dag... Tommy can have it. I just bought one on ebay out of impatients. =/

Sorry man, I was trying to figure out if I was going to keep the essential parts and get it fixed then street fighter it but I ran into an 08 that was too good of a deal.

TonyKZ1 · September 13th, 2013, 05:42 AM

Quote:

Originally Posted by hawker1693

$100 shipped. Also I'm not sure how to remove a tire really. Never done it before lol so if i need to take it somewhere to get it removed you'd have to pay for that...

Yea, nevermind. That's more than it'd be worth in time, trouble, and expense. I just bought a new set of Pirelli Sport Demon tires from AMT and they should be here soon.
Thanks, Tony

agentbad · September 13th, 2013, 07:01 AM

How much for toolkit?

hawker1693 · September 13th, 2013, 06:42 PM

Quote:

Originally Posted by agentbad

How much for toolkit?

$15 shipped?

DJayhawk · September 14th, 2013, 10:11 AM

How much for the rear brake peddle, if its not bent?

I'm also interested in the front bushings that hold the side fairings on.

Battery strap?

Thanks

Moso504 · September 17th, 2013, 01:03 PM

Im looking for the left handlebar to 70119, I dont need the controls tho. Someone knocked my bike over at the grocery and when I found it lying over it had bent the bar. I gotta take the bike to see my dad in Alabama next month so its gotta get fixed!

hawker1693 · September 18th, 2013, 08:18 PM

Quote:

Originally Posted by Moso504

Im looking for the left handlebar to 70119, I dont need the controls tho. Someone knocked my bike over at the grocery and when I found it lying over it had bent the bar. I gotta take the bike to see my dad in Alabama next month so its gotta get fixed!

Quote:

Originally Posted by DJayhawk

How much for the rear brake peddle, if its not bent?

I'm also interested in the front bushings that hold the side fairings on.

Battery strap?

Thanks

Quote:

Originally Posted by tommy tuff nuts

I will take that petcock for 20 and might want that carb can you p.m. me a picture of it? and it will be sat before I can buy that petcock from you

OH MY WORD...I'm feeling like a real pain in the arse..but my brother just bought a bike and apparently I cant continue to part out my bike but rather fix it so we can ride together lol. So...yah sorry for the inconvenience.

Don't hate me please!

I know this is only the second time I've changed my mind.

MaxxVE · September 25th, 2013, 07:01 PM

If you change your mind again let me know. I'll take the cracked frame as long as it's titled still.

hawker1693 · September 25th, 2013, 08:14 PM

Quote:

Originally Posted by MaxxVE

If you change your mind again let me know. I'll take the cracked frame as long as it's titled still.

Haha I know I changed my mind a gazillion times..but I actually dropped it off to be welded so unless something goes horribly wrong I'll be riding it next week.

Obje0110 · September 27th, 2013, 03:30 AM

Hey.
How much for the front fender?

BMWBUM · September 28th, 2013, 08:40 AM

engine to 75023? and also rear tire perhaps?

Also, willing to part engine? I need a cylinder/head section but don't need the bottom end/crank/trans. Had a truck back into and crack engine upper case (cylinders) and head. It'd be much easier to ship just that portion I imagine, and still leaves crank/trans parts for you to sell.

Thanks,
Richard

hawker1693 · September 30th, 2013, 08:20 PM

Quote:

Originally Posted by BMWBUM

engine to 75023? and also rear tire perhaps?

Also, willing to part engine? I need a cylinder/head section but don't need the bottom end/crank/trans. Had a truck back into and crack engine upper case (cylinders) and head. It'd be much easier to ship just that portion I imagine, and still leaves crank/trans parts for you to sell.

Thanks,
Richard

Sorry I've got someone fixing the frame for me so I wont be parting it out any further.

