Pre Gen Part bike part out

A7xschecter6661 · October 18th, 2011, 04:39 PM

Hey guys. When we bought my mom's ninja we got a parts bike with it for fairings and stuff.

We are gonna part some of it out, as we don't need anything else.

I am not going to price anything, I would like you to contact me at EDITED with your offer on a particular part and I will agree or disagree on pricing and figure out shipping.

Not looking to make a crap ton of money on this, looking to get it out of the barn and help you guys out.

We are willing to sell the whole bike, it just doesn't have a title.
I do not know much about the bike, the owner said it starts runs for a few seconds and stalls. He said something about a cracked head, I don't know
Bike (1998) had 11k miles, so everything should still work correctly.

Here we go.

Anything pictured is for sale, not only what I list!

Everything from this is available except the bottom cowling (now on moms bike) and the ignition/tail lock

Gas tank, the guy was doing the body work on this, I assume it was dented.
Holds gas.

Front rim/oem junk tire decent tread, forks, rotor, caliper, hose

handlebars- left one is bent, ignition cylinder with key is sold, killswitch,starter assembly, choke/horn assembly.

radiator, fan/motor, coils, carbs, shifter, header

coolant jug, hoses, swing arm, chain, sprockets, chain cover, rear caliper, rear rotor, battery cables, airbox, rearsets including passenger, computer, kickstand

side panels, decent condition, faded from sticker removal, needs a little work and paint.

front fender, crack on the right side that goes around the fork. Repairable with fiberglass, scratches from being removed incorrectly through the front.

Seat, no rips dots are just dust/dirt

lower cowl, needs to be sanded, stickers removed maybe a little body work and repainted, no cracks.

Main fairing piece, cracked in multiple locations. Was on Mom's bike when we bought it originally. Reinforced and everything bolted together properly. With the price of new ones somebody may want this and work on it, but shipping doesn't seem like it will be fun!

Miscellaneous pile of parts, ripped apart fender assembly, ripped apart headlight (mod potential maybe), mirrors-one is missing glass, a few lenses and brackets.

Items that have been sold, updated so you know!

Ignition cylinder with key, including rear tail lock

CynicalC · October 18th, 2011, 06:14 PM

Wow that bike has had a rough life. GLWS! Wanna send me the two screws that go through the back of the throttle controls? I lost mine >_<

A7xschecter6661 · October 18th, 2011, 06:24 PM

Most of the damage was from being disassembled and thrown around the 2 garages it is in.

I'd prefer not to sell just the screws, but definitely will if it comes to it.
They are listed around $30 on ebay but I can beat that if you want the whole assembly.

If not, take a screw out of the choke side, and head to a hardware store, I am sure they are probably the same

cerberusrex25 · October 18th, 2011, 08:28 PM

Just like cynical I am in need of a bit of hardware. I need the 4 screws that secure the tank bracket to the frame, the screw that secures the brake lever to the master cylinder, the little screw that secures the brake switch to the master cylinder and the 4 screws that secure the tail plastics onto the frame, and the little choke lever found on the left handle bar. Please let me know if you are willing to part with this items and how much do you want for them, we'll discuss details over PMs.

Lou · October 26th, 2011, 02:21 PM

How much for the seat???

A7xschecter6661 · October 27th, 2011, 08:39 PM

Quote:

Originally Posted by Lou

How much for the seat???

$10+ shipping?
Email me at the address at the top of the first post if you want it

Jiggles · October 27th, 2011, 08:48 PM

Doh I wanted the seat

A7xschecter6661 · June 10th, 2012, 10:19 PM

Alright guys, I am bumping this UP.

I ripped a lot of the bike apart tonight while I was taking the carbs out to swap to my moms bike to see if I can fix an issue.

That being said, a lot of the parts are already disassembled and in a parts bin.

Contact me VIA Email EDITED if you need certain parts and we can discuss price and shipping

Most of the bike is there but I can't guarantee without confirming!

