September 15th, 2012, 07:56 PM | #41 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
so here is a sample video of the gopro without and with housing...
without: http://youtu.be/TenxCwumtcg and with: http://youtu.be/NWmvBbWyTTA its making a really loud bloody clonking noise, which i noticed in the videos i took earlier in the day yesterday. has anyone experienced this? seems like something is loose, but i cant see anything moving, or wrong with the camera or housing... could the camera be loose inside the housing maybe? grr....
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
September 15th, 2012, 08:27 PM | #42 |
Lays er down
Name: Michael
Location: Maryland
Join Date: Apr 2012 Motorcycle(s): 2008 Lime green Ninja 250R Posts: A lot.
|
thats what mine sounds like, and everyone other video that uses a go pro. some people have suggested to put like a thin piece of foam inside with the camera to make it a tighter fit. but i havent had any real problems with mine
|
|
September 15th, 2012, 08:54 PM | #43 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
foam it is then... cos that loud clonkin sound is really annoying imo!
i just tested the non waterproof housing, and its better, will upload it once ive finished converting twist of the wrist for my iPad, lol ill try out some foam or something later~
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
September 15th, 2012, 09:54 PM | #44 |
ninjette.org newbie
Name: a
Location: c
Join Date: Sep 2012 Motorcycle(s): none Posts: 8
|
I put mine right on the front of the gas tank. It sits below the windshield and has enough view of the gauges and around the bike. I have one on top of my helmet too from my car track days.
http://www.youtube.com/watch?v=la2UY_Ywgzc |
|
October 12th, 2012, 10:22 AM | #45 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
helmet cam, worked out, and old fashioned hold-the-camera-in-hand too, ha ha
http://youtu.be/6C4MF3tHLUQ http://youtu.be/YHqs7D_4eik uploaded like 5 track vids
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
October 12th, 2012, 10:25 AM | #46 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
got a cool snapshot of a friend:
by the time he filmed me it was already darker, lighting wasn't quite enough...
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
October 14th, 2012, 06:38 PM | #47 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
does anyone know why Photobucket re-size my GIF animations? ive already re-sized it down to 200 pixels, so that its under 20 mb... but then after i upload it, they re-size the damn thing down to like 60 pixels....
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
October 14th, 2012, 06:51 PM | #48 |
Jigglin' your Jiglets
Name: Sean
Location: San Jose, Ca
Join Date: Jun 2011 Motorcycle(s): 2009 K1300S, 2013 Ninja 300, 2011 Ninja 250R, Faster than Unregistered's ninjette Posts: Too much.
Blog Entries: 1
MOTM - Apr '13
|
idk, mine work
__________________________________________________
If the Ninja 250 doesn't have enough power for you, then you don't know how to ride it. AFM #676 Supersports are for n00bs |
|
October 14th, 2012, 08:32 PM | #49 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
how big is that file?
i wonder if they re-size it because my GIF is too big... i did a time lapse of almost 1000 pictures. was putting together a friends R6 that he crashed... got the farings back from the paint workshop with the base coat, and wanted to make sure it was fitting back together before getting the paint done. 10 second time lapse, so managed to capture about 3 hours worth, on the assembly. Did another of taking it back apart, that was 380 frames, only an hour to tear it back down, lol but it took about 6 hours to assemble, epoxy some parts, and take it back down, lol but whats strange is that photobucket has a 25 Mb limit, the file im uploading is 19Mb. grr....
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
October 14th, 2012, 08:37 PM | #50 |
Jigglin' your Jiglets
Name: Sean
Location: San Jose, Ca
Join Date: Jun 2011 Motorcycle(s): 2009 K1300S, 2013 Ninja 300, 2011 Ninja 250R, Faster than Unregistered's ninjette Posts: Too much.
Blog Entries: 1
MOTM - Apr '13
|
Made this one too, idk whats up with your photobucket
__________________________________________________
If the Ninja 250 doesn't have enough power for you, then you don't know how to ride it. AFM #676 Supersports are for n00bs |
|
October 14th, 2012, 11:32 PM | #51 |
Jigglin' your Jiglets
Name: Sean
Location: San Jose, Ca
Join Date: Jun 2011 Motorcycle(s): 2009 K1300S, 2013 Ninja 300, 2011 Ninja 250R, Faster than Unregistered's ninjette Posts: Too much.
Blog Entries: 1
MOTM - Apr '13
|
Just tried a new one, as long as its under 20mb it works for me
__________________________________________________
If the Ninja 250 doesn't have enough power for you, then you don't know how to ride it. AFM #676 Supersports are for n00bs |
|
October 15th, 2012, 01:50 AM | #52 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
meh.... whats wrong with my damn dumb bucket of photos
btw, what program do you use to create the gif files?
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
October 15th, 2012, 11:45 AM | #53 |
Jigglin' your Jiglets
Name: Sean
Location: San Jose, Ca
Join Date: Jun 2011 Motorcycle(s): 2009 K1300S, 2013 Ninja 300, 2011 Ninja 250R, Faster than Unregistered's ninjette Posts: Too much.
Blog Entries: 1
MOTM - Apr '13
|
Movie2gif
__________________________________________________
If the Ninja 250 doesn't have enough power for you, then you don't know how to ride it. AFM #676 Supersports are for n00bs |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Gopro Mounting Placement and Mounts | JBinSD | Ninjettes At Speed | 9 | February 10th, 2014 04:57 PM |
Riding Positions | Alex | General Motorcycling Discussion | 9 | November 25th, 2013 05:30 AM |
Mounting gopro on gas tank. | LT505 | General Motorcycling Discussion | 30 | June 25th, 2013 11:15 AM |
Finally found a mounting position from my GoPro that I like | robmilchling | Videos | 11 | April 11th, 2012 08:12 PM |
[roadracingworld.com] - Send Us Your Favorite Road Atlanta Memory Or A Favorite Road | Ninjette Newsbot | Motorcycling News | 0 | April 11th, 2012 05:10 PM |
|
|