October 27th, 2011, 10:08 PM | #1 |
ninjette.org member
Name: Pete
Location: Perth Australia
Join Date: Jun 2011 Motorcycle(s): 2009 ninja 250r Posts: 75
|
My closing cable seems to be too slack
I have been searching all threads and I haven't seen anything on the assembly of throttle cables, I am trying to put mine back together and have found my cable just don't seem right, I mean they seem to be going back to where it looks like they go but when you put the handle back together the closing cable seems to be too long, however I took the old ones and compared them and they are the same size, I have fully tightened them and it seems the opening cable works fine but the closing cable loops up and does nothing, everything was fine before I replaced them, I replaced both because the plastic fitting on the opening cable broke in the crash when the handle bar bent down. I am asking just for my own sanity maybe some photo's or advice, I'm sure its not gone back together properly but it is doing my head in at the moment, HELP ME OH EXPERIENCED ONES.
__________________________________________________
|
|
October 27th, 2011, 11:35 PM | #2 |
ninjette.org certified postwhore
Name: Bob
Location: CA
Join Date: Dec 2008 Motorcycle(s): '08 Ninja 250r, '14 CBR500r Posts: A lot.
|
All you need to do is tighten it a little. That bottom nut may have slipped a bit. Don't sweat it, it isn't critical, and is easy to fix.
__________________________________________________
Honda Interceptor VFR800 DLX (2014, 8th gen) Honda CBR500r (2014) - FOR SALE Kawi Ninja 250r (2008) - Restored and passed-down within family, only to be abandoned Last futzed with by headshrink; November 2nd, 2011 at 08:21 AM. |
|
October 28th, 2011, 12:13 AM | #3 |
ninjette.org member
Name: Pete
Location: Perth Australia
Join Date: Jun 2011 Motorcycle(s): 2009 ninja 250r Posts: 75
|
It is on max already and is about an inch out. I'm sure I have not assembled it right somewhere
__________________________________________________
|
|
October 31st, 2011, 05:59 AM | #4 |
ninjette.org member
Name: Pete
Location: Perth Australia
Join Date: Jun 2011 Motorcycle(s): 2009 ninja 250r Posts: 75
|
hello any one , this has got knobs on it, I have no room for tension the cable is maxed out, and doesn't return the throttle , every thing seems fine is there a link that can clearly show me the throttle assembly?, there is definitely something not right
__________________________________________________
|
|
November 2nd, 2011, 12:40 AM | #5 |
wat
Name: wat
Location: tustin/long beach
Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much.
Blog Entries: 5
MOTM - Oct '12, Feb '14
|
there are two adjustment points. at the handle bars and at the carbs. if your handle bars are maxed out, adjust the cables at the carbs.
__________________________________________________
|
|
November 2nd, 2011, 01:30 AM | #6 |
ninjette.org certified postwhore
Name: Bob
Location: CA
Join Date: Dec 2008 Motorcycle(s): '08 Ninja 250r, '14 CBR500r Posts: A lot.
|
If we're talking about the opening cable, I would screw the one at the handle bars all the way in, and only adjust the one at the carbs. The reason for this is because the plastic casing at the handlebars break pretty easily. I'm on my third throttle cable because of this.
If we're talking about the closing cable, the only adjustment is at the carbs.
__________________________________________________
Honda Interceptor VFR800 DLX (2014, 8th gen) Honda CBR500r (2014) - FOR SALE Kawi Ninja 250r (2008) - Restored and passed-down within family, only to be abandoned |
|
November 2nd, 2011, 01:42 AM | #7 |
ninjette.org member
Name: Pete
Location: Perth Australia
Join Date: Jun 2011 Motorcycle(s): 2009 ninja 250r Posts: 75
|
both cables at the carbs and handle bars are maxxed out, I'll take some photo's
__________________________________________________
|
|
November 2nd, 2011, 08:22 AM | #8 |
ninjette.org certified postwhore
Name: Bob
Location: CA
Join Date: Dec 2008 Motorcycle(s): '08 Ninja 250r, '14 CBR500r Posts: A lot.
|
Seems strange, but maybe your cables have really stretched that much.... you might be looking at new cables.
__________________________________________________
Honda Interceptor VFR800 DLX (2014, 8th gen) Honda CBR500r (2014) - FOR SALE Kawi Ninja 250r (2008) - Restored and passed-down within family, only to be abandoned |
|
November 2nd, 2011, 03:51 PM | #9 |
ninjette.org member
Name: Pete
Location: Perth Australia
Join Date: Jun 2011 Motorcycle(s): 2009 ninja 250r Posts: 75
|
Lol these are new, I think something else isn't right, I will take photo's when I get some time,been really busy at work lately
__________________________________________________
|
|
November 7th, 2011, 03:04 AM | #10 |
ninjette.org member
Name: Pete
Location: Perth Australia
Join Date: Jun 2011 Motorcycle(s): 2009 ninja 250r Posts: 75
|
This what I mean by too slack as u can see the adjustments are nearly all the way out and still a long way to go. where could I have gone wrong.
__________________________________________________
|
|
November 7th, 2011, 10:46 AM | #11 |
ninjette.org certified postwhore
Name: Bob
Location: CA
Join Date: Dec 2008 Motorcycle(s): '08 Ninja 250r, '14 CBR500r Posts: A lot.
|
Ahhh... wow! I have no idea. That sure doesn't even look possible.
__________________________________________________
Honda Interceptor VFR800 DLX (2014, 8th gen) Honda CBR500r (2014) - FOR SALE Kawi Ninja 250r (2008) - Restored and passed-down within family, only to be abandoned |
|
November 17th, 2011, 06:09 PM | #12 |
ninjette.org member
Name: Pete
Location: Perth Australia
Join Date: Jun 2011 Motorcycle(s): 2009 ninja 250r Posts: 75
|
problem found, the cables that were sold to me were not the right ones, after a close examination there were a few differences that obviously made a huge difference, the cable was slightly thinner and longer but the main difference was the outer sheath was shorter.
__________________________________________________
|
|
November 17th, 2011, 09:19 PM | #13 | |
ninjette.org certified postwhore
Name: Bob
Location: CA
Join Date: Dec 2008 Motorcycle(s): '08 Ninja 250r, '14 CBR500r Posts: A lot.
|
Quote:
__________________________________________________
Honda Interceptor VFR800 DLX (2014, 8th gen) Honda CBR500r (2014) - FOR SALE Kawi Ninja 250r (2008) - Restored and passed-down within family, only to be abandoned |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Chain Slack | jeffb502 | 2008 - 2012 Ninja 250R Tech Talk | 11 | December 3rd, 2013 10:02 AM |
chain slack | eddiekay | 2008 - 2012 Ninja 250R Tech Talk | 8 | October 18th, 2011 05:40 PM |
Does my chain slack need adjusting? | kobachi | 2008 - 2012 Ninja 250R Tech Talk | 34 | July 16th, 2011 07:07 AM |
What if the closing throttle cable snaps? | Grn99Kawi | 1986 - 2007 Ninja 250R Tech Talk | 9 | September 16th, 2009 09:15 AM |
Chain Slack? | Xuracing | 2008 - 2012 Ninja 250R Tech Talk | 2 | June 9th, 2009 09:21 AM |
|
|