Front wheel
back wheel
rear rotor
rear master cylinder, reservoir,hose and caliper (I pushed on the piston and the other one blew out and shot brake fluid all over me, awesome!)
ignition coils
relays
main fuse block
engine computer
radiator
hoses
lines
wiring harness
right side clip on, left is bent a little
kickstand
center stand (I will have to make sure this is still worth using)
rear sets
ignition cylinder (comes with seat lock)
gas tank (see first post)
bottom fairing (could be prepped and painted)
side panels (could be prepped and painted)
seat (has white spots on it, might come off but didn't by just washing)
front fender (cracks around fork area, could be reinforced and painted)
header pipe
air box (no filter)

once again, EMAIL ME. I rarely check here

You name it, if I have it, I'll sell it!

A7xschecter6661 · June 11th, 2012, 07:25 PM

Here guys, a bunch more pictures!!

coils, I have both

main fuse block

horn

kickstand, has some rust

coolant jug and hoses

brake light switch

airbox, no filter

wiring harness

chain guard

rear caliper (needs a rebuild I think), hose, master cylinder and resovoir

tank, needs work on the outside, some rust on the part that forms around the main frame rail, holds gas and doesn't leak at pump or bolt holes.

drdriftking007 · June 14th, 2012, 09:03 AM

still have the rear brake bracket? Ill buy

davidw38901 · June 14th, 2012, 10:10 AM

right handel bar shipped to 38901

Snake · June 14th, 2012, 11:19 AM

Email sent

A7xschecter6661 · June 14th, 2012, 07:33 PM

All responded too, remember guys I want this stuff out of the barn.

No reasonable offer refused!

Please remember email is the best way to contact me!

A7xschecter6661 · June 14th, 2012, 08:35 PM

Once I get it down to the frame I will probably be sand blasting it and repainting it and selling it as a title-less frame that you can weld your VIN on to. So that's up for grabs too as well as the motor, rims, header pipe, carbs.

Please remember email is the best way to contact me!

A7xschecter6661 · June 18th, 2012, 07:33 PM

Keep em coming, everything must go.

Shipped out 3 packages, 1 pending payment

dirty nasty · June 19th, 2012, 02:44 PM

Would you happen to have the front turn signals? Shoot me a PM when you can. Thanks!

kraazy · June 19th, 2012, 03:51 PM

do have left handle bar
and left peg still

A7xschecter6661 · June 22nd, 2012, 07:45 PM

Keep em coming, I might have the engine sold, not sure yet though

CZroe · June 23rd, 2012, 10:24 AM

PM sent. Forgot to mention the pins that hold the pegs on. I could use those too!

A7xschecter6661 · June 25th, 2012, 02:28 PM

Keep em coming, contact me via email at top of page!

Lots left to part out

Mocha Man · June 25th, 2012, 03:11 PM

Quote:

Originally Posted by dirty nasty

Would you happen to have the front turn signals? Shoot me a PM when you can. Thanks!

Did you end up getting the turn signals by any chance?

arieon69 · June 25th, 2012, 05:42 PM

handlebars and stuff?

A7xschecter6661 · June 25th, 2012, 07:21 PM

I don't have front turn signals but I do have rear.

I have right side handlebar, left side appears bent a little

arieon69 · June 26th, 2012, 01:44 PM

I just need that whole piece.. I guess it's called the tree... on my parts bike its shotty.

A7xschecter6661 · June 26th, 2012, 07:26 PM

Quote:

Originally Posted by arieon69

I just need that whole piece.. I guess it's called the tree... on my parts bike its shotty.

What they connect to? Think it's the triple tree.

I have it, can sell it without the lock cylinder

arieon69 · June 26th, 2012, 08:04 PM

trying to get it all together but thats ok. does the starter switch and work properly?

A7xschecter6661 · June 26th, 2012, 08:49 PM

Quote:

Originally Posted by arieon69

trying to get it all together but thats ok. does the starter switch and work properly?