August 27th, 2013, 08:21 PM	#1
hawker1693 ninjette.org member Name: Hawker Location: MI Join Date: Jul 2013 Motorcycle(s): 2001 Ninja 250 Posts: 66	2001 Ninja 250 Part out Hey guys I've got an '01 Ninja 250 that has a broken frame and decided the best option for me at the moment is to part it out. So, I've got the whole bike I'll list a few things that are broken to save some questions. The BAD: Front upper fairing has a bit of road rash and a couple cracks one about 5-7in long and one right at the bolt. Both fixable if you have the skills. Front lower fairing (no picture right now) is cracked right in the front above the grille. Also fixable. Fender? whatever you wanna call it for the front tire is good but has a few scratches. Left side fairing has a crack in it where the 'knob' click into the 'tab' on the gas tank. also its missing one of the rear 'knobs' otherwise its in good condition. Right side fairing is in good condition however the two front 'knobs' on the inside are glued on with who knows what kind of glue. Previous owner did it and its strange. Rear fairing is cracked underneath Gas tank is dented up pretty bad on both the top and the right side. And punctured cause a dummy not me, put to long of bolts in there! The front turn signals are not stock, they are crappy aftermarket signals. Headlight/speedo bracket is junk. However the speedo and headlight are in okay condition. Handlebars are bent but I believe forks are all good. The GOOD: Almost brand new (500 or so miles on it) Pirelli Sport Demon rear tire. 130 90 16. Decent (but stock) front tire with maybe 25-35% tread left? I'm not sure. Seat is in great condition! SOLD Runs good! not sure how other ninjas are but I just had to choke it on start up then ease out on the choke and it purrred. (have to check the mileage) and as far as other parts on the bike. Just ask. I'll be adding more pictures in a few min. __________________________________________________ Ride safe brodahs! Last futzed with by hawker1693; August 30th, 2013 at 06:21 PM.

August 27th, 2013, 08:34 PM	#2
verboten1 ninjette.org certified postwhore Name: Jason Location: Monroe, MI Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot. MOTM - June '15	How much for the headlight/gauge/fairing bracket ( throne the mirrors also bolt to) and the gauge cluster To 48161 Thanks! edit crap, just saw you said the bracket is crap. Where in MI are you? Maybe I can ride out for some parts. Thanks! __________________________________________________ '82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less.

August 29th, 2013, 07:11 PM	#8
TonyKZ1 ninjette.org member Name: Anthony Location: Marble Hill, MO Join Date: Dec 2008 Motorcycle(s): 1975 Kawasaki KZ400D (Sold), 1989 Kawasaki Ninja 250 (sold), 1997 Yamaha XJ600s Seca II Posts: 231	Hey, I might be interested in the Pirelli Sport Demon rear tire as mine is getting pretty worn. Really only 500 miles? Thanks, Tony __________________________________________________ 1997 Yamaha Seca II - mostly stock, Racetech upgraded forks, FZ6R rear shock, Oxford Heated Grips, Barkbusters Blizzard Handguards, a Scottoiler vSystem chain oiler. My Mileage Tracker Page.

September 3rd, 2013, 06:15 AM	#13
TonyKZ1 ninjette.org member Name: Anthony Location: Marble Hill, MO Join Date: Dec 2008 Motorcycle(s): 1975 Kawasaki KZ400D (Sold), 1989 Kawasaki Ninja 250 (sold), 1997 Yamaha XJ600s Seca II Posts: 231	Here's hoping that you can get it fixed! Tony __________________________________________________ 1997 Yamaha Seca II - mostly stock, Racetech upgraded forks, FZ6R rear shock, Oxford Heated Grips, Barkbusters Blizzard Handguards, a Scottoiler vSystem chain oiler. My Mileage Tracker Page.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2001 Ninja 250 Streetfighter	FvnnyL3tt3r1ng	Motorcycle-related	1	January 24th, 2015 07:04 PM
08' Ninja 250 Parts bike part out you name the part and price	BuckyNaked	Motorcycle-related	106	July 12th, 2011 02:01 PM
2001 ninja 250	james250ninja	1986 - 2007 Ninja 250R Tech Talk	1	April 22nd, 2010 06:45 PM

August 27th, 2013, 09:23 PM	#4
Sirref Private Joker Name: Ben Location: Towson, MD Join Date: Nov 2012 Motorcycle(s): '99/'01 Ninja 250 "sketchy", '13 Ninja 300 "yoshi", '03 GSXR 600 "merlin" Posts: A lot. MOTM - Mar '14	man I wish I had money Q_Q I would so jump on the engine and seat to help with my '01 rebuild so I wouldn't have to actually rebuild the engine lol

August 28th, 2013, 12:07 PM	#5
CaptainPlatypus ninjette.org member Name: Eric Location: Los Angeles Join Date: Apr 2013 Motorcycle(s): '86 Honda VFR700 Posts: 173	Definitely interested in the engine, depending on mileage and price.

