ninjette.org

Go Back   ninjette.org > Marketplace > Motorcycle-related

Reply
 
Thread Tools
Old July 20th, 2021, 12:36 PM   #1
mgentz
Board Member
 
Name: ...
Location: WI
Join Date: Dec 2011

Motorcycle(s): 250R (street), 250R (dirt)

Posts: A lot.
FS 2009 Kawasaki Ninja 250

Currently located around Sarasota, FL. Milwaukee WI, but I am moving to the St. Louis MO area soon and could deliver along that route.
17,XXX Miles
Clear and Clean Title
No Accidents and never down
Maintained EXTREMELY well

All stock and spare parts that I have will be given to the buyer as well. There are way too many to list, but I can think of: Stock carbs, spare sprockets, spark plugs, gaskets, rearsets, some crank bearings, other random bearings, some bolts, K&N pod filter, many jets and much more!

ASKING PRICE $5000

Will post current pics soon.

Summary of Motorcycle:

Suspension
Forks were redone and optimized by Ed Sorbo of Lindemann Engineering (Ed also added fork drains at the bottom of the forks so I can do oil changes w/o removing the forks.)
SSR Preload caps
Penske triple with LE valving and short reservoir hose (will mount to battery box)
Springs front and rear are based on my weight and riding style.
2010 Aluminum shock triangle for less weight!
SSR preload caps

Ignition
BRT-is
NGK CR8EIX plugs
Takai Racing Coils

Engine
APE Ported head with +1.5mm intake valves
APE custom springs
New guides, seals and retainers
Falicon ultra light crank mods
Falicon gram matched, shot peened and polished rods with bronze bushings
JE 13.5:1 pistons +2mm
BEET cams both intake and exhaust
newer cam chain
newer cam chain tensioner
ISF polished transmission gears
Worldwide ceramic transmission bearings
Custom SS oil line
Newer water pump and hoses
Nikasil cylinder coating
Thermobob 3
Engine EGR block off plates
Lots of new seals, gaskets and consumables

Fuel/Intake
CR31 carbs full complement of jetting
Ported stock airbox
heat shield added to rear of engine for cooler air
heat shield added to underside of gas tank

Exhaust
Leo Vince carbon superbike exhaust with custom header flanges that perfectly match the head and pipe for superior flow (I don't need to use gaskets). Pics elsewhere
NGK A/F ratio gauge installed

Frame and Controls
Motion Pro VR Throttle (50mm cam)
Motion Pro Right Cluster Switch
Heated Grips
WC Clip-ons
Stainless bolts where I could easily replace
Aluminum gas cap bolts, full aluminum race spec engine kit from ProBolt, AL sprocket nuts, TI brake bolts, TI oil drain bolt
Lightech Rearsets
Ohlins damper with BEET mount

Brakes
@rojoracing53 modified rear brake rotor (shaved off 13 oz or so!!!)
@rojoracing53 modified rear brake hanger (captive)
Braking full floating front rotor
Vesrah SJRL front pads
SS brake lines (both custom)
Brembo RCS15 radial master, reservoir, and custom bracket
Rear reservoir delete

Other Fun Stuff
Newer tires
MicroBlue Ceramic Wheel Bearings
New sprockets with a 520 non-oring chain (15/43)
Engine Ice high performance coolant (no mixing)
Yoshimura Fender eliminator
Fully safety wired past WERA/AMA specs
Kawasaki DB windscreen
Spears Racing Chain Holder
Battery Tender
Super Bright Full LED tail light
Captive front wheel spacers (eliminates speedo)

Probably more that I am missing. Truly a sight to see!!!
mgentz is offline   Reply With Quote




Old July 20th, 2021, 08:05 PM   #2
mgentz
Board Member
 
Name: ...
Location: WI
Join Date: Dec 2011

Motorcycle(s): 250R (street), 250R (dirt)

Posts: A lot.
Pics
Attached Images
File Type: jpg 20210720_201919.jpg (127.1 KB, 31 views)
File Type: jpg 20210720_201934.jpg (110.8 KB, 33 views)
File Type: jpg 20210720_201942.jpg (120.2 KB, 19 views)
File Type: jpg 20210720_201955.jpg (85.5 KB, 24 views)
File Type: jpg 20210720_202010.jpg (80.5 KB, 23 views)
mgentz is offline   Reply With Quote


Old July 20th, 2021, 08:07 PM   #3
mgentz
Board Member
 
Name: ...
Location: WI
Join Date: Dec 2011

Motorcycle(s): 250R (street), 250R (dirt)