I have no way to test anything as the bike is completely disassembled, the guy we bought it from said the bike does start with a battery. But like I said I have no way to verify sadly

A7xschecter6661 · July 1st, 2012, 05:29 PM

Keep em coming guys! Might have somebody local interested in the motor

Alex · July 5th, 2012, 12:49 PM

/closed

OP plans to start another thread

October 18th, 2011, 04:39 PM	#1
A7xschecter6661 ....................... Name: Peter Location: New York Join Date: Jul 2011 Motorcycle(s): 2003 Yamaha R6 Posts: 113	Pre Gen Part bike part out Hey guys. When we bought my mom's ninja we got a parts bike with it for fairings and stuff. We are gonna part some of it out, as we don't need anything else. I am not going to price anything, I would like you to contact me at EDITED with your offer on a particular part and I will agree or disagree on pricing and figure out shipping. Not looking to make a crap ton of money on this, looking to get it out of the barn and help you guys out. We are willing to sell the whole bike, it just doesn't have a title. I do not know much about the bike, the owner said it starts runs for a few seconds and stalls. He said something about a cracked head, I don't know Bike (1998) had 11k miles, so everything should still work correctly. Here we go. Anything pictured is for sale, not only what I list! Everything from this is available except the bottom cowling (now on moms bike) and the ignition/tail lock Gas tank, the guy was doing the body work on this, I assume it was dented. Holds gas. Front rim/oem junk tire decent tread, forks, rotor, caliper, hose handlebars- left one is bent, ignition cylinder with key is sold, killswitch,starter assembly, choke/horn assembly. radiator, fan/motor, coils, carbs, shifter, header coolant jug, hoses, swing arm, chain, sprockets, chain cover, rear caliper, rear rotor, battery cables, airbox, rearsets including passenger, computer, kickstand side panels, decent condition, faded from sticker removal, needs a little work and paint. front fender, crack on the right side that goes around the fork. Repairable with fiberglass, scratches from being removed incorrectly through the front. Seat, no rips dots are just dust/dirt lower cowl, needs to be sanded, stickers removed maybe a little body work and repainted, no cracks. Main fairing piece, cracked in multiple locations. Was on Mom's bike when we bought it originally. Reinforced and everything bolted together properly. With the price of new ones somebody may want this and work on it, but shipping doesn't seem like it will be fun! Miscellaneous pile of parts, ripped apart fender assembly, ripped apart headlight (mod potential maybe), mirrors-one is missing glass, a few lenses and brackets. Items that have been sold, updated so you know! Ignition cylinder with key, including rear tail lock Last futzed with by A7xschecter6661; November 10th, 2011 at 09:00 PM.

October 18th, 2011, 06:14 PM	#2
CynicalC ninjette.org certified postwhore Name: Colin Location: Bay Area Join Date: Feb 2011 Motorcycle(s): '96 EX250 Posts: A lot.	Wow that bike has had a rough life. GLWS! Wanna send me the two screws that go through the back of the throttle controls? I lost mine >_< __________________________________________________ Ç¥ñï©ª\| ßÿ Ñâ7µ®é. Äñt¡~§º¢Ïä\| ßý Çhøî©è.

October 27th, 2011, 08:48 PM	#7
Jiggles Jigglin' your Jiglets Name: Sean Location: San Jose, Ca Join Date: Jun 2011 Motorcycle(s): 2009 K1300S, 2013 Ninja 300, 2011 Ninja 250R, Faster than Unregistered's ninjette Posts: Too much. Blog Entries: 1 MOTM - Apr '13	Doh I wanted the seat __________________________________________________ If the Ninja 250 doesn't have enough power for you, then you don't know how to ride it. AFM #676 Supersports are for n00bs

June 11th, 2012, 07:25 PM	#9
A7xschecter6661 ....................... Name: Peter Location: New York Join Date: Jul 2011 Motorcycle(s): 2003 Yamaha R6 Posts: 113	Here guys, a bunch more pictures!! coils, I have both main fuse block horn kickstand, has some rust coolant jug and hoses brake light switch airbox, no filter wiring harness chain guard rear caliper (needs a rebuild I think), hose, master cylinder and resovoir tank, needs work on the outside, some rust on the part that forms around the main frame rail, holds gas and doesn't leak at pump or bolt holes. Last futzed with by A7xschecter6661; July 1st, 2012 at 05:29 PM.