August 28th, 2013, 03:23 PM	#7
FrugalNinja250 ninjette.org certified postwhore Name: Frugal Location: Dallas/Fort Worth (DFW) Join Date: Mar 2010 Motorcycle(s): Several Posts: A lot.	Man, it's too bad you can't go get the bike over in Delaware, $500 is quite reasonable and between the two you can come up with a pretty decent bike, and recoup some of your costs by selling off the duplicate and left over parts. http://www.ninjette.org/forums/showthread.php?t=147643

September 1st, 2013, 10:00 PM	#11
tommy tuff nuts Garage Junky Name: nick Location: north dallas area Join Date: Aug 2013 Motorcycle(s): 05 Z1000 & custom 99 ninja 250ex Posts: 35	I need a good working carb for my girlfriends bike she has owned the bike since july and hasnt got to ride it yet the guy we got it from sold us a pos I literally had to rebuild everything and if you could let it go for a reasonable price we would love to have it please p.m. me thanks

September 5th, 2013, 04:49 PM	#14
NaMeTaKeN33 ninjette.org member Name: Phil Location: Austin, Tx Join Date: Jul 2013 Motorcycle(s): 2006 Kawasaki Ninja 250 Posts: 12	Sorry for the late reply, but just got the seat and put it on. Thanks =D

September 9th, 2013, 03:57 PM	#15
MasterCylinder ninjette.org member Name: Bryan Location: TX Join Date: Apr 2012 Motorcycle(s): '90 ex250 Posts: 155	How much you lookin for the petcock?

September 10th, 2013, 08:50 AM	#16
tommy tuff nuts Garage Junky Name: nick Location: north dallas area Join Date: Aug 2013 Motorcycle(s): 05 Z1000 & custom 99 ninja 250ex Posts: 35	$40

September 11th, 2013, 06:57 AM	#17
eulark ninjette.org member Name: Cody Location: Wilmington, NC Join Date: Nov 2012 Motorcycle(s): 2003 Blue Ninja 250, 98 ZX6E, 06 ZX636 Posts: 249	How much for the coils and plug wires? Mine are crapping out on me.

September 12th, 2013, 10:13 PM	#19
tommy tuff nuts Garage Junky Name: nick Location: north dallas area Join Date: Aug 2013 Motorcycle(s): 05 Z1000 & custom 99 ninja 250ex Posts: 35	I will take that petcock for 20 and might want that carb can you p.m. me a picture of it? and it will be sat before I can buy that petcock from you

September 12th, 2013, 10:33 PM	#21
tommy tuff nuts Garage Junky Name: nick Location: north dallas area Join Date: Aug 2013 Motorcycle(s): 05 Z1000 & custom 99 ninja 250ex Posts: 35	Alright thanks

September 13th, 2013, 05:22 AM	#22
MasterCylinder ninjette.org member Name: Bryan Location: TX Join Date: Apr 2012 Motorcycle(s): '90 ex250 Posts: 155	dag... Tommy can have it. I just bought one on ebay out of impatients. =/

September 13th, 2013, 07:01 AM	#25
agentbad ninjette.org sage Name: bob Location: Earf Join Date: Apr 2013 Motorcycle(s): 2005 Ninja 250, 2006 SV650N Posts: 642	How much for toolkit?

September 14th, 2013, 10:11 AM	#27
DJayhawk ninjette.org member Name: Dennis Location: Kansas City Join Date: Sep 2013 Motorcycle(s): 2005 Ninja 250 Posts: 12	How much for the rear brake peddle, if its not bent? I'm also interested in the front bushings that hold the side fairings on. Battery strap? Thanks

September 17th, 2013, 01:03 PM	#28
Moso504 ninjette.org newbie Name: Michael Location: New Orleans, LA Join Date: Nov 2012 Motorcycle(s): 01 Ninja ex250 (sold!), 06 Ninja Ex250 Posts: 6	Im looking for the left handlebar to 70119, I dont need the controls tho. Someone knocked my bike over at the grocery and when I found it lying over it had bent the bar. I gotta take the bike to see my dad in Alabama next month so its gotta get fixed!

September 25th, 2013, 07:01 PM	#30
MaxxVE ninjette.org member Name: Grant Location: Mid-Michigan Join Date: Aug 2013 Motorcycle(s): 2006 Ninja 250 Posts: 83	If you change your mind again let me know. I'll take the cracked frame as long as it's titled still.

September 27th, 2013, 03:30 AM	#32
Obje0110 ninjette.org member Name: Emily Location: Nc Join Date: Dec 2011 Motorcycle(s): 2004 Kawasaki Ninja ex250 Posts: 33	Hey. How much for the front fender?

September 28th, 2013, 08:40 AM	#33
BMWBUM ninjette.org newbie Name: Richard Location: DFW Join Date: Sep 2013 Motorcycle(s): 05 ninja 250 94 BMW K75 Posts: 1	engine to 75023? and also rear tire perhaps? Also, willing to part engine? I need a cylinder/head section but don't need the bottom end/crank/trans. Had a truck back into and crack engine upper case (cylinders) and head. It'd be much easier to ship just that portion I imagine, and still leaves crank/trans parts for you to sell. Thanks, Richard