Why can't I find this!

Kawi25 · January 28th, 2017, 05:57 PM

I've already ordered the wrong one once, what's going on? Where can I buy one? I need a right side one. This is my left side but the po has them flipped side to side.

Motofool · January 28th, 2017, 06:31 PM

Those are all the same.
Rain drain hole is the only difference between laft and right.

CaliGrrl · January 28th, 2017, 09:27 PM

My right-side one is actually a flipped-over left side. No biggie.

Ghostt · January 28th, 2017, 10:45 PM

Try eBay, I get a lot of my parts from there.

spent_too_much · January 30th, 2017, 12:43 PM

Or, you could replace both with something like these. It might work out cheaper in the end, and less hassle too. This is what I did.

https://www.amazon.com/Bikemaster-St...r+turn+signals

Sirref · January 30th, 2017, 01:52 PM

I may have one of those laying around, I'll check on wed. If I do I'll send it to you for cost of shipping

Kawi25 · January 30th, 2017, 03:10 PM

I just decided to do flushmounts thanks any ways guys!

Ghostt · January 31st, 2017, 01:36 AM

Quote:

Originally Posted by Kawi25

I just decided to do flushmounts thanks any ways guys!

I can personally recommend these if your looking for flush mounts

Mad Hornet's flushmount front turn signals /AsianCycle flush-mounts clones

Kawi25 · February 4th, 2017, 07:56 PM

Im hsing the carbon fiber / smoked lens signals from street-lites. Fits the theme i will be going with.

InvisiBill · February 5th, 2017, 07:11 AM

Quote:

Originally Posted by Kawi25

I've already ordered the wrong one once, what's going on? Where can I buy one? I need a right side one. This is my left side but the po has them flipped side to side.

FYI, that appears to be an '06-'07 turn signal. The older bikes used the more squared turn signals.

https://www.kawasaki.com/Parts/Parts...2003/EX250-F17 vs. https://www.kawasaki.com/Parts/Parts.../2007/EX250F7F

You probably bought the right part for your bike, which doesn't match the broken one that was already installed on it.

January 28th, 2017, 06:31 PM	#2
Motofool Daily Ninjette rider Name: Hernan Location: Florida Join Date: Mar 2011 Motorcycle(s): 2007 Ninja 250 Posts: A lot. MOTY - 2016, MOTM - Dec '12, Jan '14, Jan '15, May '16	Those are all the same. Rain drain hole is the only difference between laft and right. __________________________________________________ *Motofool* *.................................Never ride faster than your guardian angel can fly* "Mankind is composed of two sorts of men — those who love and create, and those who hate and destroy. Love is the bond between men, the way to teach and the center of the world." - José Martí

January 28th, 2017, 10:45 PM	#4
Ghostt in your machine Name: Scott Location: Summer Shade, Ky. Join Date: Oct 2014 Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN" Posts: A lot. Blog Entries: 25 MOTM - Jun '17, May '16, Mar '15	Try eBay, I get a lot of my parts from there. __________________________________________________ *violente et ignorantia* ZX-2R BLOG *Twitter and Instagram = Ghostt_Scott* *I'm not here to change your mind, just to inform.*

January 30th, 2017, 12:43 PM	#5
spent_too_much ninjette.org guru Name: Miguel Location: TN Join Date: Jan 2015 Motorcycle(s): 2000 EX-250; several other years of the same Posts: 460	Or, you could replace both with something like these. It might work out cheaper in the end, and less hassle too. This is what I did. https://www.amazon.com/Bikemaster-St...r+turn+signals __________________________________________________ ... can't stop updating the bike!

January 30th, 2017, 01:52 PM	#6
Sirref Private Joker Name: Ben Location: Towson, MD Join Date: Nov 2012 Motorcycle(s): '99/'01 Ninja 250 "sketchy", '13 Ninja 300 "yoshi", '03 GSXR 600 "merlin" Posts: A lot. MOTM - Mar '14	I may have one of those laying around, I'll check on wed. If I do I'll send it to you for cost of shipping __________________________________________________ I see you over there seeing me, do you see the me I think you see?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
can't find the link	Josh_kcco	1986 - 2007 Ninja 250R Farkles	1	May 16th, 2014 02:52 PM
Can't find what bolts to use?!	2fidyswag	2008 - 2012 Ninja 250R Farkles	6	January 22nd, 2014 02:46 PM
Can you find the .....	g21-30	Off-Topic	1	December 22nd, 2010 08:11 AM
need help to find out where these screws should go	mrkyo	2008 - 2012 Ninja 250R Tech Talk	13	March 20th, 2010 05:53 PM
where can i find the reserve?	mikelgabriel	2008 - 2012 Ninja 250R Tech Talk	9	December 30th, 2009 03:03 PM

January 28th, 2017, 09:27 PM	#3
CaliGrrl ninjette.org certified postwhore Name: Kerry Location: Ventura, CA Join Date: Jan 2016 Motorcycle(s): Ninja650 Posts: A lot. MOTM - Apr '18, Apr '17, Apr '16	My right-side one is actually a flipped-over left side. No biggie.

January 30th, 2017, 03:10 PM	#7
Kawi25 ninjette.org newbie Name: Daniel Location: Fort smith Join Date: Jan 2017 Motorcycle(s): 2003 zninja 250 Posts: 6	I just decided to do flushmounts thanks any ways guys!

February 4th, 2017, 07:56 PM	#9
Kawi25 ninjette.org newbie Name: Daniel Location: Fort smith Join Date: Jan 2017 Motorcycle(s): 2003 zninja 250 Posts: 6	Im hsing the carbon fiber / smoked lens signals from street-lites. Fits the theme i will be going with.