Post the Best Picture of Your Baby!! - Page 17

welcome2thedawn · September 25th, 2009, 12:52 AM

Quote:

Originally Posted by yokozuna

not my bike, just wanted to share with u guys.

super clean bike!!! you said the seat taken off a ducati? what is the swing arm?

Racer x · September 26th, 2009, 06:47 AM

A shot from the line up at maxton last week

Plasma · September 26th, 2009, 07:05 AM

Quote:

Originally Posted by Racer x

A shot from the line up at maxton last week

NICE!!!

so howd it go partner?

Racer x · September 26th, 2009, 07:13 AM

Thanks for asking
Saturday was bad .I had a cracked spark plug? so I waisted all day sorting that out . Meanwhile the record I was chasing went from 101 mph to 104mph . Sunday the wind picked up and was mostly a head wind to boot. I was over geared for that wind so I went through in fifth gear at 105.290mph to take the MPS/BF 350-4 record.

Plasma · September 26th, 2009, 08:09 AM

Quote:

Originally Posted by Racer x

Thanks for asking
Saturday was bad .I had a cracked spark plug? so I waisted all day sorting that out . Meanwhile the record I was chasing went from 101 mph to 104mph . Sunday the wind picked up and was mostly a head wind to boot. I was over geared for that wind so I went through in fifth gear at 105.290mph to take the MPS/BF 350-4 record.

mm i c....
how the hell did u crack a spark plug bud...

Racer x · September 26th, 2009, 08:24 AM

Sorry for jacking this thread.
I don't know what happen. It was on the dyno and got 32 + hp the bike was running great . I went home and checked the plugs and finished race preparing the bike . Everything seemed normal. The bike ran fine till I left the starting line then it started misfiring BAD . Idle was normal but under load it would not go. I pulled the tank and when I pulled the plug wire the plug came out with the wire. I spent a couple hours getting the thread out .
I guess I overtightened it . (don't think so ) or from pulling the plug to get the jetting I weakened the thread . either way it was MY fault

kkim · September 26th, 2009, 10:12 AM

Man!! It's ugly. I've never seen a plug come apart quite like that before. Could you unscrew the threaded part out of the engine spark plug hole or did you have to do surgery?

Racer x · September 26th, 2009, 10:19 AM

I tried to get a tiny screwdriver down there and hook the ground electrode . That would not work .Just before giving up a fellow racer came up with an extractor . The kind that never work . It worked.
How do you like the burn though ? That is with 118 jets on race gas . I went to 115s and VP MR9 . the plugs came out white after that . On pump gas I had to go down to 110s . Now I have real jacked the thread Sorry.

kkim · September 26th, 2009, 10:29 AM

the ugly plug you pictured looks a "tad" rich to me. I'd step it down one main jet size and be happy unless you are experiencing denotation. seems like you've found the "edge" on the jetting.

yeah, start another thread on plug reading and jetting and I think a lot of discussion will result.

ScorpionNinja · September 26th, 2009, 05:02 PM

Quote:

Originally Posted by Racer x

Sorry for jacking this thread.
I don't know what happen. It was on the dyno and got 32 + hp the bike was running great . I went home and checked the plugs and finished race preparing the bike . Everything seemed normal. The bike ran fine till I left the starting line then it started misfiring BAD . Idle was normal but under load it would not go. I pulled the tank and when I pulled the plug wire the plug came out with the wire. I spent a couple hours getting the thread out .
I guess I overtightened it . (don't think so ) or from pulling the plug to get the jetting I weakened the thread . either way it was MY fault

aye, just slap in a Champion CJ-8 in there! (they fit everything)

ScorpionNinja · September 27th, 2009, 06:57 AM

new fav...

gogoKawi · October 9th, 2009, 02:39 PM

I finally have her together. Just put on the HMF slip-on. One more thing to do, and that's the frame sliders. Can't wait until the Green Bandit is done!

Reswob · October 13th, 2009, 05:04 PM

noche_caliente · October 13th, 2009, 05:53 PM

nice lighting effect Josh

Xerxi · October 16th, 2009, 01:02 AM

Since most ninjas looks the same on the side, i decided to show from my seat =)

paterick4o8 · October 16th, 2009, 01:03 AM

welcome, Xerxi

noche_caliente · October 17th, 2009, 07:45 AM

Quote:

Originally Posted by paterick4o8

welcome, Xerxi

What grips are those?

mike_sema · October 17th, 2009, 10:07 AM

this is one was taken a few months back

X-Racer · October 17th, 2009, 11:42 AM

Quote:

Originally Posted by yokozuna

not my bike, just wanted to share with u guys.