Posts: A lot.
More pics
Attached Images
File Type: jpg 20210720_202028.jpg (56.2 KB, 26 views)
File Type: jpg 20210720_202043.jpg (104.0 KB, 26 views)
File Type: jpg 20210720_202052.jpg (88.5 KB, 27 views)
File Type: jpg 20210720_202100.jpg (84.9 KB, 21 views)
File Type: jpg 20210720_202105.jpg (86.3 KB, 20 views)
mgentz is offline   Reply With Quote


Old April 7th, 2022, 11:13 AM   #4
mgentz
Board Member
 
Name: ...
Location: WI
Join Date: Dec 2011

Motorcycle(s): 250R (street), 250R (dirt)

Posts: A lot.
BUMP
mgentz is offline   Reply With Quote


Old September 15th, 2022, 10:53 AM   #5
mgentz
Board Member
 
Name: ...
Location: WI
Join Date: Dec 2011

Motorcycle(s): 250R (street), 250R (dirt)

Posts: A lot.
BUMP

Now located in Sarasota, FL. I'll drop price to $4500

If no serious offers, I may part it.
mgentz is offline   Reply With Quote


Old October 11th, 2022, 02:01 PM   #6
mgentz
Board Member
 
Name: ...
Location: WI
Join Date: Dec 2011

Motorcycle(s): 250R (street), 250R (dirt)

Posts: A lot.
Anyone want parts? If I can get buyers for the major items, I’ll part it.

Motor
Frame
Suspension

Otherwise $4250 is pretty darn low for this thing
mgentz is offline   Reply With Quote


Old October 31st, 2022, 09:27 AM   #7
mgentz
Board Member
 
Name: ...
Location: WI
Join Date: Dec 2011

Motorcycle(s): 250R (street), 250R (dirt)

Posts: A lot.
$4000 for the bike is as low as I can go.

Wont find a better deal anywhere on such a nice bike.

Last futzed with by mgentz; December 1st, 2022 at 07:43 AM.
mgentz is offline   Reply With Quote


Old October 31st, 2022, 05:33 PM   #8
subxero
dirty boy
 
subxero's Avatar
 
Name: Joe
Location: Johnstown, PA
Join Date: Sep 2012

Motorcycle(s): I don't even know anymore??

Posts: A lot.
MOTM - Apr '14
It's unfortunate but next to no one wants to pay premium for a tricked out ex250. Not sure what the 250cc racing scene is like these days either with all the small displacement increases in new bikes over the years.

When I sold my 250 I ended up tearing it down and trying to turn it back to stock as much as i could and sell off the extras separately but I didn't really have any engine work either though.

Tough market, good luck man.
__________________________________________________
I love the smell of burning pre-mix in the morning

I don't think I'm a lot dumber than you thought that I think that I thought I was once.
subxero is offline   Reply With Quote


Old October 31st, 2022, 06:22 PM   #9
mgentz
Board Member
 
Name: ...
Location: WI
Join Date: Dec 2011

Motorcycle(s): 250R (street), 250R (dirt)

Posts: A lot.
I would part it out if I could find someone that wants the major parts. I would even strip it down to as much of stock as I could, if I had a buyer for some of the “race” parts. I’m open to options.

However, if someone wants the whole thing, they will get one heck of a machine
mgentz is offline   Reply With Quote


1 out of 1 members found this post helpful.
Old November 2nd, 2022, 04:40 AM   #10
Topaz
ninjette.org member
 
Topaz's Avatar
 
Name: Topaz
Location: South Florida
Join Date: Mar 2017

Motorcycle(s): 2013 Ninja 300

Posts: 205
Beautiful bike! What a shame to have to part it out.
Topaz is offline   Reply With Quote


Old November 2nd, 2022, 11:19 AM   #11
mgentz
Board Member
 
Name: ...
Location: WI
Join Date: Dec 2011

Motorcycle(s): 250R (street), 250R (dirt)

Posts: A lot.
I would like for it to go to a good home!

Also, I cannot edit my original post, but I am now located in Sarasota, FL. Hopefully that helps!!!
mgentz is offline   Reply With Quote


Old November 2nd, 2022, 11:42 AM   #12
thedrewski86
ninjette.org guru
 
thedrewski86's Avatar
 
Name: Drew
Location: SoCal
Join Date: Jul 2013

Motorcycle(s): 2007 SV650S 2005 EX250F

Posts: 439
I would love to take over ownership if I actually had any need of it
That's the same paint scheme as my wife's old new-gen we had back in the day. I like the new-gen 250s but they're obsolete like everything nowadays. I'm just steady rolling with my moldy-oldie first-gen.
__________________________________________________
Don't think, look!
thedrewski86 is offline   Reply With Quote


Old November 2nd, 2022, 02:49 PM   #13
Alex
ninjette.org dude
 
Alex's Avatar
 
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008

Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE, '15 CRF110F, '13 TT-R50E

Posts: Too much.
Blog Entries: 7
Quote:
Originally Posted by mgentz View Post
Also, I cannot edit my original post, but I am now located in Sarasota, FL. Hopefully that helps!!!
Edited.
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org

ninjette.org Terms of Service

Shopping for motorcycle parts or equipment? Come here first.

