|
June 12th, 2013, 04:53 PM
|
#1 |
|
ninjette.org sage
Name: Abhijit
Location: San Francisco
Join Date: Nov 2011 Motorcycle(s): Many Two Wheels .. Posts: 611
|
2007 Ninja 250 Service Manual
Anyone has a link to a service manual ? I need to check 2 things please ...
Thickness Spec recording of Clutch Metal Plate [Not the Friction Plate] Orientation of Metal Plate .. which surface faces towards bike and which surface face away from the bike [towards installer, i.e. you] Thanks !
__________________________________________________
[ex-AFM #828 | SMUSA #828 | Sponsors : MotionPro | LeoVince | Insurrection Racing Gloves | QstarZ Laptimers + OEM Parts @ 30-40% OFF : Harry @ 1-877-437-1631,17 harry@hondaeasttoledo.com |
|
|
|
June 12th, 2013, 04:59 PM
|
#2 |
|
ninjette.org certified postwhore
Name: Eric
Location: Iowa City
Join Date: May 2009 Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
|
Also I can't figure out what this part means. This photo is from the 2008 service manual.
__________________________________________________
Top speed 123.369mph. Ohio mile Worlds fastest 250 ninja |
|
|
|
|
June 12th, 2013, 05:03 PM
|
#3 |
|
ninjette.org sage
Name: Abhijit
Location: San Francisco
Join Date: Nov 2011 Motorcycle(s): Many Two Wheels .. Posts: 611
|
Eric - are you referring to the "A" , "B" , "C" , "D" thickness? If so, i scratched my head on it and couldnt figure out what the manual is wanting us to check. The tabs will fit in either of the tooth spacing. The block sizes are different yes .... but what is the manual referring to being narrow & wider?
Ohh and the A,B,C,D,E,F gear marking table is for another reference. check Page 6-9. All i did was align the U notch (2 on each friction plate) and install them. From the other 2007 DIY Clutch Install, the 2008+ do not have any "horse-shoe" stamping for orientation.
__________________________________________________
[ex-AFM #828 | SMUSA #828 | Sponsors : MotionPro | LeoVince | Insurrection Racing Gloves | QstarZ Laptimers + OEM Parts @ 30-40% OFF : Harry @ 1-877-437-1631,17 harry@hondaeasttoledo.com |
|
|
|
|
June 12th, 2013, 05:08 PM
|
#4 |
|
ninjette.org certified postwhore
Name: Eric
Location: Iowa City
Join Date: May 2009 Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
|
I have new steels they measure 2.00mm thick. A stack is about 23.23 mm thick..
__________________________________________________
Top speed 123.369mph. Ohio mile Worlds fastest 250 ninja |
|
|
|
|
June 12th, 2013, 05:13 PM
|
#5 | |
|
ninjette.org sage
Name: Abhijit
Location: San Francisco
Join Date: Nov 2011 Motorcycle(s): Many Two Wheels .. Posts: 611
|
Ok - Are these OEM ? ... can you measure the friction plates as well. [when measuring friction plate, include the block]
It will take me 2 hours to reach home and upload the pictures and current measurement. Quote:
__________________________________________________
[ex-AFM #828 | SMUSA #828 | Sponsors : MotionPro | LeoVince | Insurrection Racing Gloves | QstarZ Laptimers + OEM Parts @ 30-40% OFF : Harry @ 1-877-437-1631,17 harry@hondaeasttoledo.com |
|
|
|
|
|
June 12th, 2013, 05:19 PM
|
#6 |
|
ninjette.org certified postwhore
Name: Eric
Location: Iowa City
Join Date: May 2009 Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
|
Looks like 3 mm for new Barnett and the OEM
__________________________________________________
Top speed 123.369mph. Ohio mile Worlds fastest 250 ninja |
|
|
|
|
June 12th, 2013, 09:51 PM
|
#7 |
|
ninjette.org sage
Name: Abhijit
Location: San Francisco
Join Date: Nov 2011 Motorcycle(s): Many Two Wheels .. Posts: 611
|
Found the manual. Looks like there is no mention of orientation of the face plate. Neither there is thickness spec for the plate. I will post my current specs in other thread.
__________________________________________________
[ex-AFM #828 | SMUSA #828 | Sponsors : MotionPro | LeoVince | Insurrection Racing Gloves | QstarZ Laptimers + OEM Parts @ 30-40% OFF : Harry @ 1-877-437-1631,17 harry@hondaeasttoledo.com |
|
|
|
 |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Newgen Service manual, owners manual & tool kit | Hero Danny | Motorcycle-related | 0 | September 20th, 2014 07:29 PM |
| 2007 and below ninja 250, NEW OEM rotor, Taillight integration, used: owners manual | Runeknight95 | Motorcycle-related | 4 | August 12th, 2013 03:02 PM |
| Need 08+ Ninja 250 Service Manual | abhijitz | 2008 - 2012 Ninja 250R Tech Talk | 8 | November 13th, 2011 10:58 PM |
| 2007 service manual supplement | slawson | Items Wanted | 2 | May 7th, 2011 05:00 PM |
|
|