Is Ninja prettiest I've ever seen. Now out of curiosity how much was the investment?

Xerxi · October 17th, 2009, 06:27 PM

progrip 719
http://www.motorcycle-superstore.com...-Gel-Grip.aspx

yokozuna · October 17th, 2009, 10:12 PM

not my bike, just wanted to share with u guys

Nemesis · October 17th, 2009, 10:40 PM

Great pics guys!

I'm really tempted to post a pic of my bike but I was told not to till the project is complete. Sadness!

Maybe I can do a teaser but I'll have to ask. Double sadness!

brian smith · October 25th, 2009, 05:08 PM

Better Location: Lighthouse in Marblehead, Ohio

ScorpionNinja · October 31st, 2009, 05:32 PM

Ninja of the KoRn!!

Kawasabi · November 2nd, 2009, 08:36 AM

BlueTyke · November 2nd, 2009, 09:49 AM

Update:

drumr9 · November 2nd, 2009, 12:03 PM

Update! The new beast in the house...

Snake · November 2nd, 2009, 12:19 PM

Very nice looking bike drumr9. How do you like it?

drumr9 · November 2nd, 2009, 12:37 PM

I have to say that I LOVE it!! I liked the 250 alot, and had it been possible i would've kept it, but yeah this is a great bike.... more than enough power, just have to get used to the lower handlebars!

CRXTrek · November 2nd, 2009, 12:53 PM

Quote:

Originally Posted by drumr9

Update! The new beast in the house...

Quote:

Originally Posted by drumr9

I have to say that I LOVE it!! I liked the 250 alot, and had it been possible i would've kept it, but yeah this is a great bike.... more than enough power, just have to get used to the lower handlebars!

Great Bike

Post up here The Ex-Ninjetters Liar and keep us updated with your thoughts and experiences of your move up to the SS

paterick4o8 · November 2nd, 2009, 02:22 PM

I'm jealous of you Eddie. That's the bike I have my eyes set upon.. got to ride it once and it was a blast.

have fun and

safe!

drumr9 · November 2nd, 2009, 04:02 PM

Thanks Patrick, much appreciated... I lucked out, i was able to get a good deal on it! And youre totally right its a blast everytime

yokozuna · November 11th, 2009, 05:49 AM

crazy 250 mod with fat 200mm rear tyre

CZroe · November 11th, 2009, 06:41 AM

Quote:

Originally Posted by yokozuna

crazy 250 mod with fat 200mm rear tyre

*snip*

Wait, that Ducati-style ducktail has TWO sets of turn signals?

I really want one but so far ztrack157 hasn't located one for me with Candy Plasma Blue.

CZroe · November 11th, 2009, 06:51 AM

Quote:

Originally Posted by yokozuna

crazy 250 mod with fat 200mm rear tyre

*snip*

So the Ducati-style ducktail has TWO sets of blinkers?

ztrack157 has been looking for a blue one for me (he imports Indonesian 250 mods and is the official USA distributor for Indonesia's own Sportisi Motorsports).

yokozuna · November 11th, 2009, 06:55 AM

yup 2 signal.
i think most of indonesian customized shop carry this undertail, you can contact bram sportisi or ztrack157 i'm sure they can manage to send 1 for you

CZroe · November 11th, 2009, 07:02 AM

Quote:

Originally Posted by yokozuna

yup 2 signal.
i think most of indonesian customized shop carry this undertail, you can contact bram sportisi or ztrack157 i'm sure they can manage to send 1 for you

Good because for a second there I thought that I might have to buy an undertail also.

At least I don't have to worry about blocking the undertail turn signals with my plate.

It looks an awful lot like "AutoDrezz's (Joly's)" bike.

And, yeah, ztrak157 is already looking for one for me. He's just gotta find it in Candy Plasma Blue. Thanks!

yokozuna · November 11th, 2009, 07:10 AM

Quote:

Originally Posted by CZroe

Good because for a second there I thought that I might have to buy an undertail also.