The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered)
Alex is offline   Reply With Quote


Old November 3rd, 2022, 10:55 AM   #14
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011

Motorcycle(s): CB125T EX250F-street Ninja250R-race CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR VFR750F

Posts: A lot.
MOTY - 2018, MOTM - Nov '17
Seems race-bikes are moving pretty good on various FB groups. I've had several get sold before I even had chance to contact seller.
DannoXYZ is offline   Reply With Quote


Old November 3rd, 2022, 05:45 PM   #15
subxero
dirty boy
 
subxero's Avatar
 
Name: Joe
Location: Johnstown, PA
Join Date: Sep 2012

Motorcycle(s): I don't even know anymore??

Posts: A lot.
MOTM - Apr '14
race scene should be decent in Florida, should definitely help a bit.
__________________________________________________
I love the smell of burning pre-mix in the morning

I don't think I'm a lot dumber than you thought that I think that I thought I was once.
subxero is offline   Reply With Quote


Old November 6th, 2022, 02:38 PM   #16
mgentz
Board Member
 
Name: ...
Location: WI
Join Date: Dec 2011

Motorcycle(s): 250R (street), 250R (dirt)

Posts: A lot.
Quote:
Originally Posted by DannoXYZ View Post
Seems race-bikes are moving pretty good on various FB groups. I've had several get sold before I even had chance to contact seller.
Which FB group do you recommend?
mgentz is offline   Reply With Quote


Old November 6th, 2022, 02:39 PM   #17
mgentz
Board Member
 
Name: ...
Location: WI
Join Date: Dec 2011

Motorcycle(s): 250R (street), 250R (dirt)

Posts: A lot.
Quote:
Originally Posted by subxero View Post
race scene should be decent in Florida, should definitely help a bit.
I would hope so. I want to sell but I may just end up keeping it and using it at the local kart/mini track.
mgentz is offline   Reply With Quote


1 out of 1 members found this post helpful.
Old November 6th, 2022, 02:46 PM   #18
Triple Jim
Guy Who Enjoys Riding
 
Triple Jim's Avatar
 
Name: Jim
Location: North Central North Carolina
Join Date: Jul 2016

Motorcycle(s): Ninja 250

Posts: A lot.
MOTM - Oct '18, Aug '17, Aug '16
Quote:
Originally Posted by mgentz View Post
I would hope so. I want to sell but I may just end up keeping it and using it at the local kart/mini track.
I always wanted to try mine on the kart track. I've taken another bike there, but not the Ninja.
Triple Jim is offline   Reply With Quote


Old November 30th, 2022, 01:09 PM   #19
mgentz
Board Member
 
Name: ...
Location: WI
Join Date: Dec 2011

Motorcycle(s): 250R (street), 250R (dirt)

Posts: A lot.
Any takers....? Whole bike, engine, suspension, etc?
mgentz is offline   Reply With Quote


Old December 1st, 2022, 07:44 AM   #20
mgentz
Board Member
 
Name: ...
Location: WI
Join Date: Dec 2011

Motorcycle(s): 250R (street), 250R (dirt)

Posts: A lot.
Quote:
Originally Posted by DannoXYZ View Post
Seems race-bikes are moving pretty good on various FB groups. I've had several get sold before I even had chance to contact seller.
Please do tell which groups
mgentz is offline   Reply With Quote


Old December 1st, 2022, 08:42 PM   #21
ROB654
ninjette.org member
 
Name: ROB
Location: WORCESTER
Join Date: Oct 2014

Motorcycle(s): 08 NINJA 250,EX500,YSR50,86 VFR750

Posts: 54
How much for motor? Also how much for the carbs?
ROB654 is offline   Reply With Quote


Old December 2nd, 2022, 06:04 AM   #22
mgentz
Board Member
 
Name: ...
Location: WI
Join Date: Dec 2011

Motorcycle(s): 250R (street), 250R (dirt)

Posts: A lot.
Another member here told me $2000. That sounds fair to me.

Carbs for $300 with the motor. I would include my spare jets as well.
mgentz is offline   Reply With Quote


Reply





Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 03:15 PM.


Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2023, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2023 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are Copyright 2022 ninjette.org, All rights reserved.