September 9th, 2009, 02:02 PM | #1 |
R&T Suspension
Name: K Hertell
Location: San Antonio, TEXAS
Join Date: Jun 2009 Motorcycle(s): Too many to list Posts: 175
|
For the old gen riders/racers out there
Team Von Schlecten Lebern finished 2nd overall on a 2002 Ninja 250 w/ the 2008 forks and wheels at the Cresson round of the CMRA races. We finished only 4 seconds behind 1st after 3 hrs of racing. We also set the fastest laps of the race on the old thing. If we had another lap or two we would have won, but thats racing.
|
|
September 29th, 2009, 04:45 AM | #2 |
Livin' the Minimoto Life
Name: Mark
Location: Riding around in TX
Join Date: Mar 2009 Motorcycle(s): 2022 Honda Navi, 2018 Z-125 Pro Posts: A lot.
|
So you all swapped the forks? Any machining required? I'm betting that you kept the triple off the '08 and just mounted all of that together?
DETAILS! (I want to mod mine that way)
__________________________________________________
--- My IG Page --- My FB page! --- 2022 Honda Navi && 2018 Z-125 Pro |
|
September 29th, 2009, 05:55 AM | #3 |
ninjette.org guru
Name: mike
Location: jackson, nj
Join Date: Jun 2009 Motorcycle(s): 2008 ninja 250 Posts: 271
|
after 3hrs 4 seconds that's amazing congrats.
|
|
September 29th, 2009, 08:21 AM | #4 |
R&T Suspension
Name: K Hertell
Location: San Antonio, TEXAS
Join Date: Jun 2009 Motorcycle(s): Too many to list Posts: 175
|
Thanks Mike.
To use the 17's you need the complete front end, triples, caliper etc. It it really easy to do. For the rear you need to mill the old gen caliper mount about 13mm thinner on one side. Then cut out the square tubing from the brake stay. Use some flat bar and weld it on on one of the ends towards one side of it and the other end on the other. Which will be 13mm offset to accomidate the milling of the caliper bracket. I drilled holes down the length of the flat bar to lighten it up a bit. I think thats it. But I'm doing this from memory. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[superbikeplanet.com] - PATA Honda To Test New Gen Riders At Jerez | Ninjette Newsbot | Motorcycling News | 0 | April 1st, 2014 07:50 AM |
Calling all Socal 250 racers/riders...come follow me! | Nemesis | Ninjettes At Speed | 8 | June 3rd, 2012 06:31 PM |
[sportrider - latest stories] - MotoGP Racers Colin Edwards and Freddie Spencer | Gen | Ninjette Newsbot | Motorcycling News | 0 | March 8th, 2012 06:40 PM |
Any 250 riders/racers gonna be @ Chuckwalla this weekend? | Nemesis | Ninjettes At Speed | 21 | September 12th, 2011 09:23 AM |
It's Fall - caution for new-gen riders. | Sailariel | General Motorcycling Discussion | 13 | September 19th, 2010 10:23 PM |
|
|