At least I don't have to worry about blocking the undertail turn signals with my plate.

It looks an awful lot like "AutoDrezz's (Joly's)" bike.

And, yeah, ztrak157 is already looking for one for me. He's just gotta find it in Candy Plasma Blue. Thanks!

maybe because this is his bike

CZroe · November 11th, 2009, 07:25 AM

Quote:

Originally Posted by yokozuna

maybe because this is his bike

I figured so but I spotted a couple differences from the pics that I knew were his.

Things probably change quickly!

250Rocket · November 11th, 2009, 07:38 AM

October 13th, 2009, 05:53 PM	#654
noche_caliente ninjette.org certified postwhore Name: Kim Location: mundo de ensueño Join Date: Nov 2008 Motorcycle(s): '08 250 Posts: A lot.	nice lighting effect Josh __________________________________________________ Progrip tank pad, blue rim stripes, blue Pazzos, Roaring Toyz lowering kit, Puig DB in dark smoke, Cortech sport tail, super mini tank, and saddlebags, OES swingarm spools and Intuitive frame sliders

November 2nd, 2009, 09:49 AM	#666
BlueTyke So slow I'm first! Name: Sunny Location: San Jose, CA Join Date: Oct 2008 Motorcycle(s): 06 Kawasaki Ninja EX250 Posts: A lot. Blog Entries: 10	Update: __________________________________________________ Learn from the mistakes of others, you cannot make them all yourself. Save yourself the trouble and Learn.

November 2nd, 2009, 12:37 PM	#669
drumr9 ninjette.org member Name: Eddie Location: Hollywood/Hacienda Heights, CA Join Date: Aug 2009 Motorcycle(s): 09 Ninja 250(Gone), 09 GTS IE Vespa, 09 Monster ZX-6R Posts: 24	I have to say that I LOVE it!! I liked the 250 alot, and had it been possible i would've kept it, but yeah this is a great bike.... more than enough power, just have to get used to the lower handlebars! Last futzed with by drumr9; November 2nd, 2009 at 12:38 PM. Reason: updating

November 11th, 2009, 07:38 AM	#680
250Rocket ninjette.org member Name: Rob Location: Montreal, Canada Join Date: Apr 2009 Motorcycle(s): '09 Ninja 250R Posts: 171	__________________________________________________ Back on the road again Season 2010 Dam it feels good!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Post A Current Picture Of Your Area!	Brian	Pictures	214	November 18th, 2014 04:01 AM
My first picture post - 2008 Ninja	joshuajcrouch	Pictures	9	August 9th, 2012 02:39 PM
My Baby on My Baby	Gfortunes	Pictures	9	October 3rd, 2011 09:39 PM
[superbikeplanet.com] - Picture of Ben Bostrom's Post-Crash Ass. Not For the Faint of	Ninjette Newsbot	Motorcycling News	0	September 10th, 2009 01:51 PM
[topix.net] - Harley Baby Clothing: Buying Harley Davidson Baby Clothes	Ninjette Newsbot	Motorcycling News	0	August 6th, 2009 10:50 PM

September 26th, 2009, 07:13 AM	#644
Racer x ninjette.org certified postwhore Name: Eric Location: Iowa City Join Date: May 2009 Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X Posts: A lot. Blog Entries: 54 MOTM - Sep '18, Feb '16	Thanks for asking Saturday was bad .I had a cracked spark plug? so I waisted all day sorting that out . Meanwhile the record I was chasing went from 101 mph to 104mph . Sunday the wind picked up and was mostly a head wind to boot. I was over geared for that wind so I went through in fifth gear at 105.290mph to take the MPS/BF 350-4 record.

September 26th, 2009, 10:12 AM	#647
kkim Join Date: Nov 2008 Posts: Too much.	Man!! It's ugly. I've never seen a plug come apart quite like that before. Could you unscrew the threaded part out of the engine spark plug hole or did you have to do surgery?

September 26th, 2009, 10:19 AM	#648
Racer x ninjette.org certified postwhore Name: Eric Location: Iowa City Join Date: May 2009 Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X Posts: A lot. Blog Entries: 54 MOTM - Sep '18, Feb '16	I tried to get a tiny screwdriver down there and hook the ground electrode . That would not work .Just before giving up a fellow racer came up with an extractor . The kind that never work . It worked. How do you like the burn though ? That is with 118 jets on race gas . I went to 115s and VP MR9 . the plugs came out white after that . On pump gas I had to go down to 110s . Now I have real jacked the thread Sorry.