June 14th, 2012, 07:33 PM	#13
A7xschecter6661 ....................... Name: Peter Location: New York Join Date: Jul 2011 Motorcycle(s): 2003 Yamaha R6 Posts: 113	All responded too, remember guys I want this stuff out of the barn. No reasonable offer refused! Please remember email is the best way to contact me! Last futzed with by A7xschecter6661; June 14th, 2012 at 08:43 PM.

October 18th, 2011, 06:24 PM	#3
A7xschecter6661 ....................... Name: Peter Location: New York Join Date: Jul 2011 Motorcycle(s): 2003 Yamaha R6 Posts: 113	Most of the damage was from being disassembled and thrown around the 2 garages it is in. I'd prefer not to sell just the screws, but definitely will if it comes to it. They are listed around $30 on ebay but I can beat that if you want the whole assembly. If not, take a screw out of the choke side, and head to a hardware store, I am sure they are probably the same

October 18th, 2011, 08:28 PM	#4
cerberusrex25 Accesories Guru Name: Dave Location: Centreville, VA Join Date: May 2011 Motorcycle(s): '99 EX250(Cafe/fighter project) Posts: 537	Just like cynical I am in need of a bit of hardware. I need the 4 screws that secure the tank bracket to the frame, the screw that secures the brake lever to the master cylinder, the little screw that secures the brake switch to the master cylinder and the 4 screws that secure the tail plastics onto the frame, and the little choke lever found on the left handle bar. Please let me know if you are willing to part with this items and how much do you want for them, we'll discuss details over PMs.

October 26th, 2011, 02:21 PM	#5
Lou ninjette.org member Name: LOU Location: Imperial County, California Join Date: Nov 2010 Motorcycle(s): GreenSE 09 250R Posts: 247	How much for the seat???

June 10th, 2012, 10:19 PM	#8
A7xschecter6661 ....................... Name: Peter Location: New York Join Date: Jul 2011 Motorcycle(s): 2003 Yamaha R6 Posts: 113	Alright guys, I am bumping this UP. I ripped a lot of the bike apart tonight while I was taking the carbs out to swap to my moms bike to see if I can fix an issue. That being said, a lot of the parts are already disassembled and in a parts bin. Contact me VIA Email EDITED if you need certain parts and we can discuss price and shipping Most of the bike is there but I can't guarantee without confirming! Front wheel back wheel rear rotor rear master cylinder, reservoir,hose and caliper (I pushed on the piston and the other one blew out and shot brake fluid all over me, awesome!) ignition coils relays main fuse block engine computer radiator hoses lines wiring harness right side clip on, left is bent a little kickstand center stand (I will have to make sure this is still worth using) rear sets ignition cylinder (comes with seat lock) gas tank (see first post) bottom fairing (could be prepped and painted) side panels (could be prepped and painted) seat (has white spots on it, might come off but didn't by just washing) front fender (cracks around fork area, could be reinforced and painted) header pipe air box (no filter) once again, EMAIL ME. I rarely check here You name it, if I have it, I'll sell it!

June 14th, 2012, 09:03 AM	#10
drdriftking007 Drdriftking007 Name: Eddie Location: Houston Texas Join Date: Apr 2012 Motorcycle(s): 2007 Ninja 250 Posts: 67	still have the rear brake bracket? Ill buy

June 14th, 2012, 10:10 AM	#11
davidw38901 ninjette.org member Name: david Location: grenada,Ms Join Date: Apr 2012 Motorcycle(s): ninja 250r 2005 Posts: 45	right handel bar shipped to 38901

June 14th, 2012, 11:19 AM	#12
Snake ninjette.org certified postwhore Name: Rick Location: Alexandria, Louisiana Join Date: Jan 2009 Motorcycle(s): 05 Blue Ninja 250 Posts: Too much. MOTY - 2017, MOTM - Jan '19, Oct '16, May '14	Email sent

June 14th, 2012, 08:35 PM	#14
A7xschecter6661 ....................... Name: Peter Location: New York Join Date: Jul 2011 Motorcycle(s): 2003 Yamaha R6 Posts: 113	Once I get it down to the frame I will probably be sand blasting it and repainting it and selling it as a title-less frame that you can weld your VIN on to. So that's up for grabs too as well as the motor, rims, header pipe, carbs. Please remember email is the best way to contact me!