September 26th, 2009, 10:29 AM	#649
kkim Join Date: Nov 2008 Posts: Too much.	the ugly plug you pictured looks a "tad" rich to me. I'd step it down one main jet size and be happy unless you are experiencing denotation. seems like you've found the "edge" on the jetting. yeah, start another thread on plug reading and jetting and I think a lot of discussion will result.

October 13th, 2009, 05:04 PM	#653
Reswob ninjette.org sage Name: Josh Location: Richmond VA Join Date: Oct 2009 Motorcycle(s): 2008 Triumph Bonneville Black Posts: 627

October 16th, 2009, 01:03 AM	#656
paterick4o8 ninjette.org sage Name: patricK Location: San Jose, CA--BAY AREA! Join Date: Mar 2009 Motorcycle(s): '08 blue 250R [sold]. '09 lime ZX-6R [stolen :( ]. '06 blue 636. Posts: 918	welcome, Xerxi

October 17th, 2009, 06:27 PM	#660
Xerxi ninjette.org member Name: Xerxi Location: san jose Join Date: Jun 2009 Motorcycle(s): Red 2009 ninja 250 Posts: 21	progrip 719 http://www.motorcycle-superstore.com...-Gel-Grip.aspx

October 17th, 2009, 10:12 PM	#661
yokozuna ninjette.org member Name: yokozuna Location: Indonesia Join Date: Jun 2009 Motorcycle(s): Ninja 08 Posts: 35	not my bike, just wanted to share with u guys

October 17th, 2009, 10:40 PM	#662
Nemesis CVMA #74 WSMC #750 Name: Nemesis Location: On the track Join Date: Oct 2009 Motorcycle(s): All of them Posts: A lot.	Great pics guys! I'm really tempted to post a pic of my bike but I was told not to till the project is complete. Sadness! Maybe I can do a teaser but I'll have to ask. Double sadness!

November 2nd, 2009, 12:03 PM	#667
drumr9 ninjette.org member Name: Eddie Location: Hollywood/Hacienda Heights, CA Join Date: Aug 2009 Motorcycle(s): 09 Ninja 250(Gone), 09 GTS IE Vespa, 09 Monster ZX-6R Posts: 24	Update! The new beast in the house...

November 2nd, 2009, 12:19 PM	#668
Snake ninjette.org certified postwhore Name: Rick Location: Alexandria, Louisiana Join Date: Jan 2009 Motorcycle(s): 05 Blue Ninja 250 Posts: Too much. MOTY - 2017, MOTM - Jan '19, Oct '16, May '14	Very nice looking bike drumr9. How do you like it?

November 2nd, 2009, 02:22 PM	#671
paterick4o8 ninjette.org sage Name: patricK Location: San Jose, CA--BAY AREA! Join Date: Mar 2009 Motorcycle(s): '08 blue 250R [sold]. '09 lime ZX-6R [stolen :( ]. '06 blue 636. Posts: 918	I'm jealous of you Eddie. That's the bike I have my eyes set upon.. got to ride it once and it was a blast. have fun and safe!

November 2nd, 2009, 04:02 PM	#672
drumr9 ninjette.org member Name: Eddie Location: Hollywood/Hacienda Heights, CA Join Date: Aug 2009 Motorcycle(s): 09 Ninja 250(Gone), 09 GTS IE Vespa, 09 Monster ZX-6R Posts: 24	Thanks Patrick, much appreciated... I lucked out, i was able to get a good deal on it! And youre totally right its a blast everytime

November 11th, 2009, 05:49 AM	#673
yokozuna ninjette.org member Name: yokozuna Location: Indonesia Join Date: Jun 2009 Motorcycle(s): Ninja 08 Posts: 35	crazy 250 mod with fat 200mm rear tyre

November 11th, 2009, 06:55 AM	#676
yokozuna ninjette.org member Name: yokozuna Location: Indonesia Join Date: Jun 2009 Motorcycle(s): Ninja 08 Posts: 35	yup 2 signal. i think most of indonesian customized shop carry this undertail, you can contact bram sportisi or ztrack157 i'm sure they can manage to send 1 for you