June 18th, 2012, 07:33 PM	#15
A7xschecter6661 ....................... Name: Peter Location: New York Join Date: Jul 2011 Motorcycle(s): 2003 Yamaha R6 Posts: 113	Keep em coming, everything must go. Shipped out 3 packages, 1 pending payment

June 19th, 2012, 02:44 PM	#16
dirty nasty ninjette.org sage Name: Karl Location: MA Join Date: Jun 2012 Motorcycle(s): 2000 Kwak Ninja 250 and 1998 Yamaha YZ400F Posts: 534	Would you happen to have the front turn signals? Shoot me a PM when you can. Thanks!

June 19th, 2012, 03:51 PM	#17
kraazy We need 1.21Gigawatts now Name: KrAaZy Location: NYC Join Date: May 2012 Motorcycle(s): 1Badazz2fiddy,ZRV 500 Posts: 94	do have left handle bar and left peg still

June 22nd, 2012, 07:45 PM	#18
A7xschecter6661 ....................... Name: Peter Location: New York Join Date: Jul 2011 Motorcycle(s): 2003 Yamaha R6 Posts: 113	Keep em coming, I might have the engine sold, not sure yet though

June 23rd, 2012, 10:24 AM	#19
CZroe CPT Falcon Name: J.Emmett Turner Location: Newnan, GA Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.	PM sent. Forgot to mention the pins that hold the pegs on. I could use those too!

June 25th, 2012, 02:28 PM	#20
A7xschecter6661 ....................... Name: Peter Location: New York Join Date: Jul 2011 Motorcycle(s): 2003 Yamaha R6 Posts: 113	Keep em coming, contact me via email at top of page! Lots left to part out

June 25th, 2012, 05:42 PM	#22
arieon69 ninjette.org member Name: Shay Location: Little Rock, AR Join Date: Jun 2012 Motorcycle(s): 2000 Ninja EX250 Posts: 12	handlebars and stuff?

June 25th, 2012, 07:21 PM	#23
A7xschecter6661 ....................... Name: Peter Location: New York Join Date: Jul 2011 Motorcycle(s): 2003 Yamaha R6 Posts: 113	I don't have front turn signals but I do have rear. I have right side handlebar, left side appears bent a little

June 26th, 2012, 01:44 PM	#24
arieon69 ninjette.org member Name: Shay Location: Little Rock, AR Join Date: Jun 2012 Motorcycle(s): 2000 Ninja EX250 Posts: 12	I just need that whole piece.. I guess it's called the tree... on my parts bike its shotty.

June 26th, 2012, 08:04 PM	#26
arieon69 ninjette.org member Name: Shay Location: Little Rock, AR Join Date: Jun 2012 Motorcycle(s): 2000 Ninja EX250 Posts: 12	trying to get it all together but thats ok. does the starter switch and work properly?

July 1st, 2012, 05:29 PM	#28
A7xschecter6661 ....................... Name: Peter Location: New York Join Date: Jul 2011 Motorcycle(s): 2003 Yamaha R6 Posts: 113	Keep em coming guys! Might have somebody local interested in the motor

July 5th, 2012, 12:49 PM	#29
Alex ninjette.org dude Name: 1 guess :-) Location: SF Bay Area Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much. Blog Entries: 7	/closed OP plans to start another thread __________________________________________________ Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Gen part out	RacerX113	Motorcycle-related	11	November 15th, 2014 04:36 PM
FS Ninja 250 Pre-Gen part out	AFazakerley	Motorcycle-related	13	October 23rd, 2013 01:28 AM
Pre-gen Part-out (pic heavy)	AFazakerley	Motorcycle-related	1	June 21st, 2013 08:49 PM
FS/ part out new gen and pre gen 250r ninja	carlos	Motorcycle-related	3	May 14th, 2012 10:25 PM
08' Ninja 250 Parts bike part out you name the part and price	BuckyNaked	Motorcycle-related	106	July 12th, 2011 02:01 PM